Author Topic: Just became a member  (Read 12737 times)

69 Zee

  • Hero Member
  • *****
  • Posts: 595
    • View Profile
Re: Just became a member
« Reply #15 on: March 26, 2015, 01:51:09 PM »
Hey Rob, welcome to CRG.  You've come to the right spot.  Tons of knowledge here and you'll soon see just how special these 1st gens really are.  As far as building a 302,  Yeah it'll scream but why not just rebuild the 402 (essentially a 396) big block that you already have into an even more screamer ?   Regardless.. have fun and enjoy !   :)

If you've never heard a 302 at above 8 grand (I've had them that would turn over 10,000), then you haven't heard a V8 'scream'!~  :)       A 396/402 is 'groaning' at 6500.. and I can't imagine one screaming... :)   

Of course, if stump-pulling torque is your thing, then the 396/402 will do it for you!

Gary your absolutely correct.. Guess I should of worded it different.  A 302 is definitely the screamer by far!  I was thinking more in the line of HP and a much more powerful engine in a mild state of tune and could even get a little mpg.
Darrell
'69 Camaro Z/28: 03B NOR X77 Dusk Blue, white top, all orig, Under construction
'69 Firebird all original 350 all power w/ac
'70 Plymouth Superbird: One owner, Limelight green, 45K miles, all original U code

69Z28-RS

  • Hero Member
  • *****
  • Posts: 5778
  • owner since 4-Apr-1976
    • View Profile
Re: Just became a member
« Reply #16 on: March 26, 2015, 02:08:49 PM »
Hey Rob, welcome to CRG.  You've come to the right spot.  Tons of knowledge here and you'll soon see just how special these 1st gens really are.  As far as building a 302,  Yeah it'll scream but why not just rebuild the 402 (essentially a 396) big block that you already have into an even more screamer ?   Regardless.. have fun and enjoy !   :)

If you've never heard a 302 at above 8 grand (I've had them that would turn over 10,000), then you haven't heard a V8 'scream'!~  :)       A 396/402 is 'groaning' at 6500.. and I can't imagine one screaming... :)    

Of course, if stump-pulling torque is your thing, then the 396/402 will do it for you!

Gary your absolutely correct.. Guess I should of worded it different.  A 302 is definitely the screamer by far!  I was thinking more in the line of HP and a much more powerful engine in a mild state of tune and could even get a little mpg.

:).. I knew what you meant, Darrell..  but one of my roles here is to defend the reputations of the 'little guy'.. (302).. :)
Or..  as once proclaimed by one or more car mags... 'The Mouse that ROARS'.. :)
09C 69Z28-RS, 72 B 720 cowl console rosewood tint
69 Corvette, '60 Corvette, '72 Corvette
90 ZR1 red/red #246, 90 ZR1 white/gray #2466
72 El Camino, '55-'56-'57 Nomads, '55-'57 B/A Sedan

janobyte

  • Hero Member
  • *****
  • Posts: 1531
  • Before it was called Day 2 !
    • View Profile
Re: Just became a member
« Reply #17 on: March 26, 2015, 03:38:48 PM »
I have a 71 low compression 402 (date matched heads/block) I cant give away up here. Maybe a regional thing , but  pretty unpopular engine on the North Coast ? Although a 396... 2 camps tend to be your high r  small blocks , or 454+ cubes, "427"s tend to be stroked 400's up to 454's(with some issues)

302's have a unique, wonderful sound throughout the RPM range ,they just do. But....they are not real traffic friendly, they were purpose built ( Kurt S.)

My 400 (sbc) backed by a turbo 350 and 4.88's pulled the wheels ,ran consistent 12.5's (fast for a street car in the day)and behaved well in traffic. Did I mention shift point was 7800? Never broke with that set up. Although looking back, geared to steep, was a better 1/8th mile car.

Yes the 302 is going back in the Z, ready on the stand.

Dollar for dollar, cant go wrong with a crate 383. but...

IF it is a Z ,it needs a 302 (smiles) They define each other.
68 Z/28  born with: 302, drive line, etc..

69Z28-RS

  • Hero Member
  • *****
  • Posts: 5778
  • owner since 4-Apr-1976
    • View Profile
Re: Just became a member
« Reply #18 on: March 26, 2015, 04:00:05 PM »
I have a 71 low compression 402 (date matched heads/block) I cant give away up here. Maybe a regional thing , but  pretty unpopular engine on the North Coast ? Although a 396... 2 camps tend to be your high r  small blocks , or 454+ cubes, "427"s tend to be stroked 400's up to 454's(with some issues)

302's have a unique, wonderful sound throughout the RPM range ,they just do. But....they are not real traffic friendly, they were purpose built ( Kurt S.)

My 400 (sbc) backed by a turbo 350 and 4.88's pulled the wheels ,ran consistent 12.5's (fast for a street car in the day)and behaved well in traffic. Did I mention shift point was 7800? Never broke with that set up. Although looking back, geared to steep, was a better 1/8th mile car.

Yes the 302 is going back in the Z, ready on the stand.

Dollar for dollar, cant go wrong with a crate 383. but...

IF it is a Z ,it needs a 302 (smiles) They define each other.

I agree with all your points, Jano..  except ONE!   you CAN give that '71 402 away..  to me..  and I'll come pick it up!  :)   I need a 'torque motor' for the '72 El Camino I'm building.. :)
09C 69Z28-RS, 72 B 720 cowl console rosewood tint
69 Corvette, '60 Corvette, '72 Corvette
90 ZR1 red/red #246, 90 ZR1 white/gray #2466
72 El Camino, '55-'56-'57 Nomads, '55-'57 B/A Sedan

cook_dw

  • Hero Member
  • *****
  • Posts: 3981
    • View Profile
Re: Just became a member
« Reply #19 on: March 26, 2015, 04:36:39 PM »
I wouldn't put a 302 in anything by choice. Realize several of the TA teams reputedly cheated and ran stroked 302's (aka LT1 350's).
The *only* reason Chevrolet made the 302 is because of TA rules. When the rules allowed it, Chevy went to the LT1.
A little balancing and you'll have more power and same rpm....









BBFTW       

(Big Blocks For The Win)

KurtS

  • CRG Coordinator
  • *****
  • Posts: 5884
    • View Profile
Re: Just became a member
« Reply #20 on: March 26, 2015, 04:48:35 PM »
Everyone says you don't want 3.31 or 3.55 gears in a Z - too hard to launch. You never hear that with a LT1.
It performs about the same as the 302, but with more torque on the low-end.
In 1970, the Trans-Am series allowed for destroking motors. So Chevrolet went with the LT1 in production and TA teams destroked it back to a 302 for the track.

If you want originality, it needs a 302. If you want a driver and more torque across the spectrum, then a stroked 302. Y'all remember the Z29 feature car?

Obviously, this is heresy to some. :)
Kurt S
CRG

L78 steve

  • Hero Member
  • *****
  • Posts: 797
    • View Profile
Re: Just became a member
« Reply #21 on: March 26, 2015, 04:50:32 PM »
I'm not a big fan of the 302 either. When I assemble my DZ block it will have a 3.48 stroke steel crank in it.
69 Z/28 Dover White. SOLD
67 SS/RS Mt. Green 1W,2LGSR,3SL,4K,5BY,07C. SOLD
70 Nova L78 Blk. Cherry,Sandalwood,M21,02B

janobyte

  • Hero Member
  • *****
  • Posts: 1531
  • Before it was called Day 2 !
    • View Profile
Re: Just became a member
« Reply #22 on: March 26, 2015, 05:14:07 PM »
No heresy :D

" a rose by any other name is still a rose"  Big block, small block ,name the cube. As long as it's a bowtie. Dollar for dollar still the best mule you can build for the job.

Tails from the strip: Ran the Anglia at Pinks when it was at Norwalk a few years ago , guy in a early 426 Dodge told me great car ,could have used a "Hemi"  in a sarcastic tone(very pretty car the Dodge)

Well ,he got me outa the hole(no 4.10's in it at the time) ,caught him at the 1/8th , we ran hard to the beams but pulled him by a fender . That Dart headed ,Oliver rod ,JE 14.75:1 splayed mained SBC was stroking ! ( no throttle stop) Very sweet sound. Ran into him in NY(Dad did) runnin the mouth a bit. 1/8 mile ,steeper gear in the rear ,car was hitting hard!
Declined a little fun run$$

( Gotta imagine "Shut Down" playing)


Gary---engines apart ,I'll shoot you some pics this weekend and a PM, just let me know what's fair.
68 Z/28  born with: 302, drive line, etc..

robsom74

  • Newbie
  • *
  • Posts: 6
    • View Profile
Re: Just became a member
« Reply #23 on: March 26, 2015, 06:45:19 PM »
Thanks guys. I agree about a big block and the power. I built a 60 over 396 for my 72 and backed it up with  Super T10. I massaged a good set of square port heads for it and threw in a good solid cam. It was fast and fun...but all in all it wasn't a 68 Camaro...lol. I could build the 402 in the 68...but since its a complete 71 LS-3, I want to see if I can track down the original Chevelle it came out of or sell it to someone doing a complete resto on a 71 SS. Its a CLA coded 71 and the partial vin has a K in it designating the Kansas City plant. And as far as the 302.....I'm gonna build a 10 grand screamer and back it up with a 5 speed...probably a Richmond....unless I can find one hell of a deal on a nice rebuilt M22. never having second thoughts about joining!!

69Z28-RS

  • Hero Member
  • *****
  • Posts: 5778
  • owner since 4-Apr-1976
    • View Profile
Re: Just became a member
« Reply #24 on: March 26, 2015, 06:48:52 PM »
Everyone says you don't want 3.31 or 3.55 gears in a Z - too hard to launch. You never hear that with a LT1.
It performs about the same as the 302, but with more torque on the low-end.
In 1970, the Trans-Am series allowed for destroking motors. So Chevrolet went with the LT1 in production and TA teams destroked it back to a 302 for the track.

If you want originality, it needs a 302. If you want a driver and more torque across the spectrum, then a stroked 302. Y'all remember the Z29 feature car?

Obviously, this is heresy to some. :)

and I have no argument with Kurt's comments either, except for this one.... that's a big word.. ''about''...  :)

"It performs about the same as the 302,"...

I prefer a 350 for everyday driving.. I've even *considered* installing an LT1 crank/pistons in my 302 block...  but.. even the 1970 LT1 engine didn't rev as quickly or as high as a well built 302...  If I'd put a 350 crank in the 302..    the end result would be .. 'The THRILL IS GONE!"...  :)
09C 69Z28-RS, 72 B 720 cowl console rosewood tint
69 Corvette, '60 Corvette, '72 Corvette
90 ZR1 red/red #246, 90 ZR1 white/gray #2466
72 El Camino, '55-'56-'57 Nomads, '55-'57 B/A Sedan

jdv69z

  • Hero Member
  • *****
  • Posts: 1275
  • 69 RS Z/28 52E
    • View Profile
Re: Just became a member
« Reply #25 on: March 26, 2015, 07:34:49 PM »
All I ever get when I go to the parts store and tell 'em it's a 302in a Camaro is: "it's got a Ford motor in it?"
Jimmy V.

1968RSZ28

  • Hero Member
  • *****
  • Posts: 6188
    • View Profile
Re: Just became a member
« Reply #26 on: March 26, 2015, 07:53:14 PM »
All I ever get when I go to the parts store and tell 'em it's a 302in a Camaro is: "it's got a Ford motor in it?"

Time to find a new parts store!  :)

Paul

MyRed67

  • Hero Member
  • *****
  • Posts: 805
  • SZZLN 67
    • View Profile
Re: Just became a member
« Reply #27 on: March 28, 2015, 08:25:24 AM »
Welcome on board Rob.  As you've probably figured out by now, you will get plenty of opinions.  So here is another.  I have had good luck with 327's, I had one that had a "full-race" solid lifter Crane cam "back in the day" that I'm sure would hit 10K(it would over wind the Tach.)  The engine I have in my '67 is the original 327 now pushing 400 hp. and very streetable.  It is dressed up to look just like a 302, 'cause I consider my car a Z tribute. 
1967 Camaro  LOS  11A
Original Engine   Z - Tribute
Mike C.    NW - Illinois

VINCE Z28

  • Hero Member
  • *****
  • Posts: 760
    • View Profile
Re: Just became a member
« Reply #28 on: March 28, 2015, 01:55:16 PM »
One thing I would consider before having a motor built is what type of driving will I be doing, what is the compression raito I can get away with on pump gas with out mixing fuel.
" He who knows naught, knows not that he knows naught"  It's not you...  It's just the way my brain is wired.

dannystarr

  • Hero Member
  • *****
  • Posts: 1745
    • View Profile
Re: Just became a member
« Reply #29 on: March 28, 2015, 07:27:00 PM »
I took my last 302 to 7,200 more than once. Nothing like it when it feels like the dash is going fall in your lap! However my current 302 I have put 2,100 miles on it and it has not seen 4,200. I can't take the chance, as it was sitting for about 26 or 28 years. But it still sounds pretty darn good... D

 

anything