Author Topic: General Question  (Read 1057 times)

Chuck-68-Cam

  • Member
  • ***
  • Posts: 161
  • It is what it is
    • View Profile
General Question
« on: July 26, 2022, 08:11:37 PM »
I am looking at my old install of the harness to fuse box. It looks like they had the box mounted of the fire wall liner. My new fuse box has a seal on it. Should I cut away that liner and mount the gasket directly to the inner fire wall or bolt it up over top like the old on was? I am thinking it should not be over top of the liner.
Chuck

68 Camaro SST 350/TH400

z28z11

  • Hero Member
  • *****
  • Posts: 1853
    • View Profile
Re: General Question
« Reply #1 on: July 27, 2022, 01:53:22 AM »
Right reasonably sure the seal goes flat on the firewall, else how would it seal ? I don't remember my firewall pad under the fuse panel when I took it out - try the AIM for the assembly sequence.

Regards,
Steve
1968 Z28 M21/U17 BRG/W 1967 Chevy ll Nova SS 
1969 Z28 X77/M20/VE3 LeMans/W
1969 L78 X66/N66 Cortez/BVT
1969 Z11 L48/M35/C60/C06  1949 3100 5wd 235/6

Chuck-68-Cam

  • Member
  • ***
  • Posts: 161
  • It is what it is
    • View Profile
Re: General Question
« Reply #2 on: July 27, 2022, 01:26:21 PM »
Thanks Steve.

Yea, I looked through it and did not see anything definitive. But I am with you. I think I will trim the liner to get that seal.
Chuck

68 Camaro SST 350/TH400

 

anything