News:

Classified ads are not allowed on the forum.

Main Menu

Rear Axle Carriers

Started by cadmanof50s, June 24, 2011, 02:08:29 PM

Previous topic - Next topic

cadmanof50s

I have not been able to find any thing in-the CRG site on the different carrier series.
Is there a link that explains the differences and how one can identify which is which.

Thanks!

Vic
Vic Brincat
1968 Camaro RS Convertible - 327

bertfam

Vic, there will be a casting number on the carrier. Post that number and we can tell you what you have.

Ed

cadmanof50s

Thanks Ed,

I did have this number from an old picture I took a while back. But this is the Axle Code: BP0228G2 which tarnslates (below). I will get the casting number when I crawl under the car tonight.

Thanks!!

(Since 1968) it is a 2.73 Ratio 10 bolt - not posi
Built February 28th (1968)
at the Detroit Gear & Axle plant
in Shift 2

Vic


Vic Brincat
1968 Camaro RS Convertible - 327

cadmanof50s

The casting number is 3894859 NF.

Vic Brincat
1968 Camaro RS Convertible - 327

bertfam

Vic, the 3894859 is the casting number of the center section (some call it the "pumpkin") on the 10 bolt rear end. You can read more HERE.

Ed

cadmanof50s

Sorry Ed. This shows my ignorance.
Where do I look for the carrier casting number?

Do I have to remove the differential back cover to determine which series is in the rear axle?


Vic Brincat
1968 Camaro RS Convertible - 327

bertfam

The 2.73 axle used a 2 series carrier, so if the car still has this gear set, no, you don't have to remove the cover.

Ed

cadmanof50s

Thanks for the info Ed.

Vic
Vic Brincat
1968 Camaro RS Convertible - 327