Author Topic: Original plating  (Read 3459 times)

sam81663

  • Member
  • ***
  • Posts: 28
    • View Profile
Original plating
« on: January 08, 2011, 11:35:04 PM »
Can any one recommend a place that can replate fuel line and brake line clips.  Thanks Ron.
Ron                                                                                   Restoring 69 coupe-? Kirt S. knows more about my car than i do!        Once owned 68 ss 350 powerglide on column - 69 396 ss rs 4 speed - 69 307 auto on console

tmodel66

  • Hero Member
  • *****
  • Posts: 1212
    • View Profile
Re: Original plating
« Reply #1 on: January 09, 2011, 01:19:04 AM »
Contact Steve he does a good job on plating. Here's his  web address

www.Brakeboosters.com
Daniel  
'69 SS 350/4 speed  Fathom Green--POP

BlackoutSteve

  • Member
  • ***
  • Posts: 398
    • View Profile
Re: Original plating
« Reply #2 on: January 09, 2011, 07:51:41 AM »
Contact Steve he does a good job on plating. Here's his  web address

www.Brakeboosters.com

In blue?
Restoring my RHD 69 Jane in Melbourne, Australia.
http://www.usmuscle.com.au/Forum/showthread.php?t=2840

tmodel66

  • Hero Member
  • *****
  • Posts: 1212
    • View Profile
Re: Original plating
« Reply #3 on: January 09, 2011, 03:55:58 PM »
I really don't know what all colors or types of plating he does. He did tell me if I needed anything from chrome to cast to contact him and he would do it. I guess you could give him a call. His number (559) 875-0290.

BlackoutSteve

  • Member
  • ***
  • Posts: 398
    • View Profile
Re: Original plating
« Reply #4 on: January 09, 2011, 08:53:40 PM »
Fair enough.. Those clip were blue (some olive green, some drab red depending their size) and were painted from what I remember reading. :)
Only the blue size were used on Camaros..(?)

sam81663

  • Member
  • ***
  • Posts: 28
    • View Profile
Re: Original plating
« Reply #5 on: January 10, 2011, 08:34:14 AM »
E Mail sent to brake boosters. com. (Blackoutsteve) I am real sure my brake line clips are green the clip above in the pick was on fuel line. I understand what 3/8 means but what is the other mark in the pic. and thanks for steering me to Brakebosters.com. I can send a few things to him.

BlackoutSteve

  • Member
  • ***
  • Posts: 398
    • View Profile
Re: Original plating
« Reply #6 on: January 10, 2011, 10:00:52 AM »
Have you considered simply replacing them?
The first clip looks like GM3952717 or B-10024 on pg 147
Some of the brake clips are green. GM3952718 or B-10023 pg 147. 0.31 capacity.These were used on the 3/16 brake line but over the spring guard.

The next one you have looks like B-13388 on pg 146, but it's not blue.
Where did that clip come from off the car?
I have a 69 AIM and I don't see the corresponding GM number.

http://www.amkproducts.com/Catalog_PDF/138-150.pdf

sam81663

  • Member
  • ***
  • Posts: 28
    • View Profile
Re: Original plating
« Reply #7 on: January 10, 2011, 06:16:16 PM »
BlackoutSteve .The next one you have looks like B-13388 on pg 146, but it's not blue.
Where did that clip come from off the car?
I have a 69 AIM and I don't see the corresponding GM number.                                                                                                                                                                                                                                                                                                                                                                    Both clip picks are the same clip.Clip was on fuel line along with about 6 or 7 others. One seams a light blue.

BlackoutSteve

  • Member
  • ***
  • Posts: 398
    • View Profile
Re: Original plating
« Reply #8 on: January 10, 2011, 06:34:26 PM »
 :P
Ahh, I thought it was a different one.  ;D

69z28302

  • Member
  • ***
  • Posts: 377
    • View Profile
Re: Original plating
« Reply #9 on: January 11, 2011, 11:06:40 PM »
I dont know if this will help but it was discussed here before.
Mike

http://www.camaros.org/forum/index.php?topic=5213.msg37744#msg37744

Sauron327

  • Hero Member
  • *****
  • Posts: 905
    • View Profile
Re: Original plating
« Reply #10 on: January 12, 2011, 02:22:58 AM »
For color reference, these have never been installed.

sam81663

  • Member
  • ***
  • Posts: 28
    • View Profile
Re: Original plating
« Reply #11 on: January 12, 2011, 09:29:00 AM »
Thanks for the link 69z28302!  And what is that mark stamped in to Sauron327 clip ? Looks like an anchor in the picture.

BlackoutSteve

  • Member
  • ***
  • Posts: 398
    • View Profile
Re: Original plating
« Reply #12 on: January 12, 2011, 10:34:17 AM »
That would be the trade mark of the manufacturer.

I'm not 100% sure, but I think AMK may own the rights to that now.
Behind the front cover of their catalog, that anchor is the first in a list of other "AMK Trademarks".

See lower page 2.
http://www.amkproducts.com/Catalog_PDF/FC-5.pdf

JohnZ

  • CRG Member
  • *****
  • Posts: 4245
    • View Profile
Re: Original plating
« Reply #13 on: January 12, 2011, 03:23:19 PM »
Inline Tube also makes fuel/brake line clips (including the blue ones).

www.inlinetube.com
'69 Z/28
Fathom Green
CRG

sam81663

  • Member
  • ***
  • Posts: 28
    • View Profile
Re: Original plating
« Reply #14 on: January 14, 2011, 07:49:47 AM »
No way in a million years I would ever find that kind of information without CRG. BIG Thank you! I ordered catalog's from In line tube and amk.