News:

Classified ads are not allowed on the forum.

Main Menu

Vinyl tops: '67-8 vs '69

Started by dale_z28, March 08, 2016, 08:20:38 AM

Previous topic - Next topic

dale_z28

I received a vinyl top from Rick's Camaros (Ecklers) and it was too short, front to back. I wondered if the top was cut for '67 or '68, but since I don't have access to either, perhaps someone on here can help. To top it off, they won't take it back because they have a 90 day return policy (and I accumulated several parts in advance). Even if they made the mistake. So I am stuck with a top that doesn't fit.

If I can find out if it is correct for another year I'll post it for sale on ebay. Otherwise, I'm up the proverbial creek....
'69 X33 02D   Since 11-29-'77

Details are trifles, but trifles make perfection. And perfection is no trifle.
~Ben Franklin

Sauron327

67-69 roof skins are the same. They should eat it. I will not deal with anyone with policies like that. It is an improperly manufactured product. How far beyond 90 days?

dale_z28

More than a year. I went by my bodyshop's BOM list and ordered most parts well in advance
'69 X33 02D   Since 11-29-'77

Details are trifles, but trifles make perfection. And perfection is no trifle.
~Ben Franklin

HawkX66

Quote from: Sauron327 on March 08, 2016, 08:38:52 AM
67-69 roof skins are the same. They should eat it. I will not deal with anyone with policies like that. It is an improperly manufactured product. How far beyond 90 days?
+1
Even if it is more than a year. These companies know people are buying the parts for restorations that can take significant time before the part actually gets installed. If you're just returning it because you ordered the wrong part or just don't want it that's one thing. Manufacturing defect like cut too short? Accept the return. No exception policies like this tell a lot about the company. Have you tried the manufacturer of the product itself instead of the re-seller?
Dave
69 SS396 X66 L34 M21 BS
Z23 711 U17 Hugger Orange
Semper Fi!

dale_z28

No, I have not. I considered buying a second top, then return the short one. Then sell the second (hopefully good, correctly cut new top) on ebay.
'69 X33 02D   Since 11-29-'77

Details are trifles, but trifles make perfection. And perfection is no trifle.
~Ben Franklin

lakeholme

My 68 vinyl top is 90 inches from the outside of the windshield trim middle to the outside of the rear deck trim middle. So front to back it would be at least 90 plus triming material.  Hope this helps.
How short is yours?
Phillip, HNR & NCR-AACA, Senior Master, Team Captain, Admin.,
Spring Southeastern Nationals chair, AACA National Director

dale_z28

Quote from: lakeholme on March 09, 2016, 07:48:32 PM
My 68 vinyl top is 90 inches from the outside of the windshield trim middle to the outside of the rear deck trim middle. So front to back it would be at least 90 plus triming material.  Hope this helps.
How short is yours?
Thanks for the measurement. I've got a pic somewhere showing this length. If I can't find it, I'll unroll it and measure again. For some reason, I was thinking the top was either shorter on '67-'68's or the trim possibly differed. Seems they were listed separately (from '69) in some catalogs. Thanks again, I'll post when I get home tonight.
'69 X33 02D   Since 11-29-'77

Details are trifles, but trifles make perfection. And perfection is no trifle.
~Ben Franklin