Author Topic: Rear End Cover - Replace or Repair?  (Read 7311 times)

jeff68

  • Member
  • ***
  • Posts: 432
    • View Profile
Rear End Cover - Replace or Repair?
« on: March 14, 2011, 05:53:07 PM »
The 12-bolt rear end cover on my car has quite a few pits in it from rust.  Some time ago, I sandblasted the cover then primed & painted it.  It looks good, but you can obviously still see the pits throught the paint.  I'll be doing a diff oil change when the car comes back from paint, so that will be the time to fix it.  I'm trying to decide if it is worth the effort to do 'body work' on the original cover. 

So, how are the reproduction covers?  HBC claims to have one that is better than everyone else's, but they also want a premium price for it.  Has anyone here used one of their covers?  I like the idea of a new cover, but don't like the idea of reproductions parts that look like reproductions.

Any opinions or recommendations are appreciated.  Thanks.
68 L30/M20 Convertible, Ash Gold
N10, F41, N34, Z21, ZJ9, Z87, D55, G80, P01, U17

rich69rs

  • Hero Member
  • *****
  • Posts: 1110
  • LF7/M35/Z22/Z87
    • View Profile
Re: Rear End Cover - Replace or Repair?
« Reply #1 on: March 15, 2011, 12:05:52 AM »
If it is just a cosmetic issue and not one of needed replacement, I'd vote for leaving the original one in place and skip any "body work" on it.  Really comes down to how critical the "appearance" is to you.  An original cover with "honest wear" to me is a better piece to look at than a brand new reproduction piece.

Just my 2 cents.  Good luck.

Richard
Richard Thomas
1969 RS

68camaroz28

  • Hero Member
  • *****
  • Posts: 2232
    • View Profile
Re: Rear End Cover - Replace or Repair?
« Reply #2 on: March 15, 2011, 01:16:04 AM »
If the car can sit for awhile, spray it with polyester (body shop can easily) body filler, let it dry well, and sand it down. It should fill all the minor rust pits and look like new. Nice to keep the orig. piece IMHO.
Just a suggestion......
Chick
68 Z/28 NOR 01B Orig motor/trans/rear
69 Z/28 NOR 07A Orig Block & GM Cross-ram/carbs
69 L34 Rest. Nova Father/Son Car
69 L78 Surv Nova Purch 4/69 31K miles
67 L89 Corv Tribute
68 Corv 427/400 Orig motor
07 Corv Z06
R 68Z build- http://www.camaros.net/forums/showthread.php?t=182584

william

  • CRG Member
  • *****
  • Posts: 3119
    • View Profile
Re: Rear End Cover - Replace or Repair?
« Reply #3 on: March 15, 2011, 01:58:01 AM »
Our '67 Z/28 had a pitted rear cover also. I must have rattle-canned filler primer/steel-wooled it 25 times to get it smooth.
Learning more and more about less and less...

jeff68

  • Member
  • ***
  • Posts: 432
    • View Profile
Re: Rear End Cover - Replace or Repair?
« Reply #4 on: March 15, 2011, 02:08:40 PM »
Nice to keep the orig. piece IMHO.
I hear you Chick.  I usually try to avoid reproduction parts.  I guess the rear end cover should be no different.  Like Rich said, an "honest" factory-original part is hard to beat or find fault with.  The car has always been a Connecticut car, driven 160,000 miles year-round.  It's earned every pit on the cover.

The decision has been made to keep the original cover. 
68 L30/M20 Convertible, Ash Gold
N10, F41, N34, Z21, ZJ9, Z87, D55, G80, P01, U17

l88z16

  • Member
  • ***
  • Posts: 28
    • View Profile
Re: Rear End Cover - Replace or Repair?
« Reply #5 on: March 16, 2011, 02:28:18 AM »
How do you tell an original cover from a repo????I bought one off Ebay that is supposed to be an original but it looks to nice to be.

tom

  • Hero Member
  • *****
  • Posts: 1146
    • View Profile
    • Discount Internet Services
Re: Rear End Cover - Replace or Repair?
« Reply #6 on: March 17, 2011, 01:43:53 AM »
That cover must have been on a LOT of cars from the day. You should be able to find a nice original one at a bone yard or a swap.
69 X11 Z21 L14 glide
looking for a 69 export model (KPH) speed
o

1968RSZ28

  • Hero Member
  • *****
  • Posts: 6188
    • View Profile

jeff68

  • Member
  • ***
  • Posts: 432
    • View Profile
Re: Rear End Cover - Replace or Repair?
« Reply #8 on: April 04, 2011, 03:40:57 PM »
That doesn't look like mine.  It has a notch in the edge and mine doesn't.
68 L30/M20 Convertible, Ash Gold
N10, F41, N34, Z21, ZJ9, Z87, D55, G80, P01, U17

67 RS Ragtop

  • Member
  • ***
  • Posts: 102
    • View Profile
Re: Rear End Cover - Replace or Repair?
« Reply #9 on: April 04, 2011, 03:51:59 PM »
Jeff,

  Are you sure?? The cutout is usually where the flexible brake hose / fitting bolts, hence the reason for the cutout, so that it mounts "flat" to the housing.

x77-69z28

  • Hero Member
  • *****
  • Posts: 1058
    • View Profile
Re: Rear End Cover - Replace or Repair?
« Reply #10 on: April 04, 2011, 08:52:12 PM »
that is a 1970 rear end cover. 69 did not have the notch. it will fit, and probably replaced the 69 cover
69 Z/28 X77 burnished brown, 711 int 05A bought in 78
70 Z28 forrest green, green int, M40, bk vinyl roof PROJECT
99 SS hugger orange 6spd NO TTOPS bought new 1 of 54
15 z/28 Arctic white, A/C 505 HP #251

Gramps69Z

  • Hero Member
  • *****
  • Posts: 653
  • 69 X33 D80
    • View Profile
Re: Rear End Cover - Replace or Repair?
« Reply #11 on: April 04, 2011, 09:03:44 PM »
My 69 10E car does not have the notch.   The brake hose is held by an offset bracket with bolt.
Captain John Wykoff
Destin Fire:   October 31, 2015 at 0700--Officially Retired

Boston14

  • Member
  • ***
  • Posts: 252
    • View Profile
Re: Rear End Cover - Replace or Repair?
« Reply #12 on: April 04, 2011, 10:19:33 PM »
My 69 11D car is like Capt. John's  -  no notch, offset bracket.

boston14

1969 SS/RS 350 Convertible
Dover White with Black Top and D90 stripe, Red Standard Interior

 

anything