News:

Classified ads are not allowed on the forum.

Main Menu

Please post non camaro engine and tranny vin#'s you may have.

Started by tar6569, February 02, 2007, 03:20:07 PM

Previous topic - Next topic

tar6569

Hi, I do research on fullsize chevrolets and was wondering if members could post the numbers off any engines or muncies they have that might be out of a fullsize chevrolet or chevelle (not out of a camaro).  I need the casting number, stamped date and stamped vin#.

Thanks, Warren
Warren

1964-1970 fullsize Chevrolet research

rich69rs

I don't have this engine anymore - sold it.  In my notes, I can't find the casting number.  Howerver, I do remember reading in Chevrolet by the Numbers, (the early '60's book in this series), that in 1963 there was only one block casting used for a 327.  I do remember that the one casting number shown in the Chevrolet by the Numbers book that covered 1963 was the casing number of this engine.

Original VIN# unknown
Pad Stamp:  T0209R
T = Tonawanda, NY
0209 = Feb 9
R = 327; 1962-1964 full size Chevrolet, manual transmission.

C B 5 63   The "C" is not clear, it may be some other  casting mark. 
Block casting date; Feb. 5, 1963
Richard Thomas
1969 RS

rich69rs

From my 1966 Chevelle, which has been in the family since originally purchased in Decatur, IL by my grandparents at El Bauer Chevrolet on 30 March 1966.

VIN#:  136696F125994

Engine Block:  F0318DE
F =Flint Engine Plant
0318 = March 18
DE = 283 cid engine, 2bbl, 195 Hp, automatic (powerglide) transmission.

3849852   Block Casting Number   
C 13 6  = Block Casting Date; ( March 13, 1966)
Richard Thomas
1969 RS

1968RSZ28

Hi Warren -

  I have an original "owner's packet" (owner's manual, vehicle warranty book, emission control info pamphlet, etc.) for a 1968 Chevrolet Biscayne 4 door station wagon. The info off the protect-o-plate is:

- vin: 154358S210261
- engine assemble date: V0323DH
- differential assemble date: EU0321G
- automatic transmission assemble date: C8C20N

Hope this info is of help to you.  :)

Paul

tar6569

Yes it does.  I'm always looking for fullsize protectoplate info.

Could you send me the rest of the info off the protectoplate (trim, paint, carb, date and option codes)?  Also, could you send me the date and dealer given in the protection plan book?

Thanks, Warren
Warren

1964-1970 fullsize Chevrolet research

1968RSZ28

Hi Warren -

 Here's all the data off the protecto-o-plate:

B     DD          154358S210261  B
VO323DH       EU0321G            3
C8C20N               3 1               *

* = Chevrolet bowtie symbol.

The vehicle was sold by Placke Chevrolet, Inc. on 3-30-68.

I have all the original documents for this vehicle in excellent condition, so if you ever come across this vehicle in your research I would be happy to sell them to the current owner.  :)  Just email me through the CRG forum. Hope this info helps.

Paul

tar6569

The dealer was in St Louis, right?  Do you have any other stuff from the car like the invoice or window sticker?  Thought I'd ask.  I haven't seen this car before.  Where you get this owners manual set?
Warren
Warren

1964-1970 fullsize Chevrolet research

1968RSZ28

Hi Warren -

  Correct, St Louis, MO.  No, I don't have anything else you mentioned.

Paul    

RAfbody

Casting #: 3855961  (2 bolt)
Stamp date: T02I0EDH
Partial Vin: 6F120335
Russ