« previous next »
Pages: 1 ... 3 4 [5]  All

Author Topic: 1968 RS Forensics  (Read 5698 times)

SMS

  • Member
  • ***
  • Posts: 54
    • View Profile
Re: 1968 RS Forensics
« Reply #60 on: February 15, 2018, 09:37:16 PM »
A01 Soft Ray tinted glass.



Door sheet metal in excellent condition.



Door panels appear to have never been off.  No adjustment marks on or around any of the bolts, fabric sleeve inside door, felt paper still has the plastic dust shield at the handle opening and all in great shape.  No water damage to door panel or liner.  Planning now to restore these rather than replace.













Logged

SMS

  • Member
  • ***
  • Posts: 54
    • View Profile
Re: 1968 RS Forensics
« Reply #61 on: February 15, 2018, 09:46:12 PM »
Now all I need is Jim Rockford PI skills to find out who the student was in 1971 that had this parking pass at Rose Polytechnic Institute (now Rose Hullman) in Terre Haute, In.

Actually, I did find an old year book and have assembled a list of possible candidates as the YB listed hometowns and such and it was a very small student body back then.  Interesting...



Logged

x66 714

  • Hero Member
  • *****
  • Posts: 607
    • View Profile
Re: 1968 RS Forensics
« Reply #62 on: February 15, 2018, 10:25:30 PM »
I had Al Knoch do my door panels. They look great even though they never could match the color (Yellow). The red might be a different subject....Joe
Logged
See America's First, Chevrolet

1968 Z/28 Corvette Bronze. Black Hounds Tooth. 02E Los Angeles born 3/13/1968 pnt OO. Purchased March 1976
1969 SS396 Yellow/Yellow 08E Norwood born 8/28/1969 pnt 76E. Purchased April 1981

SMS

  • Member
  • ***
  • Posts: 54
    • View Profile
Re: 1968 RS Forensics
« Reply #63 on: March 14, 2018, 02:57:15 PM »
Finally a step in the forward direction.  Doors removed, DA sanded, media blasted, hammer and dollied, primed.  Orig. sheetmetal.    Subframe coming off next and body going on a dolly and inside.













Logged

SMS

  • Member
  • ***
  • Posts: 54
    • View Profile
Re: 1968 RS Forensics
« Reply #64 on: March 14, 2018, 03:00:11 PM »
Buying parts as I come across them in no particular order.  Focusing first on Z specific items like cast iron PS pulley, etc...  Decided to go the reproduction headers route rather than manifolds and smog equipment.



Logged

SMS

  • Member
  • ***
  • Posts: 54
    • View Profile
Re: 1968 RS Forensics
« Reply #65 on: March 14, 2018, 03:09:00 PM »
B27 8 and B28 8 291's







Logged

169INDY

  • Member
  • ***
  • Posts: 445
    • View Profile
Re: 1968 RS Forensics
« Reply #66 on: March 15, 2018, 03:06:11 AM »
Tell me more about the headers?
Vendor, lead time, est market cost, fit, finish, material, etc?
You seem to making great progress.
JIM
Logged
Jim
68 SS/RS L35 Th-400 LOS
69 Pace Car L48 Th-350 LOS
68 Z28 M21 LOS

SMS

  • Member
  • ***
  • Posts: 54
    • View Profile
Re: 1968 RS Forensics
« Reply #67 on: March 17, 2018, 04:45:05 PM »
Quote from: 169INDY on March 15, 2018, 03:06:11 AM
Tell me more about the headers?
Vendor, lead time, est market cost, fit, finish, material, etc?
You seem to making great progress.
JIM

Jim,
I bought them new from Brett Radnoff, T/A Performance Restorations in California.

He is not the builder. If you do a search here on reproduction headers there is some discussion on them and Jerry M mentions the guy who builds them.

There are a bit like art.  I will hate to make them black and install them as they look so good on the bench. :)
Very solid and hefty. Welds and bends are very nice. Supposedly fab ed off the correct jigs.

Logged

JKZ27

  • Hero Member
  • *****
  • Posts: 513
    • View Profile
Re: 1968 RS Forensics
« Reply #68 on: March 18, 2018, 12:16:38 AM »
Yeah, same ones Chick has. Gorgeous but expensive!
Logged
John
69 RS/SS Cortez Silver, L48 MC1
68 RS Ash/Ivy Gold 327EFI M20
Pages: 1 ... 3 4 [5]  All
« previous next »