Author Topic: windshield lower trim screw size and type info needed  (Read 1107 times)

zman1969

  • Member
  • ***
  • Posts: 127
    • View Profile
windshield lower trim screw size and type info needed
« on: March 13, 2012, 07:59:27 PM »
ready to install windshield trim and as you know the lower trim has clips and screws to attach to the cowl. I have searched forums and venders and what i have found is they are 5/16" hex head screws anybody know what size screw and the length? pics would be nice if you have any too!
Rich

69 RS/Z DZ302 Daytona bumble bee
69 T/A clone LS6/6sp
69 Nova SS 396

PURESS

  • Member
  • ***
  • Posts: 128
    • View Profile
Re: windshield lower trim screw size and type info needed
« Reply #1 on: March 13, 2012, 09:50:23 PM »
under search....     Documenting 1969 Fasteners
Marty did an excellent job   check there

zman1969

  • Member
  • ***
  • Posts: 127
    • View Profile
Re: windshield lower trim screw size and type info needed
« Reply #2 on: March 13, 2012, 11:09:01 PM »
I searched that and got this thread- nothing else
Rich

69 RS/Z DZ302 Daytona bumble bee
69 T/A clone LS6/6sp
69 Nova SS 396

1968RSZ28

  • Hero Member
  • *****
  • Posts: 5253
    • View Profile
Re: windshield lower trim screw size and type info needed
« Reply #3 on: March 13, 2012, 11:22:23 PM »
under search....     Documenting 1969 Fasteners
Marty did an excellent job   check there

I searched that and got this thread- nothing else

Here you go...  http://www.camaros.org/forum/index.php?topic=9074.0

Paul

67 RS Ragtop

  • Member
  • ***
  • Posts: 82
    • View Profile
Re: windshield lower trim screw size and type info needed
« Reply #4 on: March 14, 2012, 03:21:51 AM »
ZMAN

  email sent

zman1969

  • Member
  • ***
  • Posts: 127
    • View Profile
Re: windshield lower trim screw size and type info needed
« Reply #5 on: March 14, 2012, 03:27:16 AM »
that's a good article but didn't see what fasteners I'm looking for
email replied to
Rich

69 RS/Z DZ302 Daytona bumble bee
69 T/A clone LS6/6sp
69 Nova SS 396

69Z28-RS

  • Hero Member
  • *****
  • Posts: 3020
  • owner since 4-Apr-1976
    • View Profile
Re: windshield lower trim screw size and type info needed
« Reply #6 on: March 14, 2012, 04:19:18 AM »
Hi Rich,
I replied to your other message re your car; good luck on it!  :)

Since my cowl panel is off (since last week) when I saw your message i went down and took a couple of photos trying to get a pix of the screw head.  Actually, all of the screws under my windshiield were the same, but some appeared to have blank head markings (or maybe 43 yrs of crud?).. :)
Anyway, I removed one and then searched in the AMK catalog to see if I could find a match.  Attached are the photos I took.   I think AMK number B-11085 is the same (but different head marking)..
The first photo is with the screw lying beside the B-11085 in the catalog; the second is the best pix I could take of the head marking..  appeared to be a circle...?
Gary W / 09C 69Z28-RS, 72 B 720 cowl console rosewood tint
69 Corvette convertible, silver/black 350 hp,
60 Corvette white/red, 72 Corvette coupe, '70 Mach I 
90 ZR1 red/red #246, 90 ZR1 white/gray #2466
72 El Camino, '55-'56-'57 Nomads, '55-'57 B/A Sedan