Adding factory Console Gauges And Replacement of Fuel Gauge with T3

[Chuck-68-Cam]

Yea I have pictures. Fuel was pretty straight forward. I ran red wire to pink post, green wire to brown post, black to ground and yellow to yellow connector from console harness. Then plugged it into the mounting hole provided. (without a bulb)

[Chuck-68-Cam]

For the Tach, I cut #2 brown wire from cluster plug. The brown wire comes from the coil negative side. I attached the yellow wire to the connector side and the red wire to the coil side and grounded the black wire. Then mounted it on the rail behind the cluster.

[Chuck-68-Cam]

More

[Chuck-68-Cam]

Just a follow up...Finally got the fuel down low enough for the low fuel light to trigger. Works like a charm, and the Tach is also spot on.