News:

Classified ads are not allowed on the forum.

Main Menu

68 350 SS Air Cleaner Assembly

Started by Oregonjam, June 24, 2009, 10:36:32 AM

Previous topic - Next topic

Oregonjam

What would the correct AIR Cleaner Assembly be for a 1968 Camaro SS 350?

Thought it was an Open Element with perhaps a PCV inlet in base. What engine used that set up if not a 350 SS?
68 07D SS350
John

tom

my interchange book calls for :
6484222 single snorkel - 350 4bbl auto
6484223                    - 350 4bbl manual
69 X11 Z21 L14 glide
looking for a 69 export model (KPH) speed
o

lakeholme

Phillip, HNR & NCR-AACA, Senior Master, Team Captain, Admin.,
Spring Southeastern Nationals chair, AACA National Director

Oregonjam

Awesome, Thanks guys. That will send me on a new mission.
Found a pic in another thread for an auto here as well.

Thread name is:
Correct Air Cleaner Assembly for my 68 rs/ss 350?


Cheers,
John
68 07D SS350
John

Oregonjam

I have come across the Air Cleaner Below. I believe it to be a 1968 version but would like to confirm this.

It has the snorkel facing the drivers side and it is for an Automatic. It has the chrome lid for an SS.

I have always heard that the closed filter housings that had a rectangular hole on the base (shown in the pic on the right side) was specifically for a 1968 model.
Is this true?


68 07D SS350
John

gro51

That looks correct to me John, except I'm not sure about the rectangular hole.  But then again, I have a manual trans.
Joe
Schodack, NY

'68 SS/RS 350, M21, 3:73, Rallye Green, Black Deluxe Interior

Oregonjam

I assume the Rectangular hole is for something displayed in the AIM associatd with the PCV Valve.

Does anyone have a good page in the AIM that depicts this? Page 102 or UPC 6 - Sheet C7

My AIM is not readable in the center of the page enough to decifer this.

Thanks for all the help
68 07D SS350
John

Oregonjam

I am missing the airfilter that attaches to the side of tha air cleaner assembly. The filter was replaceable and now is offered as a reproduction:

http://www.rickscamaros.com/product.asp?pf%5Fid=EP%2D103&dept%5Fid=3152

Depending on where you buy it from I have seen it offered as black or white housing. Which color would be correct for my apploication?

Thanks for all you help.
68 07D SS350
John

68Zproject

If you're talking about the hole at the back of the base opposite the snorkel, my AIM shows a nipple that goes to a hose that connects to the passenger side valve cover.
68Z28

lakeholme

John,

As soon as I can get to a scanner, I'll send you a couple of pdfs of illustration pages that show what 68Zproject has described.
Phillip, HNR & NCR-AACA, Senior Master, Team Captain, Admin.,
Spring Southeastern Nationals chair, AACA National Director

Oregonjam

Phillip,
That would be geat. Thank You for your help in this.
68 07D SS350
John

lakeholme

Phillip, HNR & NCR-AACA, Senior Master, Team Captain, Admin.,
Spring Southeastern Nationals chair, AACA National Director