Author Topic: 1967 Tranmission cross member orientation  (Read 2904 times)

67rs327

  • Member
  • ***
  • Posts: 73
    • View Profile
1967 Tranmission cross member orientation
« on: August 02, 2015, 02:26:14 AM »
So in my haste to remove the transmission cross member from my '67 (4 speed) - I failed to notice which side is forward (or aft?)
There's a single hole in the center section near the 2 main mounting holes - and also 2 smaller ones on one  side and a single directly across from those on the other side. Curious what these are for and what direction should the cross member be in for reinstallation? Thanks.
1967rs L30/M20 Bolero Red - LOS 11A.
Chris - New Hampshire.

1968 Z28

  • Hero Member
  • *****
  • Posts: 562
    • View Profile
Re: 1967 Tranmission cross member orientation
« Reply #1 on: August 02, 2015, 02:49:00 AM »
The three small holes are for the shifter mounting bracket......therefore the crossmember would mount with them on the driver side.
Jerry G.

Z28-1968-07C-Norwood
Ermine White, Red Std. Interior
2nd. Owner, 38,000 miles

67rs327

  • Member
  • ***
  • Posts: 73
    • View Profile
Re: 1967 Tranmission cross member orientation
« Reply #2 on: August 02, 2015, 02:55:30 AM »
Thanks man. Knew someone had a quick answer to that.
1967rs L30/M20 Bolero Red - LOS 11A.
Chris - New Hampshire.