Bronze pedal bushings?

[USA1968]

Greetings.
I was hoping to find an answer to this.

I have a 1968 Camaro SS. Does anyone make bronze bushings for the brake and clutch pedals?

I can find them for Mopar and BMW's but not Camaro's. All I can find is the plastic ones and people rave about the bronze ones for other makes.

Thank you.

[GMAD_Van Nuys]

You might try contacting this manufacturer of bronze bushings with the measurements needed for your 1969 Camaro:

https://www.bronzebushings.com/bushing_finder

[Petes L48]

Or you might see if a place like McMaster Carr has something off-the-shelf that would work.  NFI

https://www.mcmaster.com/products/bushings/?s=bronze+bushings

[169INDY]

Hum, Very interesting.
GM Plastic
UPC 7  C2 (CLUTCH)
PC 2
PN3798256
UPC 5  A3 (BRAKE)
PC 3
PN3798256

Establishing same PN for both pedals.

Discussion: The Factory and replacements have a spiral "split" on the inner sleeve portion of the bushings, most brass-bronze bushing are not split. Was this feature for lubricant retention or to allow for tolerance variations on the parts to accommodate "slop" and aide assembly.

This is a good hidden upgrade.