Author Topic: 69 camaro multi leafs or mono  (Read 17724 times)

GS STAGE 1

  • Member
  • ***
  • Posts: 76
    • View Profile
69 camaro multi leafs or mono
« on: August 30, 2006, 01:01:40 AM »
Is there any chance my 327 2 bbl car came with multi leafs from the factory?
I read under suspension.......that all 12 bolts and 350 cars had them, but are there any cases where a 327 cars came so equipped?

GS STAGE 1

  • Member
  • ***
  • Posts: 76
    • View Profile
Re: 69 camaro multi leafs or mono
« Reply #1 on: August 30, 2006, 01:02:41 AM »
pic 2

KurtS

  • CRG Coordinator
  • *****
  • Posts: 5902
    • View Profile
Re: 69 camaro multi leafs or mono
« Reply #2 on: August 30, 2006, 02:06:14 AM »
About zero. Every 327 I've seen has monoleafs.
What is in the first box on line 4 of your car's BBC? I can't read it, but if you can, that should confirm it.
Kurt S
CRG

GS STAGE 1

  • Member
  • ***
  • Posts: 76
    • View Profile
Re: 69 camaro multi leafs or mono
« Reply #3 on: August 30, 2006, 02:39:10 AM »
Kurt, it appears to be an "I" or a "T"

GS STAGE 1

  • Member
  • ***
  • Posts: 76
    • View Profile
Re: 69 camaro multi leafs or mono
« Reply #4 on: August 30, 2006, 02:58:06 AM »
Couple more questions........

1) I just bought a 69 rear-(sept date) that was advertised as a multi leaf. When put side by side with a 76 multi rear, the spring pads are 1/4 inch smaller than the 76 rear, is this common with the later rears?
2) Is there any advantage of running the multi leafs, especially on a non performance car?

« Last Edit: August 30, 2006, 03:01:01 AM by GS STAGE 1 »

GS STAGE 1

  • Member
  • ***
  • Posts: 76
    • View Profile
Re: 69 camaro multi leafs or mono
« Reply #5 on: August 30, 2006, 03:01:54 AM »
pic 2

hotrod68

  • Hero Member
  • *****
  • Posts: 520
  • almost finished
    • View Profile
Re: 69 camaro multi leafs or mono
« Reply #6 on: August 31, 2006, 03:04:49 AM »
Dunno about '69s, but according to my GM books, any '68 Camaro 327 over the base 4bbl engine (327/250hp) should have had multi-leafs, and that also meant it had a 12-bolt, but they were rare as hen's teeth. No 2-barrel 327s seem to have had multi-leafs. I've seen a 327/275hp 4-speed '68 with a 12-bolt and multi-leafs, but only 1. Every 2bbl car I've ever seen had mono-leafs, '68 or '69. I guess it's possible, though.
HotRod'68  1968 SS350 coupe undergoing frame-off resto/rod. 386/350/4.11s
Butternut Yellow    black standard interior

RamAirDave

  • Member
  • ***
  • Posts: 334
    • View Profile
    • TheMuscleCarGuys.com
Re: 69 camaro multi leafs or mono
« Reply #7 on: August 31, 2006, 04:01:15 AM »
Those spring clamps dont look like the factory ones.  The originals I've seen have always had a type of rivet head holding them.  Leads me to believe they arent the originals.

Unless this type was available also?

dave
"Build them how the designers and engineers envisioned them to be"

www.TheMuscleCarGuys.com

rich69rs

  • Hero Member
  • *****
  • Posts: 1111
  • LF7/M35/Z22/Z87
    • View Profile
Re: 69 camaro multi leafs or mono
« Reply #8 on: August 31, 2006, 05:26:27 AM »
I would concur with Kurt that your 327/210 hp; 2Bbl small bore Rochester carb almost certainly had monoleaf springs from the factory; as is the case with my '69 RS with the same engine and carb.  (Also true for base 307's in later '69 production.)

The monoleaf spring rides very well - don't believe you'll be disappointed if you go that route.
« Last Edit: August 31, 2006, 05:34:18 AM by rich69rs »
Richard Thomas
1969 RS

GS STAGE 1

  • Member
  • ***
  • Posts: 76
    • View Profile
Re: 69 camaro multi leafs or mono
« Reply #9 on: August 31, 2006, 11:36:53 PM »
pic

GS STAGE 1

  • Member
  • ***
  • Posts: 76
    • View Profile
Re: 69 camaro multi leafs or mono
« Reply #10 on: August 31, 2006, 11:58:21 PM »
Is there any place on this site that breaks down the body broadcast copy??

KurtS

  • CRG Coordinator
  • *****
  • Posts: 5902
    • View Profile
Re: 69 camaro multi leafs or mono
« Reply #11 on: September 04, 2006, 05:27:04 AM »
Kurt, it appears to be an "I" or a "T"
Yup, probably a T...... and then another letter. :) Probably TN or TM. Might be tough to tell those apart.....
Kurt S
CRG

Greg69gg327

  • Newbie
  • *
  • Posts: 8
    • View Profile
Re: 69 camaro multi leafs or mono
« Reply #12 on: September 15, 2006, 06:40:15 PM »
I have one of the early model California made 69s 327/210 hp; 2Bbl small bore Rochester carb. 77900 original miles. It has mono leafs.  Don't know if this helps much but a sample of one.

cheers,  Greg

chevysscamaro68

  • Member
  • ***
  • Posts: 28
    • View Profile
Re: 69 camaro multi leafs or mono
« Reply #13 on: September 18, 2006, 02:21:36 AM »
I own a 1968 , I have a 10 bolt rear end w/ multi leaf springs.  I do not know if the rear end is original to the car or not.

JohnZ

  • CRG Member
  • *****
  • Posts: 4365
    • View Profile
Re: 69 camaro multi leafs or mono
« Reply #14 on: September 18, 2006, 03:43:38 PM »
Is there any chance my 327 2 bbl car came with multi leafs from the factory?

The multi-leaf springs in the photo are aftermarket replacements; factory multi-leaf springs looked like this:
'69 Z/28
Fathom Green
CRG

 

anything