Author Topic: Quick Question  (Read 4119 times)

Emo1956

  • Member
  • ***
  • Posts: 165
    • View Profile
Quick Question
« on: March 17, 2019, 12:35:52 AM »
Has there ever been a 1969 Z-28 with a fiberglass Cowl Hood or any glass hood .. The reason I am asking is a just looked at 2 super nice Z-28,both had the cross ram on them and they both had glass hoods. I never remember seeing a Camaro with a stock glass hood but I have been wrong before .  Thank you in advance.

x66 714

  • Hero Member
  • *****
  • Posts: 1787
    • View Profile
Re: Quick Question
« Reply #1 on: March 17, 2019, 01:04:21 AM »
They never came with either 2x4 or glass from the factory...Joe
See America's First, Chevrolet

1968 Z/28 Corvette Bronze. Black Hounds Tooth. 02E Los Angeles born 3/13/1968 pnt OO. Purchased March 1976
1969 SS396 Yellow/Yellow 08E Norwood born 8/28/1969 pnt 76E. Purchased April 1981

Emo1956

  • Member
  • ***
  • Posts: 165
    • View Profile
Re: Quick Question
« Reply #2 on: March 17, 2019, 01:35:32 AM »
Was the glass hood a dealer option ? Did the 2x4 ever come in the trunk or was it a dealer option ?

x66 714

  • Hero Member
  • *****
  • Posts: 1787
    • View Profile
Re: Quick Question
« Reply #3 on: March 17, 2019, 01:38:55 AM »
Neither were options or accessories for that matter. They had to be purchased from the parts counter. There were special pages for those racing parts...Joe
See America's First, Chevrolet

1968 Z/28 Corvette Bronze. Black Hounds Tooth. 02E Los Angeles born 3/13/1968 pnt OO. Purchased March 1976
1969 SS396 Yellow/Yellow 08E Norwood born 8/28/1969 pnt 76E. Purchased April 1981

z28z11

  • Hero Member
  • *****
  • Posts: 1853
    • View Profile
Re: Quick Question
« Reply #4 on: March 17, 2019, 03:21:54 AM »
Here's the number for the hood, discontinued in the early '70s (at the same time as the disc brake 12 bolt rears, crossram conversion kits). It truly was a sad day, I remember thinking when I first read the article that I should have bought the crossram before it discontinued, as I had looked at one so equipped for sale in the fall of '71, about two years before I bought my X77. Hindsight is always 20-20 -

Regards,
Steve
1968 Z28 M21/U17 BRG/W 1967 Chevy ll Nova SS 
1969 Z28 X77/M20/VE3 LeMans/W
1969 L78 X66/N66 Cortez/BVT
1969 Z11 L48/M35/C60/C06  1949 3100 5wd 235/6

Emo1956

  • Member
  • ***
  • Posts: 165
    • View Profile
Re: Quick Question
« Reply #5 on: March 17, 2019, 11:38:41 AM »
Well I see the hood was made by GM for the trans am series and it was discuss here in 2011  http://www.camaros.org/forum/index.php?topic=8105.0. I thought this guy had  fake hoods on his Camaros.

z28z11

  • Hero Member
  • *****
  • Posts: 1853
    • View Profile
Re: Quick Question
« Reply #6 on: March 18, 2019, 12:44:52 AM »
They likely are (should I say possibly ?). There are several vendors that carry them as reproductions, GM fiberglass had to be exceedingly rare back in the day. I've known two cars that had them. one in '71, the other in the 90's, whcih was sold to a large Camaro parts vendor for mucho store credit (thousands) in the 90's, local car. The one in '71 was on a Z28 crossram equipped street car, Knoxville, TN.

Regards,
Steve
1968 Z28 M21/U17 BRG/W 1967 Chevy ll Nova SS 
1969 Z28 X77/M20/VE3 LeMans/W
1969 L78 X66/N66 Cortez/BVT
1969 Z11 L48/M35/C60/C06  1949 3100 5wd 235/6

Emo1956

  • Member
  • ***
  • Posts: 165
    • View Profile
Re: Quick Question
« Reply #7 on: March 18, 2019, 03:15:42 AM »
Hi Steve, there are 2 for sale in Ebay 1 for almost 12k and a Nos 1 for 15k. I have a line on a complete cross ram that is dated with dated carbs and the guy I do cars for is interested . How would tell a real 1 from a fake ! The Nos has the box,pin set and the box it came in. How much do you think a cross ram and hood combo would add to the value of a car ? Regards Emo

69Z28-RS

  • Hero Member
  • *****
  • Posts: 5778
  • owner since 4-Apr-1976
    • View Profile
Re: Quick Question
« Reply #8 on: March 18, 2019, 03:44:25 AM »
The crossram would certainly make it more costly and less comfortable to drive on the street...   Who cares what it does to the value?   Cars are to DRIVE...  :)
09C 69Z28-RS, 72 B 720 cowl console rosewood tint
69 Corvette, '60 Corvette, '72 Corvette
90 ZR1 red/red #246, 90 ZR1 white/gray #2466
72 El Camino, '55-'56-'57 Nomads, '55-'57 B/A Sedan

MO

  • Hero Member
  • *****
  • Posts: 1131
    • View Profile
Re: Quick Question
« Reply #9 on: March 18, 2019, 04:36:46 AM »
I have a friend with a 69Z and crossram setup. I've driven the car several times and I'm always amazed at how well it drives. Probably all in how you set it up.

uscrichter

  • Member
  • ***
  • Posts: 287
    • View Profile
Re: Quick Question
« Reply #10 on: March 19, 2019, 11:21:08 PM »
I have an original fiberglass hood that I bought in the early 80's and now just getting started to build my Z but the hood had just the prop rod and no hood pin set with it, does anyone know where I can find a period correct hood pin set? 

crossboss

  • Hero Member
  • *****
  • Posts: 779
  • ^ New engine project
    • View Profile
Re: Quick Question
« Reply #11 on: March 20, 2019, 12:01:31 AM »
Im no expert on these hoods, however, the T/A Camaro fiberglass hoods appear to be some sort of injection molded deal..(aka Corvette and Shelby 'glass). IF that is the case, that indeed would be expensive over the traditional/common hand laid matting/gel coat versions. Its possible the hood pins and related hardware are most likely from an outside/aftermarket sourced vendor? They, as others from 'back in the day' look very close to what Mopar and Ford used.
Just another T/A fanatic. Current lifelong projects:
1968 Olds 442 W-30
1969 Mustang Fastback w a Can-Am 494 (Boss 429)

ban617

  • Member
  • ***
  • Posts: 222
    • View Profile
Re: Quick Question
« Reply #12 on: March 21, 2019, 10:27:42 AM »
 I just recently saw a GM fiberglass Crossram hood for sale & I believe it had the hood pins with an installation diagram , Can’t recall if it also had the prop rod or not ... As far as buying a new hood Glasstek makes the hood that fits the Crossram air cleaner & it’s probably cheaper than the normal Camaro parts houses..

 

anything