Author Topic: 1969, which pinion snubber  (Read 15400 times)

lynnbilodeau

  • Member
  • ***
  • Posts: 395
    • View Profile
1969, which pinion snubber
« on: March 08, 2013, 02:52:27 PM »
Posted this over at Camaros.net, then got to thinking this forum might be more appropriate.

For sure there were two different ones, & I just want to see if there was a reason, or if it was totally random. Not sure why there would be two different ones.

Type one is the push-in. It looks similar to the rubber snubbers mounted to the frame rails, but a little smaller to push in the slot on the floor over the pinion.

Second one is a bolt-on.  Round snubber mounted to a plate that bolts on to the floor with two fasteners.

So, which do you have on your 69? Also, what axle, what engine/trans, and what ratio in the rear, and which plant?

I'll start:


Round bolt in snubber
12 bolt
302
m20
unsure of original axle ratio
Norwood

69Z28-RS

  • Hero Member
  • *****
  • Posts: 5778
  • owner since 4-Apr-1976
    • View Profile
Re: 1969, which pinion snubber
« Reply #1 on: March 08, 2013, 04:10:25 PM »
You might want to include 'build date' in that data, Lynn..  in case it changed during the year?
09C 69Z28-RS, 72 B 720 cowl console rosewood tint
69 Corvette, '60 Corvette, '72 Corvette
90 ZR1 red/red #246, 90 ZR1 white/gray #2466
72 El Camino, '55-'56-'57 Nomads, '55-'57 B/A Sedan

lynnbilodeau

  • Member
  • ***
  • Posts: 395
    • View Profile
Re: 1969, which pinion snubber
« Reply #2 on: March 08, 2013, 04:44:27 PM »
Works for me.
Mine is 08A

tmodel66

  • Hero Member
  • *****
  • Posts: 1212
    • View Profile
Re: 1969, which pinion snubber
« Reply #3 on: March 09, 2013, 01:07:29 PM »
Round Bolt On
12 Bolt  BM 3.31
L48/M20
Nor - 07A
Daniel  
'69 SS 350/4 speed  Fathom Green--POP

camaro cat

  • Member
  • ***
  • Posts: 60
    • View Profile
Re: 1969, which pinion snubber
« Reply #4 on: March 09, 2013, 09:18:59 PM »
Round bolt on
BN 3:55
L/78,M-2?
02D Nor

Loren

Loren
1967 RS L30 10C LOS
1969 SS/RS L78 02D NOR

woodsman1172

  • Guest
Re: 1969, which pinion snubber
« Reply #5 on: March 09, 2013, 10:43:11 PM »
Push-in snubber
12 bolt 4.10 posi
302 with M21
VN 04A

copo69

  • Newbie
  • *
  • Posts: 19
    • View Profile
Re: 1969, which pinion snubber
« Reply #6 on: March 09, 2013, 11:23:36 PM »
push in
12 bolt BE 4:10
L72  M21
NOR 03E

crobjones2

  • Member
  • ***
  • Posts: 404
    • View Profile
Re: 1969, which pinion snubber
« Reply #7 on: March 10, 2013, 12:08:53 AM »
push in type
Nor 06A
BL 12bolt 3.07
L48 TH350
Chris
69 SS 350

KevinW

  • Hero Member
  • *****
  • Posts: 855
    • View Profile
Re: 1969, which pinion snubber
« Reply #8 on: March 10, 2013, 12:46:12 PM »
Just the plate was left

bolt on type
VN 05A
L48 M20
12 bolt 3.31

Push in type
NOR 10B early
10 bolt
LF7 PG

69Z28-RS

  • Hero Member
  • *****
  • Posts: 5778
  • owner since 4-Apr-1976
    • View Profile
Re: 1969, which pinion snubber
« Reply #9 on: March 10, 2013, 04:25:11 PM »
Mine isn't bolted on, so it must be what you're calling the 'push in' type?
Push in type
NOR 09C (Sep 69)
12 bolt  BU 3.73 Posi
Z28 w/M20
09C 69Z28-RS, 72 B 720 cowl console rosewood tint
69 Corvette, '60 Corvette, '72 Corvette
90 ZR1 red/red #246, 90 ZR1 white/gray #2466
72 El Camino, '55-'56-'57 Nomads, '55-'57 B/A Sedan

lynnbilodeau

  • Member
  • ***
  • Posts: 395
    • View Profile
Re: 1969, which pinion snubber
« Reply #10 on: March 10, 2013, 05:04:35 PM »
Yes, Gary, that is the push in type.
The rubber on the bolt in type is round and attached to a plate that bolts in to the two threaded holes on either side of the slot where yours pushes in.
Seems to be more push in types used.

copo

  • Member
  • ***
  • Posts: 98
    • View Profile
Re: 1969, which pinion snubber
« Reply #11 on: March 10, 2013, 06:42:23 PM »
bolt on wedge
12 bolt BE 4:10
L72  M22
NOR 06A

tmodel66

  • Hero Member
  • *****
  • Posts: 1212
    • View Profile
Re: 1969, which pinion snubber
« Reply #12 on: March 11, 2013, 03:33:52 AM »
bolt on wedge
12 bolt BE 4:10
L72  M22
NOR 06A


Are you sure this one hasn't been replaced? The reason I'm asking? This bolt on wedge type is what most vendors were selling when I built my car last year and I had to use my old one.  Mine was in good shape but I wanted a new one and they didn't sell them then.
Daniel  
'69 SS 350/4 speed  Fathom Green--POP

firstgenaddict

  • Hero Member
  • *****
  • Posts: 2882
  • caretaker of 1971 LT1's 11130 & 21783
    • View Profile
    • Groome Family Automobiles
Re: 1969, which pinion snubber
« Reply #13 on: March 13, 2013, 02:02:01 PM »
Works for me.
Mine is 08A
Lynn,
You stated you did not know the rear ratio, however with your car, having an 08A build date, could only be 3.73 or numerically lower as 4.10 was no longer offered after June.

James
James
Collectin' Camaro's since "Only Rednecks drove them"
Current caretaker of 1971 LT1's - 11130 and 21783 Check out the Black 69 RS/Z28 45k mile Survivor and the Lemans Blue 69 Z 10D frame off...
https://plus.google.com/photos/112392262205377424364/albums?banner=pwa

x77-69z28

  • Hero Member
  • *****
  • Posts: 1058
    • View Profile
Re: 1969, which pinion snubber
« Reply #14 on: March 13, 2013, 03:10:12 PM »
Lynn, my 05A Z-28 has 4.10's and is a push in snubber.
69 Z/28 X77 burnished brown, 711 int 05A bought in 78
70 Z28 forrest green, green int, M40, bk vinyl roof PROJECT
99 SS hugger orange 6spd NO TTOPS bought new 1 of 54
15 z/28 Arctic white, A/C 505 HP #251

 

anything