Author Topic: Original Oil Fill Cap - 1967 327 (standard engine ventilation system)  (Read 6699 times)

elcamino72

  • Member
  • ***
  • Posts: 105
    • View Profile
    • More Information on Camaro Fraud
What is the "correct" oil fill/breather cap for a 1967 L30 327/275hp with the standard engine ventilation system as shown in the 1967 Assembly Manual in UPC 6, sheet C5?  Also, I see that some restoration parts houses list a decal for the cap.  Was the decal an assembly line thing or is it an aftermarket/restoration thing?

Thanks

67rs327

  • Member
  • ***
  • Posts: 73
    • View Profile
Re: Original Oil Fill Cap - 1967 327 (standard engine ventilation system)
« Reply #1 on: October 23, 2013, 01:07:13 AM »
I'd like the answer to this question also. My '67 L30/M20 currently has the "can" style breather cap with the mesh inside. However, while cleaning a few things in the engine bay - I discovered what looks like the orig. cap wedged down in the fender well (bet that was a frustrating oil change afternoon back in the day - I think we've all dropped something and had it "disappear"!) Anyway, its showing its age and no sticker - but does have what looks like a number "5" or a stylized "S" in the center. Can't see any part number.
1967rs L30/M20 Bolero Red - LOS 11A.
Chris - New Hampshire.

67 RS Ragtop

  • Member
  • ***
  • Posts: 102
    • View Profile
Re: Original Oil Fill Cap - 1967 327 (standard engine ventilation system)
« Reply #2 on: October 23, 2013, 02:38:52 AM »
1967RS-NH

  I believe the cap you show in your post is for the "closed" pcv system  (RPO K24 shown in the AIM @ K24, sheet A2, page 267), that system has the pcv valve threaded into the  oil fill stand pipe, while the "open" system (shown in the AIM @ UPC L30, sheet A3, page 279, used the cap with the mesh in it. I personally spent a lot of time researching this very issue, and viewed some survivors before making my decision as to which cap was correct. Hope this helps to clear up these questions. JMO

JohnZ

  • CRG Member
  • *****
  • Posts: 4365
    • View Profile
Re: Original Oil Fill Cap - 1967 327 (standard engine ventilation system)
« Reply #3 on: October 23, 2013, 03:02:48 PM »
I'd like the answer to this question also. Anyway, its showing its age and no sticker - but does have what looks like a number "5" or a stylized "S" in the center. Can't see any part number.

The "S" on the cap rivet is for the Stant Manufacturing Co., who supplied the sealed oil fill caps.
'69 Z/28
Fathom Green
CRG

elcamino72

  • Member
  • ***
  • Posts: 105
    • View Profile
    • More Information on Camaro Fraud
Re: Original Oil Fill Cap - 1967 327 (standard engine ventilation system)
« Reply #4 on: October 23, 2013, 03:49:02 PM »
Yes, the cap shown by 1967RS-NH is for the RPO K-24 system.  The cap I'm referring to would be a breather and have mesh, but I am unsure what it is supposed to look like as there are many out there claiming to be correct.  Does anyone know what is assembly line correct for the oil fill/breather cap on a 1967 327 with standard engine ventilation? The assembly manual doesn't show enough detail to determine what the cap should look like.

Thanks

67 RS Ragtop

  • Member
  • ***
  • Posts: 102
    • View Profile
Re: Original Oil Fill Cap - 1967 327 (standard engine ventilation system)
« Reply #5 on: October 23, 2013, 04:36:00 PM »
 elcamino72,

  I have pics of two original caps (one from a '66 production vehicle, and one from a '67 production - with indents in top of the cap) that came off of '67's with the open pcv system, and I will send them to your posted email asap - hope they help. GW

p.s. you can repost or share these pics if you wish.

Petes L48

  • Hero Member
  • *****
  • Posts: 813
    • View Profile
Re: Original Oil Fill Cap - 1967 327 (standard engine ventilation system)
« Reply #6 on: October 23, 2013, 05:47:46 PM »
Here's a link to an older discussion at the TC site, may be of some use to you:
http://www.camaros.net/forums/showthread.php?t=207281&highlight=oil+fill+cap+327