Author Topic: 1969 Front Spoiler to Lower Valance Bolts  (Read 3285 times)

Edgemontvillage

  • Member
  • ***
  • Posts: 157
    • View Profile
1969 Front Spoiler to Lower Valance Bolts
« on: June 01, 2014, 11:59:16 PM »
The 1969 AIM specifies the spoiler-to-lower valance bolts as #9417075 #10-24 x 3/4" with a captured washer and #10-24 nut with captured washer #3759924. Do these bolts look like originals?
 






Lloyd
1969 RS Z/28 (Brooklyn Project)

enio45

  • Member
  • ***
  • Posts: 98
    • View Profile
Re: 1969 Front Spoiler to Lower Valance Bolts
« Reply #1 on: June 02, 2014, 01:08:46 AM »
Looks correct to me
Eddie  Montini
69Z

Edgemontvillage

  • Member
  • ***
  • Posts: 157
    • View Profile
Re: 1969 Front Spoiler to Lower Valance Bolts
« Reply #2 on: June 02, 2014, 01:11:27 AM »
Looks correct to me

Not too short Eddie? 5/8" vs 3/4" in the AIM?
Lloyd
1969 RS Z/28 (Brooklyn Project)

enio45

  • Member
  • ***
  • Posts: 98
    • View Profile
Re: 1969 Front Spoiler to Lower Valance Bolts
« Reply #3 on: June 02, 2014, 01:13:10 AM »
let me check mine to be sure
Eddie  Montini
69Z

69Z28-RS

  • Hero Member
  • *****
  • Posts: 2987
  • owner since 4-Apr-1976
    • View Profile
Re: 1969 Front Spoiler to Lower Valance Bolts
« Reply #4 on: June 02, 2014, 02:12:09 AM »
AMK has the nuts, pg 51....  a fairly shallow nut...

10-24    3/8 AF       .45 OD     .19 OAH
KNX,    3759924


..you probably knew this already.. but they don't show the pn for the screw...   :)
Gary W / 09C 69Z28-RS, 72 B 720 cowl console rosewood tint
69 Corvette convertible, silver/black 350 hp,
60 Corvette white/red, 72 Corvette coupe, '70 Mach I 
90 ZR1 red/red #246, 90 ZR1 white/gray #2466
72 El Camino, '55-'56-'57 Nomads, '55-'57 B/A Sedan

firstgenaddict

  • Hero Member
  • *****
  • Posts: 1417
    • View Profile
    • Groome Family Automobiles
Re: 1969 Front Spoiler to Lower Valance Bolts
« Reply #5 on: June 02, 2014, 04:02:05 AM »
Have we been giving lengths as overall?
I sold MRO supplies for Bowman fastener company and we always gave measurements from the seat (bottom face) of the bolt.
I would say that is 1/2" long.
James
Collectin' Camaro's since "Only Rednecks drove them"
 
Check out the Black 69 RS/Z28 45k mile Survivor and the Lemans Blue 69 Z 10D frame off...
https://plus.google.com/photos/112392262205377424364/albums?banner=pwa

enio45

  • Member
  • ***
  • Posts: 98
    • View Profile
Re: 1969 Front Spoiler to Lower Valance Bolts
« Reply #6 on: June 02, 2014, 04:08:28 AM »
james, u are correct, that is the standard for all bolts....from the bottom of the head or at the seat level
Eddie  Montini
69Z

ZLP955

  • Hero Member
  • *****
  • Posts: 760
    • View Profile
Re: 1969 Front Spoiler to Lower Valance Bolts
« Reply #7 on: June 02, 2014, 09:23:18 AM »
Should be shank length, not overall including head.
Tim - 04A VN '69 z/28 69-69 715 ex-E/MP

Edgemontvillage

  • Member
  • ***
  • Posts: 157
    • View Profile
Re: 1969 Front Spoiler to Lower Valance Bolts
« Reply #8 on: June 02, 2014, 02:26:01 PM »
Have we been giving lengths as overall?
I sold MRO supplies for Bowman fastener company and we always gave measurements from the seat (bottom face) of the bolt.
I would say that is 1/2" long.


Yes, of course (momentary lapse) thanks James.  

Anyone with a photo of a set of original spoiler bolts/nuts?
Lloyd
1969 RS Z/28 (Brooklyn Project)

JohnZ

  • CRG Member
  • *****
  • Posts: 4268
    • View Profile
Re: 1969 Front Spoiler to Lower Valance Bolts
« Reply #9 on: June 02, 2014, 02:42:47 PM »
The 1969 AIM specifies the spoiler-to-lower valance bolts as #9417075 #10-24 x 3/4" with a captured washer and #10-24 nut with captured washer #3759924. Do these bolts look like originals?

Nope. Those bolts in the photos have integral washers (washer heads), and the originals had "captured" washers, which are free-spinning, to avoid tearing up the plastic spoiler when they torque up.
'69 Z/28
Fathom Green
CRG

Edgemontvillage

  • Member
  • ***
  • Posts: 157
    • View Profile
Re: 1969 Front Spoiler to Lower Valance Bolts
« Reply #10 on: June 02, 2014, 05:09:49 PM »
Do-over...

Do these bolts appear to be original and correct? Does the "E" head marking correspond to a known (mid-1969) Chevrolet fastener supplier?




Lloyd
1969 RS Z/28 (Brooklyn Project)

69Z28-RS

  • Hero Member
  • *****
  • Posts: 2987
  • owner since 4-Apr-1976
    • View Profile
Re: 1969 Front Spoiler to Lower Valance Bolts
« Reply #11 on: June 02, 2014, 05:57:13 PM »

AMK lists their 'G-4320' kit for the '69 Camaro Z28 front spoiler, and says:  CONI SEMS, HXWA SCREWS, NUTS, WA'S    28 pieces,  $8.00

Has anyone purchased this kit who can tell or show us exactly what was included?
Gary W / 09C 69Z28-RS, 72 B 720 cowl console rosewood tint
69 Corvette convertible, silver/black 350 hp,
60 Corvette white/red, 72 Corvette coupe, '70 Mach I 
90 ZR1 red/red #246, 90 ZR1 white/gray #2466
72 El Camino, '55-'56-'57 Nomads, '55-'57 B/A Sedan

enio45

  • Member
  • ***
  • Posts: 98
    • View Profile
Re: 1969 Front Spoiler to Lower Valance Bolts
« Reply #12 on: June 02, 2014, 06:31:46 PM »
LLoyd - took mine off the 69Z that we are restoring as we speak....and cannot find where I put them.  as soon as I can find them ill post a pic...this is 9D car of 69 we are restoring with orig spiler bolts and nuts
Eddie  Montini
69Z

Edgemontvillage

  • Member
  • ***
  • Posts: 157
    • View Profile
Re: 1969 Front Spoiler to Lower Valance Bolts
« Reply #13 on: June 02, 2014, 06:49:18 PM »
LLoyd - took mine off the 69Z that we are restoring as we speak....and cannot find where I put them.  as soon as I can find them ill post a pic...this is 9D car of 69 we are restoring with orig spiler bolts and nuts

LOL...oh oh...keep looking Eddie!
Lloyd
1969 RS Z/28 (Brooklyn Project)

68Zproject

  • Hero Member
  • *****
  • Posts: 1634
    • View Profile
Re: 1969 Front Spoiler to Lower Valance Bolts
« Reply #14 on: June 03, 2014, 02:58:25 AM »
Lloyd, those look like some bolts I've seen on my 68.  I just can't remember where.
68Z28