Author Topic: Firebird and the Trans-Am series  (Read 203860 times)

tjs44

  • Newbie
  • *
  • Posts: 10
    • View Profile
Re: Firebird and the Trans-Am series
« Reply #135 on: March 05, 2014, 04:45:19 PM »
inside X ram

crazyamc

  • Member
  • ***
  • Posts: 53
    • View Profile
Re: Firebird and the Trans-Am series
« Reply #136 on: March 05, 2014, 06:20:05 PM »
Big applause! I LOVE to see the obscure parts posted! THANK YOU!  I have two questions; the offset on the carbs looks like they go the wrong way, (meaning it seems to me that they're sitting at the ends of the plenums..?   2.  The roof of the opening; was the distribution fixes and the cut away roof cast that way, or was it a 'dyno' mod?  Ken

tjs44

  • Newbie
  • *
  • Posts: 10
    • View Profile
Re: Firebird and the Trans-Am series
« Reply #137 on: March 06, 2014, 03:23:46 PM »
You have to realize the intake port arrangement is more like a BBC than a SBC,meaning no paired ports.To balance the flo they must have had  proof that it was better to have the carbs positioned where they are.I like a tunnel ram myself over a X ram.Pontiac had a factory tunnel ram avail over the counter for their 421 SD program way back in 1962.Tom

mike343sharpstick

  • Member
  • ***
  • Posts: 21
    • View Profile
Re: Firebird and the Trans-Am series
« Reply #138 on: March 06, 2014, 04:01:36 PM »
I remembered seeing this attached info elsewhere on THIS forum. There is so much information here on misc. TA cars and related engine technology it's incredible.
Note the picture on the upper-left, you can see where they are testing different carb configurations.

69Z28-RS

  • Hero Member
  • *****
  • Posts: 5778
  • owner since 4-Apr-1976
    • View Profile
Re: Firebird and the Trans-Am series
« Reply #139 on: March 06, 2014, 04:14:04 PM »
I didn't know much about Pontiac's '303' engine, so I had to do some digging.  I was curious about the bore/stroke relationship.. and for us 'over square' engine lovers (who love revs), all I can say is WOW... :)   Does anyone have an audio clip of this engine at 8-9 grand?? :)
Has any factory engine ever had a higher bore/stroke ratio than 4.125/2.84= 1.45 ????
"303 specs...


The 303's bore was identical to the 400 at 4.125 inches, but it featured a shorter stroke at 2.84 inches. The 303's short deck took off about 40 lbs. from the 400 V-8 version.  The racing 303 was equipped with four-bolt mains, a forged steel crankshaft, aluminum intake and a high-rpm crankshaft that allowed the engine to rev up to a whopping 8,000 revolutions per minute. Pontiac beefed up the main-bearing webbing to handle the high revs and reinforced the ribbing. The engine was a Ram Air forced induction model with Ram Air V heads and R/A-V cast-iron exhaust manifolds. The compression ratio was set at 10.75-to-1, and with an 800 cfm four-barrel Holley carburetor, it generated up to 525 horsepower. The intended production version, which would satisfy the SCCA homologation rules, would generate 355 horsepower.
"
« Last Edit: March 06, 2014, 05:39:55 PM by 69Z28-RS »
09C 69Z28-RS, 72 B 720 cowl console rosewood tint
69 Corvette, '60 Corvette, '72 Corvette
90 ZR1 red/red #246, 90 ZR1 white/gray #2466
72 El Camino, '55-'56-'57 Nomads, '55-'57 B/A Sedan

ko-lek-tor

  • Hero Member
  • *****
  • Posts: 1858
  • someday I'll get one finished
    • View Profile
Re: Firebird and the Trans-Am series
« Reply #140 on: March 06, 2014, 04:42:27 PM »
Dag Gawn, that's impressive!! I'm with you Gary, I want to hear one of those Indians 8K wail! Like you, I am going to read up on the 303 thanks to this post. Thanks guys and CRG.
Bentley to friends :1969 SS/RS 396 owned 79
1969 SS 350 (sold)
1969 D.H.COPO replica 4spd. owned since 85
1967 302 4 spd 5.13

Jon Mello

  • CRG Member
  • *****
  • Posts: 4413
    • View Profile
Re: Firebird and the Trans-Am series
« Reply #141 on: March 19, 2014, 01:34:02 PM »
I feel like I should be wearing a helmet and cape while posting these. Here are a couple of photos from Mike Scott, aka group/7. They are of a spectator's car in the parking lot at the 1970 Mosport Can-Am. I thought those trunk lid rear wings only came around as a result of the Fast & Furious films but here is the grand daddy of them all. Firebird GT47 rules;D
Jon Mello
CRG

satman

  • Member
  • ***
  • Posts: 94
    • View Profile
Re: Firebird and the Trans-Am series
« Reply #142 on: March 19, 2014, 04:53:07 PM »
I worked for a Canadian GM dealership back in the sixties and trust me there never was a factory built Firebird with a Chev engine but I guess the overworked tech staff decided to let it slide. In my opinion the Firebirds were not that well prepared and needed all the help they could get.

Al Richards

Jon Mello

  • CRG Member
  • *****
  • Posts: 4413
    • View Profile
Re: Firebird and the Trans-Am series
« Reply #143 on: March 20, 2014, 01:42:20 PM »
Al, there was a Firebird made within Pontiac somewhere that did have a Chevy engine installed in it and it was taken up to Terry Godsall's dealership in Canada as a ploy to convince the SCCA people that some Firebirds were equipped with Chevy engines north of the border. I do not think the Chevy engine was installed on the assembly line but I do think some paperwork was created to make the car appear legit. I don't think any of it was truly necessary as SCCA was willing to look the other way just to get Pontiac's involvement.
Jon Mello
CRG

Jon Mello

  • CRG Member
  • *****
  • Posts: 4413
    • View Profile
Re: Firebird and the Trans-Am series
« Reply #144 on: March 21, 2014, 01:41:11 PM »
Here's another picture of a '67 Firebird at the Mosport circuit, courtesy of Mike Scott (group/7). This shot was taken at the
1000K enduro in August 1984. No other known details about it. I don't recall another car trying to take aerodynamics to
that extreme on that style of body back in that era.

Jon Mello
CRG

1109RWHP

  • Member
  • ***
  • Posts: 222
    • View Profile
Re: Firebird and the Trans-Am series
« Reply #145 on: March 22, 2014, 12:52:54 AM »
I am glad that trend never caught on, at least over here. Japan has cars like that running around.

Jon Mello

  • CRG Member
  • *****
  • Posts: 4413
    • View Profile
Re: Firebird and the Trans-Am series
« Reply #146 on: March 22, 2014, 05:07:03 AM »
I agree. That's not a look that does anything for me.
Jon Mello
CRG

firstgenaddict

  • Hero Member
  • *****
  • Posts: 2882
  • caretaker of 1971 LT1's 11130 & 21783
    • View Profile
    • Groome Family Automobiles
Re: Firebird and the Trans-Am series
« Reply #147 on: March 28, 2014, 04:13:52 PM »
Here is an early configuration of Titus's 69 car, it has a duct taped 68 front bumper on a 69 styled body

https://revslib.stanford.edu/catalog/nc991hs6427

Better pic of the front end

https://revslib.stanford.edu/catalog/hx133kv3882
James
Collectin' Camaro's since "Only Rednecks drove them"
Current caretaker of 1971 LT1's - 11130 and 21783 Check out the Black 69 RS/Z28 45k mile Survivor and the Lemans Blue 69 Z 10D frame off...
https://plus.google.com/photos/112392262205377424364/albums?banner=pwa

Swede70

  • Member
  • ***
  • Posts: 305
    • View Profile
Re: Firebird and the Trans-Am series
« Reply #148 on: April 23, 2014, 09:10:41 PM »
Greetings,

Now for something completely different!  See link to pdf file of a Japanese motor racing magazine examination of the '69 T-G Racing Firebird Trans Am/SCCA Trans-Am effort.  I'd never seen the photo image depicting a Superbird/Charger Daytona high wing (plus discreet vents/bubbles on the top of each fender consistent with reproducing the concept entire) on the 1969 prototype before, hence something surely to mull.  Wait! - when was the Charger Daytona developed, and who was Paul Lamar befriending and chumming around with in period?  Fun regardless, and an alternative conception of Stardust memories...

http://www.rotaryeng.net/Japanese-TransAm.pdf

Mike K.

JoeC

  • Hero Member
  • *****
  • Posts: 501
    • View Profile
Re: Firebird and the Trans-Am series
« Reply #149 on: April 24, 2014, 01:24:31 AM »
I don't know if this has been posted but there is some interesting Firebird TA stuff here

http://musclecarfilms.com/1969_Firebird_Engineering_Cars_2.html

 

anything