Is the VIN stamped on a TH350 Automatic for '69?

rjprice · October 09, 2007, 08:05:54 PM

Is the VIN stamped on a TH350 Automatic for '69? I found the date code on the pan but I was unsure if the VIN is stamped on the trans case. If so, where is it?

RamAirDave · October 09, 2007, 09:14:13 PM

Check the flange where the trans bolts to the engine, on the drivers side near the casting # on the block.

jl8dale · December 29, 2007, 09:50:34 PM

I have a LA Pace car with the 350 trans and it is on the passenger side on a flat area.
I have pics on another computer if you want me to send them to you.
Let me know.

JohnZ · December 30, 2007, 10:25:05 AM

As shown in the Assembly Manual (M38, Sheet A1), there were two VIN locations - one for Norwood on the driver's side, and one for Van Nuys on the passenger side.

jl8dale · December 30, 2007, 10:46:05 AM

Here's mine from an LA car.

DAL777 · December 30, 2007, 04:24:55 PM

My Norwood car has it on drivers side.
I have a pic but dont know how to post it. I can e mail it to you.

rjprice · December 30, 2007, 08:01:50 PM

I would like to see the Norwood example. Could you please email to rjprice@satx.rr.com.? I'm not sure where to look on my car. I guess I need a mirror to see it? Thanks!

rich69rs · December 31, 2007, 04:29:08 PM

Although not a TH350, the Powerglide in my Norwood 01C RS is shown in the attached pics in this e-mail and the next. Partial VIN is shown stamped into the casting, at the top, on the driver (LH) side.

rich69rs · December 31, 2007, 04:29:42 PM

Second pic

DAL777 · January 01, 2008, 07:59:45 PM

My stamp looks like Rich's.
I will send you a email.

rjprice · January 01, 2008, 08:06:51 PM

I have a Norwood smallblock/TH350. Can it be seen with the engine/trans in the car? I do have power brakes.

rjprice · January 01, 2008, 08:40:41 PM

Ok, I just found my VIN on the bell housing flange. It matches the other VINs and has the exact same font as Rich's example. Cool.

News:

Is the VIN stamped on a TH350 Automatic for '69?