Author Topic: Original Windshield for '69  (Read 7848 times)

69Z28-RS

  • Hero Member
  • *****
  • Posts: 5778
  • owner since 4-Apr-1976
    • View Profile
Original Windshield for '69
« on: September 30, 2011, 09:34:15 PM »
My unrestored '69 Z28-RS has the PPG SOLEX DUPLATE type windshield, with a '69 date on it, but apparently this is a replacement, not the factory installation?   It was in the car in '76 when I bought it...

For an original 'unrestored' car, with all other glass original, should I replace this windshield with a repro?   

What is the best source for an original reproduction windshields?   Can you purchase with a correct date code?   US made windshield with correct thickness?  or a thinner foreign mfg?

Gary    69 Z28-RS
09C 69Z28-RS, 72 B 720 cowl console rosewood tint
69 Corvette, '60 Corvette, '72 Corvette
90 ZR1 red/red #246, 90 ZR1 white/gray #2466
72 El Camino, '55-'56-'57 Nomads, '55-'57 B/A Sedan

william

  • CRG Member
  • *****
  • Posts: 3119
    • View Profile
Re: Original Windshield for '69
« Reply #1 on: September 30, 2011, 09:47:36 PM »
Is all the other glass PPG?

I've seen a few Norwood '69s with PPG glass. I believe Pontiac used PPG. In production they didn't much care what was used.
Learning more and more about less and less...

IZRSSS

  • Guest
Re: Original Windshield for '69
« Reply #2 on: September 30, 2011, 11:07:05 PM »
This company was recommended by Jerry M. They can also date code the glass for you. Like with anything else, research them first.

http://www.psautoglass.com/

MyRed67

  • Hero Member
  • *****
  • Posts: 805
  • SZZLN 67
    • View Profile
Re: Original Windshield for '69
« Reply #3 on: October 01, 2011, 03:58:56 AM »
  I can verify psautoglass.com I got a Dated Windshield there for my early '67 Coupe, it is right on.  Guys name is Mike Wimmer he is very knowledgeable on these date codes.  Located in Janesville, WI. just south of Madison.  I live right in the area, was able to save shipping.   My car also had all original glass, but windshield was  cracked.
1967 Camaro  LOS  11A
Original Engine   Z - Tribute
Mike C.    NW - Illinois

firstgenaddict

  • Hero Member
  • *****
  • Posts: 2882
  • caretaker of 1971 LT1's 11130 & 21783
    • View Profile
    • Groome Family Automobiles
Re: Original Windshield for '69
« Reply #4 on: October 01, 2011, 04:52:36 PM »
IF the glass is not DOT marked it is an original, they started DOT marking glass in mid 69.
I have seen both LOF and PPG in 69's.
James
Collectin' Camaro's since "Only Rednecks drove them"
Current caretaker of 1971 LT1's - 11130 and 21783 Check out the Black 69 RS/Z28 45k mile Survivor and the Lemans Blue 69 Z 10D frame off...
https://plus.google.com/photos/112392262205377424364/albums?banner=pwa

IZRSSS

  • Guest
Re: Original Windshield for '69
« Reply #5 on: October 01, 2011, 05:10:55 PM »
Here's quite a bit of info referencing original glass...ever try decoding them?... barrels of fun.  :-\

http://www.camaros.org/glass.shtml#LOF

sixt9x33rs

  • Hero Member
  • *****
  • Posts: 980
    • View Profile
Re: Original Windshield for '69
« Reply #6 on: October 15, 2011, 11:59:52 AM »
My 69 Convertible built last week of April has PPG glass throughout.
'69 RS Z/28 65B, 711 Flat hood no spoiler, endura, 4:10 43K miles
69 X77 Z/28 69 69 711 Original Paint Unrestored (Sold)
'69 X66 Convertible 69B 712 auto, (Sold) 44K miles

x77-69z28

  • Hero Member
  • *****
  • Posts: 1058
    • View Profile
Re: Original Windshield for '69
« Reply #7 on: October 15, 2011, 07:55:55 PM »
my 05a z-28 has LOF on one side and ppg on the other!
69 Z/28 X77 burnished brown, 711 int 05A bought in 78
70 Z28 forrest green, green int, M40, bk vinyl roof PROJECT
99 SS hugger orange 6spd NO TTOPS bought new 1 of 54
15 z/28 Arctic white, A/C 505 HP #251

Oaklyss

  • Member
  • ***
  • Posts: 158
    • View Profile
Re: Original Windshield for '69
« Reply #8 on: October 16, 2011, 03:49:53 AM »
My unrestored '69 Z28-RS has the PPG SOLEX DUPLATE type windshield, with a '69 date on it, but apparently this is a replacement, not the factory installation?   It was in the car in '76 when I bought it...

For an original 'unrestored' car, with all other glass original, should I replace this windshield with a repro?   

What is the best source for an original reproduction windshields?   Can you purchase with a correct date code?   US made windshield with correct thickness?  or a thinner foreign mfg?

Gary    69 Z28-RS


My 04A 69 SS has the same windshield. I always thought is was a replacement but now I am not so sure. All my other windows are Soft-Ray LOF Safety Flo-Lite NV-10 DOT. My windshield is SUNSHADE   SOLEX    [ PPG  ]  W688 DOT.
69 RSSS ZL-2 4 speed, mint unrestored 04A LA built-SOLD
1968 GTCS mint unrestored original paint
1972 AMX 401 4 speed, cowl induction, twin-grip, A/C, unrestored, original paint
1963 Oldsmobile Jetfire factory Turbo and Methanol injection, 4 speed, posi, 1 of 4 known to exist

69Z28-RS

  • Hero Member
  • *****
  • Posts: 5778
  • owner since 4-Apr-1976
    • View Profile
Re: Original Windshield for '69
« Reply #9 on: October 17, 2011, 06:52:52 PM »
Is all the other glass PPG?   

I've seen a few Norwood '69s with PPG glass. I believe Pontiac used PPG. In production they didn't much care what was used.

William,  My car is a Norwood Production (09C) but NO ... No other PPG glass.  All the other glass (sides and rear) are:   

Soft Ray,  Safety LOF FLO-LITE    AS-2    IV  Solid tempered  

Gary
09C 69Z28-RS, 72 B 720 cowl console rosewood tint
69 Corvette, '60 Corvette, '72 Corvette
90 ZR1 red/red #246, 90 ZR1 white/gray #2466
72 El Camino, '55-'56-'57 Nomads, '55-'57 B/A Sedan

Charley

  • Hero Member
  • *****
  • Posts: 708
    • View Profile
Re: Original Windshield for '69
« Reply #10 on: October 17, 2011, 10:09:03 PM »
 I would leave it in. What type of sealant-gasket is holding it in ? Even if it was not orig I would much rather have a piece of glass that was installed in 69 or even 76 versus a repo.

MO

  • Hero Member
  • *****
  • Posts: 1132
    • View Profile
Re: Original Windshield for '69
« Reply #11 on: October 18, 2011, 01:36:43 AM »
"Even if it was not orig I would much rather have a piece of glass that was installed in 69 or even 76 versus a repo".

Ditto...

69Z28-RS

  • Hero Member
  • *****
  • Posts: 5778
  • owner since 4-Apr-1976
    • View Profile
Re: Original Windshield for '69
« Reply #12 on: October 18, 2011, 05:34:09 PM »
Thanks Charley...   that's generally my personal opinion as well.  I really *hate* to use reproduction parts..  and I don't want to on this car, unless the CRG consensus is that I should.  I can get a supposedly-correctly colored and marked/dated 'reproduction' windshield for around $400 ... but I believe they are slightly less thick now than the factory windshields..

I suppose I will just clean this one up ..and maybe remove it and reseal/re-install  if necessary. 


Gary
09C 69Z28-RS, 72 B 720 cowl console rosewood tint
69 Corvette, '60 Corvette, '72 Corvette
90 ZR1 red/red #246, 90 ZR1 white/gray #2466
72 El Camino, '55-'56-'57 Nomads, '55-'57 B/A Sedan

lynnbilodeau

  • Member
  • ***
  • Posts: 395
    • View Profile
Re: Original Windshield for '69
« Reply #13 on: October 18, 2011, 11:51:15 PM »
I would leave it in. What type of sealant-gasket is holding it in ? Even if it was not orig I would much rather have a piece of glass that was installed in 69 or even 76 versus a repo.

Is it true the repops are thinner?

Charley

  • Hero Member
  • *****
  • Posts: 708
    • View Profile
Re: Original Windshield for '69
« Reply #14 on: October 20, 2011, 01:35:07 PM »
Ones I have used are thinner but it has been a few years.