Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Tom76

Pages: [1] 2 3
1
Foreign Camaros / Re: Second last Camaro from Biel
« on: November 12, 2021, 08:29:48 PM »
The Camaro

2
Foreign Camaros / Re: Second last Camaro from Biel
« on: November 12, 2021, 08:24:01 PM »
The Rear Axle and TAG

It's for Sale in Madrid Spain or Germany.


3
Foreign Camaros / Re: Second last Camaro from Biel
« on: November 04, 2021, 07:23:24 PM »
Danke MO,

ich habe es vermutet dass es so sein könnte.

4
Foreign Camaros / Re: Second last Camaro from Biel
« on: November 01, 2021, 01:14:04 PM »
Hi MO,

Swiss-Camaro do not have "Body By Fisher", but GM Biel's are mounted in the engine compartment.

The chassis no. S9-685167
Rel. K-193-23

The number in the engine block: V1214MU.

I assume that the Camaro was assembled in Biel at the end of December 1968.
The release number K (code for 1968) speaks for it.
If the code K was used from 1.1.1968 (calendar year, not model year).


5
Foreign Camaros / Second last Camaro from Biel
« on: October 31, 2021, 05:51:04 PM »
Hello together,
I have a 68 Camaro 350SS that was assembled in Switzerland.
For this I got the gearbox number of the THM-350.
The numbers: B1L28D

Provided that I have seen this correctly, can this belong to a 68 Camaro?

Grtz tom

6
Foreign Camaros / Re: Swiss Camaro "Technische Spezifikation"
« on: April 22, 2021, 08:19:50 PM »
it is a dossier with 14 pages

7
Foreign Camaros / Swiss Camaro "Technische Spezifikation"
« on: April 09, 2021, 10:02:13 PM »
1967

8
Foreign Camaros / Re: Really Nice Swiss 68
« on: April 18, 2020, 11:00:22 AM »
I could see the Camaro, an absolutely original Camaro in all areas!
A 327 from Biel, all documents are visible.
Also the opening letter for the delivery of GM Suisse!

Very nice Camaro that is really rare!

Grtz Tom

9
Hi Kurt,
Yes it's a 350-cui.

The VIN is not known ...

Grtz Tom

10
Foreign Camaros / Re: Suisse Imported 1968 Convertible
« on: April 18, 2020, 10:42:06 AM »
Hi Kurt,
the code is difficult to read is V0423EE.
Imported is not clear, but it was redeemed on July 1st, 1968 in Zurich.
The GM Suisse badge was removed when repainting is lost.

Grtz Tom

11
Foreign Camaros / Re: Suisse Imported 1968 Convertible
« on: September 14, 2019, 06:33:30 PM »
The Paint ist Island Teal, the Stripe Color ist Black ( Original color ist white ? ).

12
Foreign Camaros / Suisse Imported 1968 Convertible
« on: September 14, 2019, 01:15:04 PM »
A nice original Camaro Convertible from 1968.
An import vehicle, but not by GM Suisse, but parallel import.
These often had a sticker instead of the "General Motors Suisse S.A. Bienne" in the engine compartment.
The sticker could be part orange / white, partly black / white.

VIN: 124678N426627
Engine: 327-Cui. 3-Speed THM-350, 18N426627 V0423EN
Body By Fisher:
04D
ST 68-12467 NOR 126817 BODY
TR 714 F2 PAINT


Grtz Tom

13
Foreign Camaros / Re: Various bumpers
« on: March 28, 2019, 06:23:00 PM »
It's a Swiss Owner with California Show-Plate  :)

14
Foreign Camaros / Re: Various bumpers
« on: March 26, 2019, 09:25:09 PM »
Hello Tim,
this is a true Swiss Camaro with the 283-Cui V-8.
The VIN is at the bottom of the picture.
The options were all the same for 1967 Camaros produced in Switzerland:

- Reduction 3.08: 1
- Differential brake standard
- Disc brakes in front
- Powerbrake
- Power steering
- windshield shower
- Windschield wiper 2 levels
- Rear windows defroster
- reversing lamp
- Engine and trunk lighting
- No radio (the customer had to buy sepparat)

In addition, two rear reflectors had to be installed below the bumper by the importer,
And the Daylight combined with the turn signals.

15
Foreign Camaros / Re: Various bumpers
« on: March 21, 2019, 06:52:15 PM »
Hello Tim,
thanks for this list!
Seems like these were explicitly ordered in Switzerland.
Thank you for your help!
Tom

Pages: [1] 2 3
anything