Author Topic: Reproduction 1969 Camaro Coupe Shells  (Read 27239 times)

sdkar

  • Hero Member
  • *****
  • Posts: 737
    • View Profile
Reproduction 1969 Camaro Coupe Shells
« on: January 28, 2006, 05:29:54 AM »
For the 1969 Camaro I see they have the reproduction shells available in convertible.  Has anyone used these yet?  Have the hardtops been made yet as well?  Do they include the rear frame rails?  I am considering buying one if they have them since you can't seem to buy a coupe anywhere that is even remotely not trashed for a decent price.  Also, what are the titling issues if you build one from scratch?

Thanks,


Steve

Edgemontvillage

  • Hero Member
  • *****
  • Posts: 784
    • View Profile
Re: Reproduction 1969 Camaro Coupe Shells
« Reply #1 on: February 03, 2006, 05:24:25 PM »
Dynacorn, the manufacturer had a display at Barrett-Jackson which generated a lot of attention. Their reps were talking it up about the coupe however the company line is that the tooling is done and they are awaiting GM licensing approval which they don't have a time-line on but expect will received in mid to late 2006. I took a close look at the convertible shell they had on display and was quite impressed, the detailing is good and yes it does include the rear frame rails. As a general statement all the welded on parts are included and anything that is bolted on is not.

Lloyd.

Z71

  • Member
  • ***
  • Posts: 80
    • View Profile
    • Amsoil Jobber
Re: Reproduction 1969 Camaro Coupe Shells
« Reply #2 on: February 03, 2006, 10:50:37 PM »
Any hint of what the MSRP is going to be?
Mike
Owned new (and still have stashed away) LOL
1966 Impala SS396
1970 Chevelle SS454
1972 El Camino SS350
1973 Chevelle SS350
2002 Trans Am WS6 Ram Air

arocars

  • Member
  • ***
  • Posts: 28
    • View Profile
Re: Reproduction 1969 Camaro Coupe Shells
« Reply #3 on: February 05, 2006, 05:33:47 AM »
I read in a magazine that the coupes would be $2k more than the conv, so somewhere around $12,500. 

jamespizza

  • Newbie
  • *
  • Posts: 4
    • View Profile
Re: Reproduction 1969 Camaro Coupe Shells
« Reply #4 on: February 05, 2006, 04:23:44 PM »
the titling details vary from state to state, but in general will most likely follow the street rod path.  with the street rods, the vehicle is titled as the production vehicle it most resembles.  this is an easy one for us, if we use dynacorn's shell, as it most resembles a camaro/firebird.  then, instead of a VIN, they will probably create a number using the serial number of the shell, or some such combination.  i do not have specifics on the law as i have yet to be involved in a situation like this, i am just regurgitating information i have gathered up to this point.  perhaps someone among us has experience with street rods?
East Coast F-Body Nationals sponsored by New Jersey F-Body Owner's Association, are to be held August 20th, 2006.  Any questions email EastCoastNats@NJFBOA.org.

Look forward to seeing you!

Rich

  • CRG Coordinator
  • *****
  • Posts: 90
  • 68 L30/M20 RS
    • View Profile
Re: Reproduction 1969 Camaro Coupe Shells
« Reply #5 on: February 05, 2006, 08:49:07 PM »
Makes us 67-68 owners quite happy, knowing that 69s will become even more common... ;)
68 L30/M20 RS

olympic69

  • Member
  • ***
  • Posts: 74
    • View Profile
Re: Reproduction 1969 Camaro Coupe Shells
« Reply #6 on: February 06, 2006, 04:36:30 AM »
One of my pld Chevelle buddies used to call '69 Camaros belly buttons- 'cause everyone had one. I think a coupe would be cool, I would build it the way I want to!
Rob
Olympic Gold X33

"Its all crazy..."

buds396

  • Member
  • ***
  • Posts: 20
    • View Profile
Re: Reproduction 1969 Camaro Coupe Shells
« Reply #7 on: February 06, 2006, 01:50:38 PM »
I could not agree more Rich.

Bud
1968 RS/SS L78
Reading, Pa.

rich69rs

  • Hero Member
  • *****
  • Posts: 1109
  • LF7/M35/Z22/Z87
    • View Profile
Re: Reproduction 1969 Camaro Coupe Shells
« Reply #8 on: February 06, 2006, 06:48:22 PM »
Won't affect the price or desirability of an original 69 at all.  A reproduction is still a reproduction - doesn't matter what collector field (cars, antiques, etc) you're into.  Repos are just that - and will always command rero prices - not prices based on the real item. 

Problem will be those that try to decieve the uninformed by passing of the repro as original --- but that's already an old story that we deal with every day with the existing cloning / decieving issues that are already out there.
Richard Thomas
1969 RS

Buddy

  • Member
  • ***
  • Posts: 154
    • View Profile
Re: Reproduction 1969 Camaro Coupe Shells
« Reply #9 on: February 07, 2006, 08:38:30 PM »
Don't get too cocky...the 67 and 68's are coming soon.

dutch

  • Member
  • ***
  • Posts: 434
  • Documented Canadian 1968 Z/28
    • View Profile
Re: Reproduction 1969 Camaro Coupe Shells
« Reply #10 on: February 07, 2006, 09:39:47 PM »


Just my thought for the day after watching this post for a while...

   Doesn't it seem sort or crazy and ironic that the aftermarket sees a large enough market for the first gen body style to go to the expense to do all of this - yet GM doesn't see fit to try and retro / clone up a new model to satisfy those (I'm sure there is a substantial number out there) who don't want to or can't build one from scratch, yet have enough dough in hand to just buy that combo high tech / sixties feel for themselves?
   You don't see anyone repoping sixties Mustang clone bodies - maybe because there is a lack of enough interest - then again maybe the new retro model is taking up much of the slack or demand for such things and Ford is raking in the dough because they had enough forsight to do it right and in a proper timeframe...
Randy

z10kl

  • Member
  • ***
  • Posts: 65
    • View Profile
Re: Reproduction 1969 Camaro Coupe Shells
« Reply #11 on: February 08, 2006, 03:44:00 AM »
Yea they are going to make 67s also but I bet 69s outsell them 2 to 1.

Rich

  • CRG Coordinator
  • *****
  • Posts: 90
  • 68 L30/M20 RS
    • View Profile
Re: Reproduction 1969 Camaro Coupe Shells
« Reply #12 on: February 11, 2006, 11:02:10 PM »
100 to 1 would be even better... ;)
68 L30/M20 RS

lakeholme

  • Hero Member
  • *****
  • Posts: 2497
  • 68-12D L30/M35
    • View Profile
Re: Reproduction 1969 Camaro Coupe Shells
« Reply #13 on: February 12, 2006, 03:19:29 AM »
There is a "restoration" outfit near Charlotte, NC, where they have been putting new Corvette suspensions, etc. on 1st generation Camaros for a couple of years now.  They have a 69 repo shell and have just started building a car from the ground up. (I think it is for a magazine article.  Didn't catch which magazine.)  When I asked about the price, he said, "If you have to ask, you can't afford it!"  So, it strikes me that you would be spending a lot of money, and it would still be a reproduction... which would not hold value like an original.  Dutch is right.  If folks want a repo, GM should make one in the new Camaro.
They did let me drive a 69 with the vette front end, and I did not like it.  Felt awfully jittery on those back NC roads.
67... 68... 69... I'm just happy to have an original 1st generation! ;D
Phillip, HNR & NCR-AACA, Senior Master, Team Captain, Admin.,
Spring Southeastern Nationals chair, AACA National Director

69zman

  • Newbie
  • *
  • Posts: 7
    • View Profile
Re: Reproduction 1969 Camaro Coupe Shells
« Reply #14 on: February 12, 2006, 04:09:36 PM »
I doubt if they will come out with a 67 or 68 body. Why produce something that nobody really wants. There is a reason why  69s are like belly buttons, you would be a freak not to have one.Even GM knew better than to design the 5th gen. camaro after the 67 or 68. It's pretty much a no brainer.I see they are even showing it in Hugger Orange. The only color to have! Maybe all of you will grow up someday and get some real class.I know the real reason why 69's are priced higher than 67 or 68, it all comes down to the simple rule of supply and demand. Those that have them don't want to get rid of them and those that don't have one, wants one.
                                                  69zman

69zman

  • Newbie
  • *
  • Posts: 7
    • View Profile
Re: Reproduction 1969 Camaro Coupe Shells
« Reply #15 on: February 17, 2006, 12:34:10 PM »
Hey you 67 and 68 owners I meant the above comment to be a joke! I really thought I would get a jab  back!lighten up a bit! You want to take a jab? I've got two 66 mustang convertibles sitting in the same garage as my 69Z ! Now that is loading your guns for you!
                                                   69zman            Camaros rule! ALL!

lakeholme

  • Hero Member
  • *****
  • Posts: 2497
  • 68-12D L30/M35
    • View Profile
Re: Reproduction 1969 Camaro Coupe Shells
« Reply #16 on: February 18, 2006, 01:18:15 AM »
Actually, that makes sense to me... I used to own a 66 mustang, and it would take at least two of them to match your 69Z Camaro! ::)
Post us a picture of this Z!
If I could afford it, I'd own every year from 67 to 72. ;D
Phillip, HNR & NCR-AACA, Senior Master, Team Captain, Admin.,
Spring Southeastern Nationals chair, AACA National Director

69zman

  • Newbie
  • *
  • Posts: 7
    • View Profile
Re: Reproduction 1969 Camaro Coupe Shells
« Reply #17 on: February 18, 2006, 03:20:35 PM »
Finally! Somebody commented back! It took embarrasing myself by admitting that I have 2 66 mustangs. One is my wifes,the other...er..is mine.My 69Z is my love and a car that I wanted since I was 9 and got it 5 years ago. My wife got tired of riding shotgun with me at the local shows and cruise ins.she wanted a convertible and i tried talking her into a camaro but she likes mustangs.My mustang was a result of her mustang search.A year after getting her car a guy came back with a price on his mustang that I could not refuse! Yes it was more than a dollar!I plan on selling it this spring in hopes of getting another camaro, one that I can thump at the local drag strip.yes, I know I will have to throw in alot of money! yes, we both get jabbed at the local shows when we have our cars togrther!{Of couirse she gets jabbed more than I do} Dayton is a big GM town!I will post a picture of my car as soon as I figure out how!I will have to show her your comment about the muststangs! Lookout! bottom line is, alll older cars are neat! How boring would it be if everybody had a camaro! There would be no mustangs to pick on and we would be left to pick on each others years. what I find interesting are the stories why that one particlar car is their love.   69zman

project69

  • Member
  • ***
  • Posts: 23
    • View Profile
    • www.classicgms.com
Re: Reproduction 1969 Camaro Coupe Shells
« Reply #18 on: February 19, 2006, 02:57:19 AM »
with a good jig you can make your own...just need the 2 parts , off a doner car...front section/ rear dash...

Mr12771

  • Member
  • ***
  • Posts: 55
    • View Profile
Re: Reproduction 1969 Camaro Coupe Shells
« Reply #19 on: February 21, 2006, 01:07:02 AM »
Did anyone see the April 2006 Super Chevy magazine? It has an article on the new 67 coupe body from Dynacorn. 


lakeholme

  • Hero Member
  • *****
  • Posts: 2497
  • 68-12D L30/M35
    • View Profile
Re: Reproduction 1969 Camaro Coupe Shells
« Reply #20 on: February 21, 2006, 01:49:11 AM »
You might want to look at one of their websites, too.
http://www.dynacorn.com/site/04home/home.html
It will show you the 69 body --if you click on the Bodies Inc. button and then click on models.
I could not find a 67 body yet.
« Last Edit: February 21, 2006, 01:56:12 AM by lakeholme »
Phillip, HNR & NCR-AACA, Senior Master, Team Captain, Admin.,
Spring Southeastern Nationals chair, AACA National Director

ogbean

  • Member
  • ***
  • Posts: 99
    • View Profile
    • MySpace
Re: Reproduction 1969 Camaro Coupe Shells
« Reply #21 on: February 24, 2006, 05:33:36 PM »
Is there an expected date for the 68 coupes to be out?
David

1968 L30 4spd ???, Rally Green, White Vinyl Top, Ivory Houndstooth Interior (716), D55 console, D91 Stripe

zigman

  • Newbie
  • *
  • Posts: 12
  • reborn
    • View Profile
Re: Reproduction 1969 Camaro Coupe Shells
« Reply #22 on: March 01, 2006, 06:53:59 PM »
yeah the 67 and 68 shells are coming out, if anyone knows what they are looking at ,it wont be difficult at all to see what is and what isnt a "real" camaro, i hear dimensions ect are pretty wrong
thanks , mark

rich69rs

  • Hero Member
  • *****
  • Posts: 1109
  • LF7/M35/Z22/Z87
    • View Profile
Re: Reproduction 1969 Camaro Coupe Shells
« Reply #23 on: March 02, 2006, 02:48:30 AM »
A reproduction is a reproduction is a reproduction is a reproduction is a reproduction ,,,,,,,,,,,
Richard Thomas
1969 RS

 

anything