Author Topic: 68 RS wheel well mouldings  (Read 3260 times)

Rick68

  • Member
  • ***
  • Posts: 34
    • View Profile
68 RS wheel well mouldings
« on: April 25, 2012, 06:39:42 PM »
I was at a Camaro show last year and met a guy who gave me a photo copy of the template that was included with the GM wheel well mouldings for a 1968 RS.It shows where to cut the front mouldings since the rear ones were already shortened.Anybody out there need this?

vtfb68

  • Member
  • ***
  • Posts: 412
    • View Profile
Re: 68 RS wheel well mouldings
« Reply #1 on: April 25, 2012, 09:52:09 PM »
rick,
R/S mouldings going on a R/S should not have to be cut. This is from GM?
   VT
05C LA RS/SS U2 712 L34 M21 BR
08E LA RS Y2 749 L30 M35
"In the pursuit of accuracy"

acelr8

  • Member
  • ***
  • Posts: 43
    • View Profile
Re: 68 RS wheel well mouldings
« Reply #2 on: April 26, 2012, 02:14:02 AM »
Yes,they came with 880 & 881s from GM in the 70's right after they discontinued the RS only fronts

Rick68

  • Member
  • ***
  • Posts: 34
    • View Profile
Re: 68 RS wheel well mouldings
« Reply #3 on: April 26, 2012, 11:06:08 AM »
The instruction sheet is dated Feb 2 1974 and has a picture of the moulding and where to cut it and drill the hole for the screw.On the bottom of the sheet it says"REWORK REQUIRED WHEN USING UNIT 9785880-81 ON 1968 CAMARO RALLY SPORT (Z22).

vtfb68

  • Member
  • ***
  • Posts: 412
    • View Profile
Re: 68 RS wheel well mouldings
« Reply #4 on: April 26, 2012, 02:00:55 PM »
I bought 4 new 68 R/S wheel mouldings from Champion Chevrolet in Manhatten Beach in 1980. Installed them two years ago with a repaint, they fit perfect, came with small package of screws, all holes were correct, and no instructions at all.
   
  VT
05C LA RS/SS U2 712 L34 M21 BR
08E LA RS Y2 749 L30 M35
"In the pursuit of accuracy"

ChrisM

  • Member
  • ***
  • Posts: 47
    • View Profile
Re: 68 RS wheel well mouldings
« Reply #5 on: April 26, 2012, 10:09:57 PM »

Can you post a picture?

Rick68

  • Member
  • ***
  • Posts: 34
    • View Profile
Re: 68 RS wheel well mouldings
« Reply #6 on: April 29, 2012, 11:30:25 PM »
I have been trying to post pictures of the instruction sheet but I am having problems.Anybody have problems posting pictures?

69pace

  • Member
  • ***
  • Posts: 415
    • View Profile
    • TeamCamaro - Moderator
Re: 68 RS wheel well mouldings
« Reply #7 on: April 30, 2012, 12:30:15 AM »
Rick if you are actually posting the pic it maybe too large a file. If you have Google plus or other internet share account you can post it there then link here with no size restrictions.
1969 Z-11 350/300 with 4 Speed
TeamCamaro - Moderator

1968RSZ28

  • Hero Member
  • *****
  • Posts: 5214
    • View Profile
Re: 68 RS wheel well mouldings
« Reply #8 on: April 30, 2012, 01:09:58 AM »
I have been trying to post pictures of the instruction sheet but I am having problems. Anybody have problems posting pictures?

Rick, picture posting information can be found here...  http://www.camaros.org/forum/index.php?topic=7809.0

Paul

x77-69z28

  • Hero Member
  • *****
  • Posts: 847
    • View Profile
Re: 68 RS wheel well mouldings
« Reply #9 on: May 02, 2012, 05:36:29 PM »
rick, i could use a copy of the instructions. a friend of mine has a 68 RS and cant understand why his NOS mldgs dont fit. my email is rwagner@optonline.net
thanks
buddy
69 x77 burnished brown, 711 int 05A bought in 78
67 rs/ss 350 butternut yellow 4 speed 2nd owner
70 Z28 forrest green, green int, M40, bk vinyl roof PROJECT
99 SS hugger orange 6spd NO TTOPS bought new 1 of 54
11 cts-v blk diamond  edition wagon 556hp sick!

Rick68

  • Member
  • ***
  • Posts: 34
    • View Profile
Re: 68 RS wheel well mouldings
« Reply #10 on: May 04, 2012, 10:55:45 AM »
DO you have another E-mail because both times I tried to send it  and it came back.NOt only do I have problems posting pictures now I have problems sending E-mail !!!!!

1968RSZ28

  • Hero Member
  • *****
  • Posts: 5214
    • View Profile
Re: 68 RS wheel well mouldings
« Reply #11 on: May 04, 2012, 04:04:07 PM »
Rick,

Send the photo to me and I'll post it for you.   ;)

Paul

Rick68

  • Member
  • ***
  • Posts: 34
    • View Profile
Re: 68 RS wheel well mouldings
« Reply #12 on: May 07, 2012, 12:29:58 AM »
Paul
 What is your e-mail address so I can send you the instruction sheet for you to post for me.Thanks
                                             
         Rick

1968RSZ28

  • Hero Member
  • *****
  • Posts: 5214
    • View Profile
Re: 68 RS wheel well mouldings
« Reply #13 on: May 07, 2012, 04:49:10 PM »
Paul
 What is your e-mail address so I can send you the instruction sheet for you to post for me.Thanks
                                             
         Rick

Rick,

Click on my user name and you'll see it listed.

Paul

1968RSZ28

  • Hero Member
  • *****
  • Posts: 5214
    • View Profile
Re: 68 RS wheel well mouldings
« Reply #14 on: May 09, 2012, 06:52:17 PM »
Here are Rick's photos of the wheel opening molding modification instruction sheet for '68 Camaros equipped with Z22...



Thanks Rick!

Paul