30 30 cam

[pjbizjak]

What is the latest replacement solid lifter cam for the old 30/30?

[1968 Z28]

If you are referring to a cam that is exactly equivalent to the old 30/30......I bought the Comp Cams kit #CL12-107-3.  This is a kit that includes the cam and lifters.  It has been highly recommended in the past.

[Jerry@CHP]

That's what we use in all the 302's that we do.  And we make great power out of them.  Last one did 370 HP on the dyno.

Jerry

[pjbizjak]

Thanks Guys....Another question, keeping with origional 302 specs what type of valve springs and rockers should I use? 3917291 heads with 2.02's. BTW the ralley green 68 Z you have on your home page is exactly the same as mine except I have the Z/28 emblem on the front fenders and no wheel well trim.

Thanks again
Pete

[Jerry@CHP]

Use the Manley #43140 long slot rockers.  The are very tough too.  I have them on one of my race engines.  Good to 8400 rpm

I use a couple of different springs that I use and I like a couple that the major cam companies offer.  Use stock diameter!

Jerry