News:

Classified ads are not allowed on the forum.

Main Menu

Sealant between the heater box and the firewall?

Started by BowtieSweden, July 19, 2011, 01:41:11 PM

Previous topic - Next topic

BowtieSweden

What type of sealant is used between the heater box and the firewall?

Thanks,
Gus
Camaro SS Conv. -69
Impala SS Conv. -67
Camaro SS Coupe -12

JohnZ

Quote from: BowtieSweden on July 19, 2011, 01:41:11 PM
What type of sealant is used between the heater box and the firewall?

Thanks,
Gus

None on the inside box ( the dash mat becomes the gasket between the inner box and the firewall). The engine side blower housing had a bead of neoprene or vinyl plastisol sealer applied in its groove before it was attached to the firewall.
'69 Z/28
Fathom Green
CRG

BowtieSweden

Thanks,

That was where I meant, in the engine compartment.
Any suggestions for products that are available today?

/ Gus
Camaro SS Conv. -69
Impala SS Conv. -67
Camaro SS Coupe -12

firstgenaddict

Almost any Black Body Sealer in a tube applied using a caulking gun. Ask at the Local Paint suppliers
James
Collectin' Camaro's since "Only Rednecks drove them"
Current caretaker of 1971 LT1's - 11130 and 21783 Check out the Black 69 RS/Z28 45k mile Survivor and the Lemans Blue 69 Z 10D frame off...
https://plus.google.com/photos/112392262205377424364/albums?banner=pwa

68rs327conv

I planned on using the 3m strip caulk when I put mine back on

Mike
Mike
68 RS Conv 327/210hp, Powerglide Factory AC