Author Topic: Sound Deadener Overspray  (Read 9599 times)

RonM

  • Member
  • ***
  • Posts: 66
    • View Profile
Sound Deadener Overspray
« on: October 01, 2008, 08:55:29 PM »
Hi all, I want to spray sound deadener on the rear wheelwells on my "68" and need to know if there was any overspray on the underbody when the factory sprayed it. I couldn't tell because the car was also undercoated. Thanks for any help, RonM.

JohnZ

  • CRG Member
  • *****
  • Posts: 4365
    • View Profile
Re: Sound Deadener Overspray
« Reply #1 on: October 02, 2008, 04:20:06 PM »
The photo below is a restoration, but it's typical of the factory sound deadener application in the rear wheel well.
'69 Z/28
Fathom Green
CRG

RonM

  • Member
  • ***
  • Posts: 66
    • View Profile
Re: Sound Deadener Overspray
« Reply #2 on: October 03, 2008, 02:49:36 AM »
Thanks John your picture shows exactly what I was looking for. RonM

copo69

  • Newbie
  • *
  • Posts: 19
    • View Profile
Re: Sound Deadener Overspray
« Reply #3 on: October 19, 2008, 03:37:27 AM »
John, At what point during assembly was the sound deadner applied?  What underbody components, if any, were installed prior to applying sound deadner.  When was the front applied?  Does anyone have any opinions on what's the best product tp duplicate the sound deadner?

JohnZ

  • CRG Member
  • *****
  • Posts: 4365
    • View Profile
Re: Sound Deadener Overspray
« Reply #4 on: October 19, 2008, 04:52:27 PM »
John, At what point during assembly was the sound deadner applied?  What underbody components, if any, were installed prior to applying sound deadner.  When was the front applied?  Does anyone have any opinions on what's the best product tp duplicate the sound deadner?

The sound deadener in the rear wheel well was applied in the Fisher Body Paint Shop, before any bolt-on underbody components were installed. The deadener on the tire side of the front inner fenders was sprayed on the inner fender by Chevrolet before it was assembled to the front clip in the off-line front sheet metal subassembly area.
'69 Z/28
Fathom Green
CRG

x77-69z28

  • Hero Member
  • *****
  • Posts: 1058
    • View Profile
Re: Sound Deadener Overspray
« Reply #5 on: October 19, 2008, 07:42:28 PM »
john, do you have a pic of the front wheelwell application. i got the rears done with some help from jerry M and ken lucas. not sure exactly how much of the wheel well was covered. the aim shows only the rear half of the well covered.
thanks
buddy
69 Z/28 X77 burnished brown, 711 int 05A bought in 78
70 Z28 forrest green, green int, M40, bk vinyl roof PROJECT
99 SS hugger orange 6spd NO TTOPS bought new 1 of 54
15 z/28 Arctic white, A/C 505 HP #251

JohnZ

  • CRG Member
  • *****
  • Posts: 4365
    • View Profile
Re: Sound Deadener Overspray
« Reply #6 on: October 20, 2008, 03:25:55 PM »
john, do you have a pic of the front wheelwell application. i got the rears done with some help from jerry M and ken lucas. not sure exactly how much of the wheel well was covered. the aim shows only the rear half of the well covered.
thanks
buddy

Design intent was to coat only the rear half of the inner fender, as shown in the A.I.M. - that was the highest area of stone impingement.
'69 Z/28
Fathom Green
CRG

x77-69z28

  • Hero Member
  • *****
  • Posts: 1058
    • View Profile
Re: Sound Deadener Overspray
« Reply #7 on: October 21, 2008, 03:38:11 PM »
thanks john. this was done before it was installed, correct?
buddy
69 Z/28 X77 burnished brown, 711 int 05A bought in 78
70 Z28 forrest green, green int, M40, bk vinyl roof PROJECT
99 SS hugger orange 6spd NO TTOPS bought new 1 of 54
15 z/28 Arctic white, A/C 505 HP #251

JohnZ

  • CRG Member
  • *****
  • Posts: 4365
    • View Profile
Re: Sound Deadener Overspray
« Reply #8 on: October 22, 2008, 01:04:29 AM »
thanks john. this was done before it was installed, correct?
buddy

That's correct.
'69 Z/28
Fathom Green
CRG

 

anything