News:

Classified ads are not allowed on the forum.

Main Menu

Paint Compatibility

Started by abozny, May 02, 2017, 05:48:46 AM

Previous topic - Next topic

abozny

Hello, I have an all original 67 Camaro. The car was repainted over the original paint with a Lacquer paint. This paint started to lift off and now the paint does not look that good. Underneath I imagine is the original 1967 paint sanded down and painted over, but I do not know.

My question is, is it necessary to completely strip the paint to the metal if the original 1967 paint is there`? Or can the car be sanded down to the original primer and painted over with today´s modern paints?

If some paints would work better than others with the original primer, which paints would those be?

Thanks and Regards,
Allen

elcamino72

You will want to check with your paint jobber for their particular paint preparation requirements for their products but generally speaking you will need to apply a sealer over the lacquer.
Bryan Shook
Collector Car Law

Sauron327

When doing a complete such as yours, I strip all that old lacquer off and start from bare metal. Unless you are building a beater/driver and do not care how long the job will last and have money to waste.

vtfb68

Allen,
I have used a pressure steam cleaner to remove a repaint from a car. The poor repaint was also flaking off, but the clearly poor prep allowed the water to lift the paint off.
   It was free and took about an hour.
        VT

 
 
68 05C LA RS/SS U2 712 L34 M21 BR
68 08E LA RS Y2 749 L30 M35
67 11B LA  RS/SS M-1 797-Z L48 M21  Convertible

68camaroz28

Quote from: Sauron327 on May 02, 2017, 08:40:50 AM
When doing a complete such as yours, I strip all that old lacquer off and start from bare metal. Unless you are building a beater/driver and do not care how long the job will last and have money to waste.
X2! Believe 99 out of 100 good shops will tell you the same thing.
Chick
68 Z/28 NOR 01B Orig motor/trans/rear
69 Z/28 NOR 07A Orig Block & GM Cross-ram/carbs
69 L34 Rest. Nova Father/Son Car
69 L78 Surv Nova Purch 4/69 31K miles
67 L89 Corv Tribute
68 Corv 427/400 Orig motor
07 Corv Z06
R 68Z build- http://www.camaros.net/forums/showthread.php?t=182584

Mike S

 When dealing with paint that can cost well over $400/gallon (depending on color) and costly 2K primers you definitely don't want to reuse the old lacquer base.

Mike
67 04B LOS SS/RS L35 Hardtop - Original w/UOIT
67 05B NOR SS/RS L35 Convertible - Restored

abozny


Thanks for all the replies. The paint on my car is lifting, it is an acrylic and has no lead like the original paint. I am selling the car and want to tell the next owner that he will have to have the paint stripped basically to the metal and re-painted.

I wonder if anyone will even be interested in buying it! I live in Germany and was quoted 10,000 for a new paint job after stripping it down.

BULLITT65

Post some pictures of it! (please)
I have a 5th gen contact over there, and he loves buying old cars, especially F bodies. 
As for the paint, it all depends on what kind of paint job you want.  Sky is the limit on what you can pay for a paint job, but if the car is to be a driver than you don't need the perfect sheen on the door openings and all the detail work of a show car finish.
I agree with the above comments though, you definitely want it prepped correctly, no matter what quality of paint you go back with.
1969 garnet red Z/28 46k mile unrestored X77
-Looking for 3192477 (front) spiral shocks 3192851 (rear)
-Looking for an original LOF soft ray windshield
-Looking for original Delco side post negative battery cable part # 6297651AV

abozny

My pics are too big in size, can I somehow email you the pictures?

Thanks!