Author Topic: Muffler and Tail Pipe Clamps  (Read 4579 times)

TooManyReels

  • Member
  • ***
  • Posts: 254
    • View Profile
Muffler and Tail Pipe Clamps
« on: June 26, 2011, 01:09:33 AM »
Was there a patter in which the muffler and tail pipe clams were installled. Nuts straight down, 90 degree towards the front, 90 degree towards the rear, or were they installed randomly as they tighten them.
Eddie
Eddie
63 Chevy II SS 570hp 560tq.
69 Z28 X33 Cross Ram JL8

68Zproject

  • Hero Member
  • *****
  • Posts: 1868
    • View Profile
Re: Muffler and Tail Pipe Clamps
« Reply #1 on: June 26, 2011, 04:18:32 AM »
I think the AIM shows that detail.
68Z28

TooManyReels

  • Member
  • ***
  • Posts: 254
    • View Profile
Re: Muffler and Tail Pipe Clamps
« Reply #2 on: June 26, 2011, 12:18:35 PM »
I'm not familiar with AIM....I did a search on this site but got nothing back...
Eddie
63 Chevy II SS 570hp 560tq.
69 Z28 X33 Cross Ram JL8

IZRSSS

  • Guest
Re: Muffler and Tail Pipe Clamps
« Reply #3 on: June 26, 2011, 12:53:02 PM »
Eddie,

The AIM is the Assembly Instruction Manual. This should be at the top of the list for any 1st Gen owner's library. You can find them on EBay.

IZRSSS

  • Guest
Re: Muffler and Tail Pipe Clamps
« Reply #4 on: June 26, 2011, 12:54:04 PM »
...

IZRSSS

  • Guest
Re: Muffler and Tail Pipe Clamps
« Reply #5 on: June 26, 2011, 01:16:34 PM »
...

lakeholme

  • Hero Member
  • *****
  • Posts: 2497
  • 68-12D L30/M35
    • View Profile
Re: Muffler and Tail Pipe Clamps
« Reply #6 on: June 26, 2011, 01:49:43 PM »
Take a look at Ed's list of references.  He does a great job of covering the waterfront, including the AIM.  You can also find the AIM from suppliers. And at one point he shared an online site where you could download the 69 AIM (with a fast enough computer)....

http://www.camaros.org/forum/index.php?topic=40.0

And of course, there is the CRG Bibliography List. 

http://www.camaros.org/crgrefs.shtml
Phillip, HNR & NCR-AACA, Senior Master, Team Captain, Admin.,
Spring Southeastern Nationals chair, AACA National Director

IZRSSS

  • Guest
Re: Muffler and Tail Pipe Clamps
« Reply #7 on: June 26, 2011, 02:05:42 PM »
AI-MEN... ;)

TooManyReels

  • Member
  • ***
  • Posts: 254
    • View Profile
Re: Muffler and Tail Pipe Clamps
« Reply #8 on: June 26, 2011, 03:51:47 PM »
Marty, thanks as always...I will order one...

Eddie
Eddie
63 Chevy II SS 570hp 560tq.
69 Z28 X33 Cross Ram JL8