Author Topic: Outside mirror  (Read 5332 times)

creeka

  • Newbie
  • *
  • Posts: 1
    • View Profile
Outside mirror
« on: February 19, 2007, 08:44:07 PM »
A few  years ago I purchased a new old stock outside rear view mirror for my 67 RS.  The problem I'm having is that it flops down in the wind when I'm driving.  Does anyone have a way of tightening these mirrors.  It's in great shape other than this.  As far as I know the mirrors with out the bow tie are not being manufactured.

Thanks

rich69rs

  • Hero Member
  • *****
  • Posts: 1110
  • LF7/M35/Z22/Z87
    • View Profile
Re: Outside mirror
« Reply #1 on: February 19, 2007, 08:58:39 PM »
See the discussion at the following thread:

http://www.camaros.org/forum/index.php?topic=24.msg894#msg894
Richard Thomas
1969 RS

dab67

  • Member
  • ***
  • Posts: 460
  • 67 SS
    • View Profile
Re: Outside mirror
« Reply #2 on: February 20, 2007, 10:55:42 AM »
There are two phillips screws behind the glass that will when tightened, put pressure on the ball that pivots the mirror frame. Biggest problem is getting the glass out with breaking it.

Good Luck

Dab67

jeff68

  • Member
  • ***
  • Posts: 432
    • View Profile
Re: Outside mirror
« Reply #3 on: February 26, 2007, 05:40:24 PM »
I was able to remove the glass from my 68 outside mirror by:
1)  hold the mirror glass side up in a vise
2)  fill the mirror head with lacquer thinner
3)  let sit for 24 hours
4)  gently pry the glass out
 The lacquer thinner really softened the adhesive.
68 L30/M20 Convertible, Ash Gold
N10, F41, N34, Z21, ZJ9, Z87, D55, G80, P01, U17

Jerry@CHP

  • CRG Member
  • *****
  • Posts: 1512
    • View Profile
Re: Outside mirror
« Reply #4 on: February 26, 2007, 06:17:56 PM »
The Paragon repro mirrors are very nice......and tight and come with date codes per customer's request.  I think they run about $70.  Not a bad deal.

Jerry

dab67

  • Member
  • ***
  • Posts: 460
  • 67 SS
    • View Profile
Re: Outside mirror
« Reply #5 on: February 26, 2007, 08:16:25 PM »
Jeff:

Nice job and very creative to say the least!! Other than waiting 24 hours to allow the liquid to work, did you have any problem scleaning it out of the mirror case and then re-installing the mirror?

dab67


 

anything