Author Topic: Window Guide Plates  (Read 7536 times)

68rs327conv

  • Member
  • ***
  • Posts: 111
    • View Profile
    • The build
Window Guide Plates
« on: January 07, 2015, 02:24:14 AM »
Need help, I am about to reinstall my door glass that my body man disassembled without marking the parts.  I have the Fisher Service Manual and cannot see where the 2 guide plates are attached.  These are the rectangular plates with 2 holes that are covered with a nylon type fabric. There are two per door.
See pic below

Thanks in advance

Also I might need some help with which bolts go to which parts, such as the window regulator etc slowly figuring them out.

Mike
Mike
68 RS Conv 327/210hp, Powerglide Factory AC

KevinW

  • Hero Member
  • *****
  • Posts: 857
    • View Profile
Re: Window Guide Plates
« Reply #1 on: January 07, 2015, 12:15:39 PM »
I used water proofed denim material to reface mine. The are attached to a metal edge behind the fuzzy strip (when looking from inside the car), by 2 small flat head phillips sheet metal screws. There should be one near exterior door handle and one forward.  There will be two plastic bumps attached to window glass that ride against these, measure where those are to get the location on the door.

68rs327conv

  • Member
  • ***
  • Posts: 111
    • View Profile
    • The build
Re: Window Guide Plates
« Reply #2 on: January 08, 2015, 01:02:50 AM »
Thanks Kevin, much appreciated now I understand
Mike
68 RS Conv 327/210hp, Powerglide Factory AC

jl8dale

  • Member
  • ***
  • Posts: 146
    • View Profile
Re: Window Guide Plates
« Reply #3 on: January 08, 2015, 04:20:59 PM »
BTW, I sell a great replacement fabric for these window guides.

Here is my Ebay link.

http://www.ebay.com/itm/181622426257?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649

1969 Z/28 Daytona Yellow/Yellow Houndstooth, Tilt, Fold Down Seat, - POP

68rs327conv

  • Member
  • ***
  • Posts: 111
    • View Profile
    • The build
Re: Window Guide Plates
« Reply #4 on: January 09, 2015, 12:49:29 AM »
Much appreciated, you just saved me from cutting up a backpack.

Mike
Mike
68 RS Conv 327/210hp, Powerglide Factory AC

jl8dale

  • Member
  • ***
  • Posts: 146
    • View Profile
Re: Window Guide Plates
« Reply #5 on: January 09, 2015, 03:58:59 AM »
Thanks Mike, I will get them in the mail tomorrow.
1969 Z/28 Daytona Yellow/Yellow Houndstooth, Tilt, Fold Down Seat, - POP

JohnZ

  • CRG Member
  • *****
  • Posts: 4365
    • View Profile
Re: Window Guide Plates
« Reply #6 on: January 09, 2015, 04:38:17 PM »
In the plant, those were called "boxing gloves".  :)
'69 Z/28
Fathom Green
CRG

m22mike

  • Member
  • ***
  • Posts: 286
    • View Profile
Re: Window Guide Plates
« Reply #7 on: January 09, 2015, 08:52:02 PM »
FYI
Another good substitute for the black rub material for the front window guides that I have used often is black velcro ( the loop side that is thicker) 2 " works good.

Mike
X66 L78 M22 4.10 Deluxe Threads, PNT 10/10, Red Hockey stripe

169INDY

  • Hero Member
  • *****
  • Posts: 1788
    • View Profile
Re: Window Guide Plates
« Reply #8 on: January 11, 2015, 05:11:09 PM »
FYI
Another good substitute for the black rub material for the front window guides that I have used often is black velcro ( the loop side that is thicker) 2 " works good.

Mike

The material looks very similar to "ballistic nylon fabric". Tough, but slick.
We use it extensively in Submarine repair work at the Public Naval Shipyards.

I really like the Velcro (Loop)  idea

Jim
Jim
68 SS/RS L35 Th-400 LOS
69 Pace Car L48 Th-350 LOS
68 Z28 M21 LOS