Oval floor plugs

[x66 714]

I search a little to find the answer but nothing positive. Were the oval floor plugs bare steel or galvanized or ? Thank you, Joe

[Danzo]

Joe, all the original ones I have seen have been galvanized.
Doc

[169INDY]

I found it VERY difficult to find a source for a "Restoration" finish matching the Galv appearance, So I resorted to Brite Zone as an acceptable alternative. Also seen them both Stamped and unstamped w/ date

[Sauron327]

And they are installed dome up, not down like many cars that roll into my shop.

[Danzo]

And they are installed dome up, not down like many cars that roll into my shop.

Original cars have been observed with both dome up and dome down.
Doc

[x66 714]

Thanks for all the information. I'll pass it down to pike....Joe

[MO]

Of the four 67's and one 69 that I have owned, all the "domes" were down. All LOS cars FWIW.

[x66 714]

My 1968 LA car, they're facing up. I've never had them out of the car....Joe

[red69]

69 12C plugs original and down.

[Sauron327]

It makes perfect sense why they should face dome up.
https://www.camaros.org/forum/index.php?action=search2

[56Chevynut]

It makes perfect sense why they should face dome up.
https://www.camaros.org/forum/index.php?action=search2

That link doesn't work for me. 

[Sauron327]

It makes perfect sense why they should face dome up.
https://www.camaros.org/forum/index.php?action=search2

That link doesn't work for me. 

https://www.camaros.org/forum/index.php?topic=2438.msg15587#msg15587

[Badshifter]

Both my 1 owner (then me) never touched 1969 Norwood 09c and 32k 01D Van Nuys Z28s are all dome up, on all 6.

[Badshifter]

Pics. Van Nuys Floors, Norwood Trunk

[rlw68]

I found it VERY difficult to find a source for a "Restoration" finish matching the Galv appearance, So I resorted to Brite Zone as an acceptable alternative. Also seen them both Stamped and unstamped w/ date

Yeah, I ran into the same problem trying to match that original galvanized look. I ended up using CRC Zinc‑It Instant Cold Galvanize on mine. It comes in a spray can, it's easy to use, and it's held up great. 

https://www.crcindustries.com/zinc-it-instant-cold-galvanize/