Author Topic: 68 350 SS Air Cleaner Assembly (Read 10366 times)

Oregonjam · « **on:** June 24, 2009, 03:36:32 PM »

What would the correct AIR Cleaner Assembly be for a 1968 Camaro SS 350?

Thought it was an Open Element with perhaps a PCV inlet in base. What engine used that set up if not a 350 SS?

tom · « **Reply #1 on:** June 24, 2009, 04:30:09 PM »

my interchange book calls for :
6484222 single snorkel - 350 4bbl auto
6484223 - 350 4bbl manual

lakeholme · « **Reply #2 on:** June 24, 2009, 04:57:46 PM »

P&A says the same #s...

Oregonjam · « **Reply #3 on:** June 24, 2009, 05:22:53 PM »

Awesome, Thanks guys. That will send me on a new mission.
Found a pic in another thread for an auto here as well.

Thread name is:
Correct Air Cleaner Assembly for my 68 rs/ss 350?

Cheers,
John

Oregonjam · « **Reply #4 on:** June 25, 2009, 02:12:02 PM »

I have come across the Air Cleaner Below. I believe it to be a 1968 version but would like to confirm this.

It has the snorkel facing the drivers side and it is for an Automatic. It has the chrome lid for an SS.

I have always heard that the closed filter housings that had a rectangular hole on the base (shown in the pic on the right side) was specifically for a 1968 model.
Is this true?

gro51 · « **Reply #5 on:** June 25, 2009, 09:57:33 PM »

That looks correct to me John, except I'm not sure about the rectangular hole. But then again, I have a manual trans.

Oregonjam · « **Reply #6 on:** June 25, 2009, 10:04:44 PM »

I assume the Rectangular hole is for something displayed in the AIM associatd with the PCV Valve.

Does anyone have a good page in the AIM that depicts this? Page 102 or UPC 6 - Sheet C7

My AIM is not readable in the center of the page enough to decifer this.

Thanks for all the help

Oregonjam · « **Reply #7 on:** July 06, 2009, 05:32:02 PM »

I am missing the airfilter that attaches to the side of tha air cleaner assembly. The filter was replaceable and now is offered as a reproduction:

http://www.rickscamaros.com/product.asp?pf%5Fid=EP%2D103&dept%5Fid=3152

Depending on where you buy it from I have seen it offered as black or white housing. Which color would be correct for my apploication?

Thanks for all you help.

68Zproject · « **Reply #8 on:** July 10, 2009, 05:43:57 PM »

If you're talking about the hole at the back of the base opposite the snorkel, my AIM shows a nipple that goes to a hose that connects to the passenger side valve cover.

lakeholme · « **Reply #9 on:** July 13, 2009, 01:03:36 PM »

John,

As soon as I can get to a scanner, I'll send you a couple of pdfs of illustration pages that show what 68Zproject has described.

Oregonjam · « **Reply #10 on:** July 13, 2009, 02:46:23 PM »

Phillip,
That would be geat. Thank You for your help in this.

lakeholme · « **Reply #11 on:** July 13, 2009, 10:09:26 PM »

Those pages are on their way...

News:

Author Topic: 68 350 SS Air Cleaner Assembly (Read 10366 times)

Oregonjam

68 350 SS Air Cleaner Assembly

tom

Re: 68 350 SS Air Cleaner Assembly

lakeholme

Re: 68 350 SS Air Cleaner Assembly

Oregonjam

Re: 68 350 SS Air Cleaner Assembly

Oregonjam

Re: 68 350 SS Air Cleaner Assembly

gro51

Re: 68 350 SS Air Cleaner Assembly

Oregonjam

Re: 68 350 SS Air Cleaner Assembly

Oregonjam

68 350 SS Air Cleaner Assembly

68Zproject

Re: 68 350 SS Air Cleaner Assembly

lakeholme

Re: 68 350 SS Air Cleaner Assembly

Oregonjam

Re: 68 350 SS Air Cleaner Assembly

lakeholme

Re: 68 350 SS Air Cleaner Assembly