News:

Classified ads are not allowed on the forum.

Main Menu

1967 SMALL BLOCK V-8 PCV VALVE

Started by SSMUNDY, May 30, 2010, 07:56:59 AM

Previous topic - Next topic

SSMUNDY

I'm trying to figure out which is the correct PCV valve is for my 67 SS 350. The AIM shows part # 6422294 as the correct PCV  valve for my application. Is this similar to either the CV-726C (6421934) or the CV-590C (6422721) PCV valves? I've seen thes listed for sale on line, and the PC-509C is advertised for a 67 Z-28, and I've seen the CV-726C advertised for a 283 Camaro. They are quite a bit different looking, so I want to make sure I get the correct looking one for my car. Are either of these an accecptable replacement for the 6422294 valve? They appear to have different size nipples on the end for the hose to connect to. Any help would be appreciated. I just want to get the right one.
Thanks,
Sean

JohnZ

The AC-Delco website calls out the CV679C as the correct replacement PCV valve for the '67 Camaro 350.
'69 Z/28
Fathom Green
CRG

SSMUNDY

That's for an open system. I have a closed system. Sorry I should have started that before.

x77-69z28

is that the one that screws into the oil filler tube? my 12D 67 rs/ss has the 679c.
69 Z/28 X77 burnished brown, 711 int 05A bought in 78
70 Z28 forrest green, green int, M40, bk vinyl roof PROJECT
99 SS hugger orange 6spd NO TTOPS bought new 1 of 54
15 z/28 Arctic white, A/C 505 HP #251

SSMUNDY

Yes it is. The one I referenced on ebay showed a PCV valve with a nipple on both ends. Can you post a picture of your valve? If not on here, can you PM me a pic? I would really appreciate it.
Thanks,
Sean

x77-69z28

go on ebay and type in 67 camaro pcv. there are 39 hits. mine has the nipple on both sides, cv679c.
69 Z/28 X77 burnished brown, 711 int 05A bought in 78
70 Z28 forrest green, green int, M40, bk vinyl roof PROJECT
99 SS hugger orange 6spd NO TTOPS bought new 1 of 54
15 z/28 Arctic white, A/C 505 HP #251

JohnZ

The '67 closed system is shown in the Assembly Manual in section K24, sheet A2, and calls out P/N 6422294 for the PCV valve screwed into the bung in the oil fill tube.
'69 Z/28
Fathom Green
CRG

SSMUNDY

JohnZ,
That is correct. Does anyone have a pic of the 6422294 PCV valve? Does it look like the CV-509 valve? Or does it look like the CV-726 valve? Any help would be appreciated.


SSMUNDY

Flyingskibiker,
Thanks for the link. According to that the CV-726C (6421934) is the same as the 6422294. That's what I needed to know. Anyone need an original CV-590C still in the box cheap?
Thanks Guys for all your input,
Sean

flyingskibiker

I wouldn't know about the details...  RockAuto does say they are the same and sells them for $17.21.  I see one on ePay for $23.