Messages

looks good, Steve still has my booster. I'm looking forward to see it.

Thank you, glad to see i'm not the only one in this situation.
I think I found a M/C casting 5460465. Should be here rebuilt in a couple of weeks.

So that picture is wrong ?
I'm trying to understand how the 5452310 (most likely after market) on my car worked for all these years.
I want to replaced it with a correct  m/c but I want to be sure what to look for and make sure a 5460465 will work.

According to the CRG article on master cylinder a 68 manual brake should have a master cylinder with casting number 5452310( without bleeders) and power should be 5460465(with bleeders).
On my car 4 drums power I have a 5352310, also if you look at the picture on the CRG article you see a picture of a master cylinder attached to a booster without bleeders !! Can somebody shine the light on that one ?
thanks

thank you every one for your inputs, I will let you know about the final result when I receive my parts back.

Did you polish it before sending it out? mine is pitted i'm afraid it will show even more after the dipping.
do you have a picture of it before you sent it?
thank you guys

Hi guys anybody used John Stuart for re manufacturing brake booster  ?  http://www.johnstuartpowerbrake.com/Power-Boosters.page
They offer zinc plating, I'm concern about correct finish.
thanks
sebastien

1968 Camaro

Hi Jeff did you go with zinc? how did it turn out? are you happy with the color or the coating?
thanks
sebastien

Hi Guys, everything was working fine on my 68 but I noticed the other day that my horn and my key buzzer did not work anymore.
Any ideas where I should start looking?
Wires are connected properly on the horn and on the horn relay.Fuse is ok.
thanks

c'est bon!

thanks Ed

sebastien

Where is the correct location for the clamp that holds on one of the power steering hoses ? (which bolt of the steering box cover) and which hose (return)? I think p/n is 9420534

1968 small block.

thank you

nice car, congrats!

Hey 68rsz28,if 68rs327 does not take your parts,I would be interested in your heat tube.maybe your heads as well.
I have a 68 327 2bbl mostly redone to factory condition, if you guys need pictures let me know.

another idea
http://www.carcapsule.com/