Author Topic: Original ignition coils  (Read 22145 times)

RichSS2006

  • Member
  • ***
  • Posts: 47
    • View Profile
Re: Original ignition coils
« Reply #15 on: June 19, 2019, 02:12:08 PM »
My one owner Pace Car L48 is a 270BR. 04C built.
Rich
69 X22 L78 M21 10-10
69 Z11 L48 M20 50A

firstgenaddict

  • Hero Member
  • *****
  • Posts: 2882
  • caretaker of 1971 LT1's 11130 & 21783
    • View Profile
    • Groome Family Automobiles
Re: Original ignition coils
« Reply #16 on: March 20, 2021, 06:19:12 PM »
Was the 270 only coupled with the coil bracket which had a steeper angle to it?
The cowl induction air cleaner, the 67 L48 L30 Aircleaner were all larger in diameter and would not allow the regular coil to be positioned where it was with the "upright" bracket.
I was going through My brothers 73 Corvette and saw it also has a 270 coil and bracket which leans more than others.
James
Collectin' Camaro's since "Only Rednecks drove them"
Current caretaker of 1971 LT1's - 11130 and 21783 Check out the Black 69 RS/Z28 45k mile Survivor and the Lemans Blue 69 Z 10D frame off...
https://plus.google.com/photos/112392262205377424364/albums?banner=pwa

69Z28-RS

  • Hero Member
  • *****
  • Posts: 5778
  • owner since 4-Apr-1976
    • View Profile
Re: Original ignition coils
« Reply #17 on: March 20, 2021, 06:44:45 PM »
James,  That is what we've been told the difference is by JohnZ...  The '270' number represents the coil AND the leaning bracket!
09C 69Z28-RS, 72 B 720 cowl console rosewood tint
69 Corvette, '60 Corvette, '72 Corvette
90 ZR1 red/red #246, 90 ZR1 white/gray #2466
72 El Camino, '55-'56-'57 Nomads, '55-'57 B/A Sedan

KurtS

  • CRG Coordinator
  • *****
  • Posts: 5884
    • View Profile
Re: Original ignition coils
« Reply #18 on: March 21, 2021, 03:13:41 AM »
Delco had a baffling way of numbering the coil & bracket. The coil number is actually the assembly number. So even though a 270 coil and a 290 coil have different #'s, they might be the same internally!
Kurt S
CRG

x55cam

  • Member
  • ***
  • Posts: 33
    • View Profile
Re: Original ignition coils
« Reply #19 on: May 04, 2021, 03:07:08 PM »
I was scanning thru the MacNeish book expecting to see details about coils - absolutely nothing. This indicates to me that if Jerry didn't list it, it wasn't unique to the 67-68 Z28's. Resistance wires were a common usage, but  the 69 Z used a different coil. According to a Camaro Fact book I have the coil was painted gloss black.
Be careful about reading  health books. Some fine day you'll die of a misprint. - Markus Herz

KurtS

  • CRG Coordinator
  • *****
  • Posts: 5884
    • View Profile
Re: Original ignition coils
« Reply #20 on: August 09, 2021, 05:55:40 PM »
The docs are clear, one coil for 68 V8. But Danny's car is a 298. Several others are 293.
I don't have a single Chassis Broadcast sheet for a 68 Z which would tell us something.
Wonder what's on Chick's and Steve's cars.
Finally got a Chassis sheet for a 68 Z - same as 69 Z, so probably a 298.  (Most of the time if they reused a code, it was the same part.)

Made the info part of the site: http://www.camaros.org/engine.shtml#coils
« Last Edit: August 09, 2021, 09:07:44 PM by KurtS »
Kurt S
CRG

x55cam

  • Member
  • ***
  • Posts: 33
    • View Profile
Re: Original ignition coils
« Reply #21 on: November 25, 2021, 04:54:51 PM »
had to check my coil from an original 327 car and to my amazement it was the original - 293.  I think Jerry's book needs to be corrected to show that Z's came with the 298.
« Last Edit: November 25, 2021, 05:55:10 PM by x55cam »
Be careful about reading  health books. Some fine day you'll die of a misprint. - Markus Herz

x55cam

  • Member
  • ***
  • Posts: 33
    • View Profile
Re: Original ignition coils
« Reply #22 on: November 26, 2021, 02:21:00 PM »
My apologies to the OP - the 293 for 68 seems to be the one used on Z's -checked on some restorations noting this  ;)
Be careful about reading  health books. Some fine day you'll die of a misprint. - Markus Herz

KurtS

  • CRG Coordinator
  • *****
  • Posts: 5884
    • View Profile
Re: Original ignition coils
« Reply #23 on: December 08, 2021, 08:39:41 PM »
My apologies to the OP - the 293 for 68 seems to be the one used on Z's -checked on some restorations noting this  ;)
I went through that above - it appears to be 298 for 68 Z's, with docs to back that up.
Kurt S
CRG

x55cam

  • Member
  • ***
  • Posts: 33
    • View Profile
Re: Original ignition coils
« Reply #24 on: December 24, 2021, 04:28:34 AM »
My apologies to the OP - the 293 for 68 seems to be the one used on Z's -checked on some restorations noting this  ;)
I went through that above - it appears to be 298 for 68 Z's, with docs to back that up.

Check out this thread on the owner of an original 68 Z - the coil on it is a 293 - the MacNeish book usually is very spot on for any differences between
the 68Z's and the other models and he did not state anything unique about the Z coil. That would indicate that the 327 / 302's used the same ones.

https://www.camaros.net/threads/time-for-another-68-z-28-to-be-restored.182584/page-25#post-1695123
Be careful about reading  health books. Some fine day you'll die of a misprint. - Markus Herz

GMAD_Van Nuys

  • Member
  • ***
  • Posts: 300
    • View Profile
Re: Original ignition coils
« Reply #25 on: December 24, 2021, 04:44:40 PM »
According to this article, the ignition coil used on the 1968 Z28 with the transistorized ignition was different:

http://www.camaros.org/trans_ign.shtml

firstgenaddict

  • Hero Member
  • *****
  • Posts: 2882
  • caretaker of 1971 LT1's 11130 & 21783
    • View Profile
    • Groome Family Automobiles
Re: Original ignition coils
« Reply #26 on: December 24, 2021, 08:57:39 PM »
According to this article, the ignition coil used on the 1968 Z28 with the transistorized ignition was different:

http://www.camaros.org/trans_ign.shtml
Transistor coils have different resistance values across both windings.
If you haven't priced a real transistor ignition coil... NOS ones are in the $500 range IF you can find one. Used are sometimes as high. 
I didn't know the TI for a 68 was available except through the parts department on Camaros. It was available as optional in 68 vettes on engines L79 L36 L68 or required on the L71 L88.
James
Collectin' Camaro's since "Only Rednecks drove them"
Current caretaker of 1971 LT1's - 11130 and 21783 Check out the Black 69 RS/Z28 45k mile Survivor and the Lemans Blue 69 Z 10D frame off...
https://plus.google.com/photos/112392262205377424364/albums?banner=pwa

GMAD_Van Nuys

  • Member
  • ***
  • Posts: 300
    • View Profile
Re: Original ignition coils
« Reply #27 on: December 24, 2021, 09:12:59 PM »
I believe that my friend's 1968 Z28 had its original distributor and after he rebuilt the engine for racing, I remember him power-shifting the motor into second gear and the Sun tach was reading 8700 rpm as I pulled my legs onto the passenger seat as the car didn't have a scatter shield.  I've asked previously about the performance of the 1968 Z28 transistorized distributor, but have never gotten a reply.

firstgenaddict

  • Hero Member
  • *****
  • Posts: 2882
  • caretaker of 1971 LT1's 11130 & 21783
    • View Profile
    • Groome Family Automobiles
Re: Original ignition coils
« Reply #28 on: December 24, 2021, 11:25:45 PM »
The TI system was good to 10k or better without breaking up.
The 207 TI coil was the over the counter coil available through out the time Chevrolet offered them through the parts dept. The earlier 207's are embossed the later ones are ink stamped. it's first application is mid 65 -67 small block vette applications 350 365 375hp

The Corvette TI coils installed assembly line other than the 207, were, like the ZL1 coil not available as a service part.
James
Collectin' Camaro's since "Only Rednecks drove them"
Current caretaker of 1971 LT1's - 11130 and 21783 Check out the Black 69 RS/Z28 45k mile Survivor and the Lemans Blue 69 Z 10D frame off...
https://plus.google.com/photos/112392262205377424364/albums?banner=pwa

 

anything