Author Topic: 1967 Z-28 302  (Read 4121 times)

Bad ass Camaro

  • Member
  • ***
  • Posts: 69
    • View Profile
Re: 1967 Z-28 302
« Reply #15 on: January 14, 2018, 06:58:47 PM »
 I am guilty of turning a 1967 Camaro 302 into a race car. I don't remember it saying Z-28 back then but it was a original 302 Camaro, no spoiler 4 speed car. Camaros were very cheap to buy back in the day . Only if I knew like so many of us. The only 1 I kept was the 68 SS 396/375 that I bought in 1975 from the original owner. I've owned that car almost 43 years now. Crazy

BSMIT59

  • Member
  • ***
  • Posts: 132
    • View Profile
Re: 1967 Z-28 302
« Reply #16 on: January 14, 2018, 11:09:13 PM »
The 67 had no identifying emblems to say Z28 and would not have a spoiler. Only exterior clue would be the stripes...... but now every car has Z stripes. I see people with a beautifully restored SS and put Z stripes on it.....CRAZY
Barry     Old guy but still learning.....
Unrestored 67 barn find
67 SS 350 in process  ( in paint booth now)
Looking for N243673 to reunite V0320MO block and crank

x66 714

  • Hero Member
  • *****
  • Posts: 678
    • View Profile
Re: 1967 Z-28 302
« Reply #17 on: January 15, 2018, 01:04:33 AM »
I saw a beautiful 69 ss350 at Super Chevy get moved from stock to modify class because of Z stripes one year.....Joe
See America's First, Chevrolet

1968 Z/28 Corvette Bronze. Black Hounds Tooth. 02E Los Angeles born 3/13/1968 pnt OO. Purchased March 1976
1969 SS396 Yellow/Yellow 08E Norwood born 8/28/1969 pnt 76E. Purchased April 1981

bertfam

  • CRG Member
  • *****
  • Posts: 3330
    • View Profile
Re: 1967 Z-28 302
« Reply #18 on: January 15, 2018, 01:51:43 AM »
Some (not all) 3817173 balancers are date coded. Is yours?

Ed
Ed "Bert" Bertrand
email me!

Anorexicvega

  • Newbie
  • *
  • Posts: 3
    • View Profile
Re: 1967 Z-28 302
« Reply #19 on: January 28, 2018, 05:40:11 PM »
1967 Z28 engines never received the finned balancer.  My company, CHP has rebuild dozens of original '67 302 engines, judged at the Camaro Nationals many restored and original '67 Z28's and never has one turned up on an original engine. They were used in 1966 and have been seen on the '66 L79 engines. 

Have been running the national registry on these cars now for 30 years.  Yep, since 1988 and all of my data shows it was never used.  I hope this helps.

Jerry
         Jerry, what's the earliest "4L" stamped  production week registered?

1967 4K

  • Newbie
  • *
  • Posts: 2
    • View Profile
Re: 1967 Z-28 302
« Reply #20 on: February 11, 2018, 12:48:40 PM »
I agree with BA Camaro about all kinds of parts used on Camaros. My cousin went to work at the Norwood plant in 1968 and worked there until the plant closed. He told me they put them together with what parts they had. A lot of miss matched colors and whatever. He said in all his years at Norwood he never the word quality it was just production. Get em out the door and keep the line moving.
Richard

69Z28-RS

  • Hero Member
  • *****
  • Posts: 4819
  • owner since 4-Apr-1976
    • View Profile
Re: 1967 Z-28 302
« Reply #21 on: February 11, 2018, 11:14:02 PM »
I agree with BA Camaro about all kinds of parts used on Camaros. My cousin went to work at the Norwood plant in 1968 and worked there until the plant closed. He told me they put them together with what parts they had. A lot of miss matched colors and whatever. He said in all his years at Norwood he never the word quality it was just production. Get em out the door and keep the line moving.
Richard

'Production' and 'keeping the line moving' are keywords in *every* manufacturing facility, whatever the product.  If they don't maintain their required production rates, none of them will have a job very long...  How often a line worker hears the word 'quality' used probably depends how often the worker screws up...  :)
Gary W / 09C 69Z28-RS, 72 B 720 cowl console rosewood tint
69 Corvette convertible, silver/black 350 hp,
60 Corvette white/red, 72 Corvette coupe, '70 Mach I 
90 ZR1 red/red #246, 90 ZR1 white/gray #2466
72 El Camino, '55-'56-'57 Nomads, '55-'57 B/A Sedan

bcmiller

  • CRG Member
  • *****
  • Posts: 2504
    • View Profile
Re: 1967 Z-28 302
« Reply #22 on: February 15, 2018, 06:15:38 PM »
I am sure some incorrect things made it past the station where mismatched colors, etc. where put on the car originally. But there were inspections and quality control farther down the line. Most of that was probably fixed. Notice I said most, not all. Obviously things that were very minor made it through inspection.

There may have a slightly higher number of inconsistencies toward the beginning and toward the end of the model year.   
« Last Edit: February 19, 2018, 10:16:57 AM by bcmiller »
Bryon / 1968 Camaro SS 396 coupe - now 468 cubic inch BBC/M21
1967 RS/SS 396 coupe L35/M40 - 4 generation family project
Looking for 68 Camaro with body # NOR 181016

bertfam

  • CRG Member
  • *****
  • Posts: 3330
    • View Profile
Re: 1967 Z-28 302
« Reply #23 on: February 18, 2018, 01:33:57 AM »
I disagree with what you guys are saying about mismatched parts being installed on these cars. Chevrolet didn't even accept the order unless all the parts and sub assemblies were available. They would never start building a car without having everything they needed at hand. Chevrolet had an entire department dedicated to just this. It was their job to anticipate what would be required and make sure the parts were in stock to build cars. William and John have talked about this numerous times and a search should yield more detailed answers that mine, but this should get the general idea across.

Ed
Ed "Bert" Bertrand
email me!

bcmiller

  • CRG Member
  • *****
  • Posts: 2504
    • View Profile
Re: 1967 Z-28 302
« Reply #24 on: February 18, 2018, 05:40:15 AM »
Ed, I know what you are saying. But sometimes the “worker bees” just get the work done and upper management may not know the details. Been there, done that. :)

Now obviously I have no personal first hand knowledge of this for Camaro production, but for minor things, I sure would not be surprised if it happened. Not all day, every day, but occasionally. That’s what inspections are for (P T B). Again most of these things were fixed before leaving the assembly plant. 

« Last Edit: February 19, 2018, 10:18:02 AM by bcmiller »
Bryon / 1968 Camaro SS 396 coupe - now 468 cubic inch BBC/M21
1967 RS/SS 396 coupe L35/M40 - 4 generation family project
Looking for 68 Camaro with body # NOR 181016

jdv69z

  • Hero Member
  • *****
  • Posts: 1119
  • 69 RS Z/28 52E
    • View Profile
Re: 1967 Z-28 302
« Reply #25 on: February 18, 2018, 10:07:24 PM »
I'm sure the occasional wrong part got installed, but it seems like a lot of it these days is people trying to convince themselves they have something they do not using the assembly line error argument.
Jimmy V.

bcmiller

  • CRG Member
  • *****
  • Posts: 2504
    • View Profile
Re: 1967 Z-28 302
« Reply #26 on: February 19, 2018, 02:33:07 AM »
Yes I agree with that too. Wrong parts being installed would be a very rare thing.
« Last Edit: February 19, 2018, 10:19:13 AM by bcmiller »
Bryon / 1968 Camaro SS 396 coupe - now 468 cubic inch BBC/M21
1967 RS/SS 396 coupe L35/M40 - 4 generation family project
Looking for 68 Camaro with body # NOR 181016

westonz28

  • Member
  • ***
  • Posts: 59
    • View Profile
Re: 1967 Z-28 302
« Reply #27 on: February 23, 2018, 02:13:40 AM »
On my 1967 RS the steering wheel has a standard horn button not the RS. I know this is the way it came from the factory as my brother in law bought it new and it has never been worked on. All original numbers matching L30/M20 Camaro one repaint and new carpet and seat covers. Engine has never been rebuilt. The smog stuff has been removed if it ever had it.
67 RS L30/M20 numbers, 68 BB 396 12 bolt posi
68 Z28 project, 68 numbers 327/210 4 speed
69 LM1 turbo 350 12 bolt numbers,70 L65 350
68 Chevelle L30 3 on the tree, 68 El Camino BB