cooling fan and sticker mark on trunk deck

[Tx-Z 302]

this fan was in what was left of my trunk in a box with other odds and ends parts, not sure how to tell if its right or a production date, all i find is an "H" on the hub area and "front".    the deck lid has glue for a sticker, im not sure if it signifies anything or if they all had a sticker placed there?

[Tx-Z 302]

more pics

[Tx-Z 302]

more pics

[ZLP955]

'H' is for Hayes-Albion, which was an OE supplier to Chevrolet. More here: http://www.camaros.org/coolingsystems.shtml#fan
Some fans were unstamped whereas others had a number on the blades. That article via the above link should help ID yours.
Trunk lid adhesive residue is either from the jacking instruction or positraction (if that RPO was fitted) warning label.

[ZLP955]

Following above reply, just checked the trunk lid on my car and the jacking instruction label is in the center, like the one in your first picture, and the positraction warning label is on the right (passenger) side. The 1969 AIM also shows this arrangement under G80 sheet A1.

[69Z28-RS]

Here's what my original stickers look like under my trunklid

[Tx-Z 302]

Thanks for the help guys

[plumL78]

That's the correct L78 and Z28 fan. Don't let it grow legs

[Kelley W King]

Does that 5 blade fan fit other engines? It seems I have seen more of them around.

[z28z11]

That's the correct L78 and Z28 fan. Don't let it grow legs

It does have the appearance of the correct L78/Z28 '68 fan blade, but the proof is the bolt circle (should be 3-1/4")and clutch openings. The lo-po 5 blade with the 3.00" BC is marked the same, looks just like it except for the difference in the BC's and a smaller center hole. The fan clutch (non-Eaton) could look the same for both hi and lo-po applications, only the bolt circles tell them apart.

Regards,
Steve

[ZLP955]

Here's what my original stickers look like under my trunklid

Gary you're fortunate that your car still retains the plastic cap on the left hand shock thread - originals seem to be made of unobtanium!

[69Z28-RS]

Here's what my original stickers look like under my trunklid

Gary you're fortunate that your car still retains the plastic cap on the left hand shock thread - originals seem to be made of unobtanium!

Yes, when I first found that on the left shock, I was upset that the right one was missing..     

[Daytona Yellow 69 Z/28]

Here's what my original stickers look like under my trunklid

Gary you're fortunate that your car still retains the plastic cap on the left hand shock thread - originals seem to be made of unobtanium!

I found one of the shock plastic caps when I cut the left side quarter panel off my new 68 Camaro project last week. It was laying down between the quarter & the trunk drop off. 

[ZLP955]

Nice find!

[L78racer]

i need one of those fan blades if someone has one for a reasonable price. mine blew apart at the pure stock drags. '68 L78. i attached a pic but don't know if it will show up.