Author Topic: 1969 Z/28 worth looking at  (Read 11653 times)

BULLITT65

  • Hero Member
  • *****
  • Posts: 4480
    • View Profile
1969 Z/28 worth looking at
« on: April 30, 2016, 05:28:19 PM »
Hey guys, I ran across this ad on eBay. Looks to be an original Glacier blue 69 Z, and it appears to have the original drive train.
it is a 06A car, and has the U16 tach and center fuel gage (no console).
I don't see many numbers matching project Z cars these days, so I thought I would post a link in case someone is looking.

Maybe Kurt can verify the DZ block stamp looks ok. He also posts a pic of the Vin stamp, which is nice for a eBay auction to show.


http://www.ebay.com/itm/152072013000?forcerRptr=true&item=152072013000&viewitem=
1969 garnet red Z/28 46k mile unrestored X77
-Looking for 3192477 (front) spiral shocks 3192851 (rear)
-Looking for an original LOF soft ray windshield
-Looking for original Delco side post negative battery cable part # 6297651AV

BillOhio

  • Hero Member
  • *****
  • Posts: 1179
    • View Profile
    • photobucket
Re: 1969 Z/28 worth looking at
« Reply #1 on: April 30, 2016, 07:05:37 PM »
ohio car now in California. opposite of what I want!!
1969 Z28, Burgandy, numbers matching, 12,900 miles
1968 RS 327 4 speed
1970 Z28 M22 4:10 bought from original owner
1961 Chrysler 300G convertible

restore-z28

  • Member
  • ***
  • Posts: 288
    • View Profile
Re: 1969 Z/28 worth looking at
« Reply #2 on: April 30, 2016, 08:10:40 PM »
Nice car and looks to be pretty complete, not sure about the starting bid...seems a little high for a car that needs a resto, he just re-listed this Z, started at $38K and dropped to $37,500 now $35K first bid. I really like this one, don't see too many Glacier Blue Z's around. All the stampings and TT look legit.
« Last Edit: April 30, 2016, 09:48:51 PM by restore-z28 »
Sonny
1969 Z28 Camaro, sold :-(
1970 Z28 Camaro
www.camaros.ca

69Z28-RS

  • Hero Member
  • *****
  • Posts: 5781
  • owner since 4-Apr-1976
    • View Profile
Re: 1969 Z/28 worth looking at
« Reply #3 on: April 30, 2016, 10:09:09 PM »
stampings look very good to me also; I'd put $$ on the DZ stamping being original factory stamp.  This might be a good car for someone wanting an original Z28 that didn't mind doing, and had capability of doing quality metal work.  The 'bad issues' visible in the photos (to me)were the heavy rust pits on the heavy metal underneath the car (subframe, etc) and even on the firewall under/around the cowl tag.   Could be restored to be a very nice car I suspect by the *right person*... like maybe a Sauron? :)

Gary / 69z28-RS
09C 69Z28-RS, 72 B 720 cowl console rosewood tint
69 Corvette, '60 Corvette, '72 Corvette
90 ZR1 red/red #246, 90 ZR1 white/gray #2466
72 El Camino, '55-'56-'57 Nomads, '55-'57 B/A Sedan

1968RSZ28

  • Hero Member
  • *****
  • Posts: 6188
    • View Profile
Re: 1969 Z/28 worth looking at
« Reply #4 on: May 01, 2016, 01:48:54 AM »
VIN: 124379N658023

Paul

68 Ragtop

  • Member
  • ***
  • Posts: 474
    • View Profile
Re: 1969 Z/28 worth looking at
« Reply #5 on: May 01, 2016, 03:34:19 AM »
Wow, it's refreshing to see an honest car accurately described on ebay.

janobyte

  • Hero Member
  • *****
  • Posts: 1531
  • Before it was called Day 2 !
    • View Profile
Re: 1969 Z/28 worth looking at
« Reply #6 on: May 01, 2016, 11:20:30 AM »
ohio car now in California. opposite of what I want!!

LOL!
68 Z/28  born with: 302, drive line, etc..

KurtS

  • CRG Coordinator
  • *****
  • Posts: 5971
    • View Profile
Re: 1969 Z/28 worth looking at
« Reply #7 on: May 02, 2016, 12:59:39 AM »
Looks good. But it sounds rusty. Duct tape on the rockers is not a good sign...
Kurt S
CRG

69z28302

  • Member
  • ***
  • Posts: 388
    • View Profile
Re: 1969 Z/28 worth looking at
« Reply #8 on: May 02, 2016, 01:14:31 AM »
I thought a late car like that came with a U17 as part of the Z/28 option?


KurtS

  • CRG Coordinator
  • *****
  • Posts: 5971
    • View Profile
Re: 1969 Z/28 worth looking at
« Reply #9 on: May 02, 2016, 01:19:06 AM »
Nope. Tach was required, not gauges.
Kurt S
CRG

bcmiller

  • CRG Member
  • *****
  • Posts: 4101
    • View Profile
Re: 1969 Z/28 worth looking at
« Reply #10 on: May 02, 2016, 02:03:13 AM »
I would want to check it over in person first.  Rust might be more extensive than shown.  I wouldn't be scared off at this point, but would think the price is still too high.
Bryon / 1968 Camaro SS 396 coupe - now old school 468 big block
1967 Camaro RS/SS 396 coupe L35/M40 - 4 generation family project
Looking for 68 Camaro with body # NOR 181016

1968RSZ28

  • Hero Member
  • *****
  • Posts: 6188
    • View Profile
Re: 1969 Z/28 worth looking at
« Reply #11 on: May 03, 2016, 10:30:51 PM »
5-3-16: Minimum bid price lowered to $33,995.00

Paul

restore-z28

  • Member
  • ***
  • Posts: 288
    • View Profile
Re: 1969 Z/28 worth looking at
« Reply #12 on: May 05, 2016, 03:43:49 AM »
I would want to check it over in person first.  Rust might be more extensive than shown. 

Bryon you are correct about the rusty areas, I spoke to the seller (nice guy and seemed honest) and he sent me more photos of the underside and dash area, this car will be a full restoration project. Not sure someone can just buy the car, install the original 302 and be done...no doubt there will be metal repair and likely panel replacement including rear frame rail work. IMO this car is the real deal and a rare color combo, the buyer would have to decide does that out way the work required to bring this one back to life.  The current engine in the car is a 383 stroker block, seller does not know why the engine was changed out nor does he know for sure the original engine is still good...said no rods were hanging out so I guess that might be a good sign....
Sonny
1969 Z28 Camaro, sold :-(
1970 Z28 Camaro
www.camaros.ca

1968RSZ28

  • Hero Member
  • *****
  • Posts: 6188
    • View Profile
Re: 1969 Z/28 worth looking at
« Reply #13 on: May 05, 2016, 04:11:43 AM »
The current engine in the car is a 383 stroker block, seller does not know why the engine was changed out nor does he know for sure the original engine is still good...said no rods were hanging out so I guess that might be a good sign....

Since the original engine is out of the car, this should be easy to check by pulling the oil pan.

Paul

jdv69z

  • Hero Member
  • *****
  • Posts: 1275
  • 69 RS Z/28 52E
    • View Profile
Re: 1969 Z/28 worth looking at
« Reply #14 on: May 05, 2016, 01:03:27 PM »
Those are definitely 302 pistons sticking out of that block in the pic. Sounds like a big project, but if someone is interested in an original resto, and wants to have the all the original drive train, there might not be too many like this around to choose from. Looks like the original master cylinder to me as well. If it's about making a buck, then probably not the right project at the current price.
Jimmy V.

 

anything