News:

Classified ads are not allowed on the forum.

Main Menu

69 Z header panel emblem placement to rally stripe

Started by NanDog, December 03, 2008, 10:19:25 PM

Previous topic - Next topic

NanDog

My Z is in the shop right now for new paint but after stripping it, it seems there's been two sets of mount holes for the Camaro emblem on the front header panel (it was painted once before, in 1977, and I'm wondering if the guy that did that job didn't lay down the stripes correctly and moved the emblem).  My current paint guy used to work for a local Chevy dealer back in the late '60s and early '70s and swears that the Camaro emblem touched the thin outside stripe. 

I've seen photos where that's true and also a lot of photos where the emblem is close, but not touching, the stripe.

What's right? 

Thanks!

JohnZ

Here's a photo of my untouched original - it's about 1/4" from the stripe.
'69 Z/28
Fathom Green
CRG


firstgenaddict

Unrestored 04C... stripe is 6 inches from the edge of the header panel...



James
Collectin' Camaro's since "Only Rednecks drove them"
Current caretaker of 1971 LT1's - 11130 and 21783 Check out the Black 69 RS/Z28 45k mile Survivor and the Lemans Blue 69 Z 10D frame off...
https://plus.google.com/photos/112392262205377424364/albums?banner=pwa