Original 67-69 Camaro driveshafts - information requested about your car

[vtfb68]

BC,
Here is some data points: 1968 LA 05C, 396 (MW), M-21 BR rear end, 50 1/2"Drive shaft, in-line, U-bolts, Three stripes near the yoke (orange, orange (or maybe blue),  and white.
    The car should be a 05B, but 05A and 05B's don't exist
   Victor

[bcmiller]

vtfb68,

Thank You.  Can you get a pic of the stripes?

[vtfb68]

bc,
  Can you PM me your e-mail or cell number ? I am unable to post. The pictures are in my phone.
     VT

[bcmiller]

bc,   Can you PM me your e-mail or cell number ? I am unable to post. The pictures are in my phone.      VT

VT - pm sent.

[vtfb68]

BC,
   My yoke is marked with sublime green paint.
       Victor

[bcmiller]

vtfb68,

The pics you sent to my email were too small to use.  Can you send larger files to my email please?

[69Z28-RS]

BC,
   My yoke is marked with sublime green paint.
       Victor

.. 'sublime'?   someone has replaced your yoke with a '70's Dodge product!   

[vtfb68]

Yeah, maybe. They stamped a lot of PTB's on Norwood built cars too.
      VT

[BillOhio]

My driveshaft appears to have both u joints marked

[ko-lek-tor]

Parts car: 9N584420 6cyl. glide, Axle= (10 bolt 2.73 single track) BP0122G2
Other than shoddy bodywork, 1/4's replaced, repaint and being rusted out,the car appeared to be in a mostly untouched, original, low mile all GM car.
Year of car 1969
Norwood  car
Month and week of vehicle assembly =2nd week of Jan. (est.)
Engine= 6 cyl
Transmission= P-Glide
Driveshaft length (measured center of u joint to center of u joint)49.56 in.
Driveshaft casting number ?
Type of attachment to pinion yoke.= U-Bolts.
Code stamped on front of passenger side axle tube.= BP 2.73 10 blt. Single track
Paint stripes –Edit(12-17-15) Orange & White
Position of the u-joint flanges= "clocked" about 30 degrees off from each other

Edited D.S. color

[ko-lek-tor]

Parts car: 9N584420 6cyl. glide, Axle= (10 bolt 2.73 single track) BP0122G2
Other than shoddy bodywork, 1/4's replaced, repaint and being rusted out,the car appeared to be in a mostly untouched, original, low mile all GM car.
Year of car 1969
Norwood  car
Month and week of vehicle assembly =2nd week of Jan. (est.)
Engine= 6 cyl
Transmission= P-Glide
Driveshaft length (measured center of u joint to center of u joint)49.56 in.
Driveshaft casting number ?
Type of attachment to pinion yoke.= U-Bolts.
Code stamped on front of passenger side axle tube.= BP 2.73 10 blt. Single track
Paint stripes –Edit(12-17-15) Orange & White
Position of the u-joint flanges= "clocked" about 30 degrees off from each other

Edited D.S. stripe colors

http://www.camaros.org/forum/index.php?action=post;msg=122493;topic=7861.135#

[bcmiller]

OK, got it.  1969, 6 cylinder with PG and 2.73 ten bolt open. 

Thank You!

[69Z28-RS]

Summarizing from my post to a different thread re my driveshaft (I had previously posted that I'd cleaned and painted my driveshaft long ago, but that driveshaft was from my Nomad, not the Z28..  thankfully!)..  So I found my original driveshaft and cleaned, measured it and photographed it.
http://www.camaros.org/forum/index.php?topic=14017.15

Car:   09C (late) '69 Z28 with 302, M20 and 3.73 posi rear gear (all original to the car) owned since 1976, not driven since 1980.

Drive shaft length:  49-5/8" from U-joint center to U-joint center.
Paint stripes:   Orange and White stripes at the 11-13" mark from the Yoke end; yellow splash around 10" along...

[cook_dw]

1.  68
2.  NOR
3.  03D
4.  L78
5.  M21
6.  50.5"
7.  U bolts
8.  BT
9.  Hard to tell at this point but appear to be orange and white.  Possibly a 3rd
10.  In-line

[cook_dw]

Additional pics