News:

Classified ads are not allowed on the forum.

Main Menu

Older washer bottles

Started by 69Z28, March 09, 2013, 05:21:51 PM

Previous topic - Next topic

69Z28

Would there be a problem if I put an old washer bottle in a bleach water solution to take away some of the stain and yellowing? I remember my mom  doing this to clean some of her kitchen stuff like tupperware and the like when it got stained. also, has anyone ever replaced the screen on the filter? Mine is toast and laying in the bottom of the bottle.


Thanks guys.
GaryC

'UNRESTORED' 1969 Cortez Silver Z28 X33 D80

68camaroz28

Hey give it a try but I tried bleach before and it did little if anything on our washer bottle. Keep in mind older service replacements are exactly like the originals (I could not find a thing different but my service replacement was obtained in the 80's). Not sure how newer service replacements are compared to originals. I think the original screens were brass so you might want to make one.
Chick
68 Z/28 NOR 01B Orig motor/trans/rear
69 Z/28 NOR 07A Orig Block & GM Cross-ram/carbs
69 L34 Rest. Nova Father/Son Car
69 L78 Surv Nova Purch 4/69 31K miles
67 L89 Corv Tribute
68 Corv 427/400 Orig motor
07 Corv Z06
R 68Z build- http://www.camaros.net/forums/showthread.php?t=182584

lakeholme

You could try white vinegar in the place of bleach.  If the stain and yellowing is on the inside of the bottle, pour in a handful of builders sand with your cleaning solution and shake it to "scrub" the inisde.
Phillip, HNR & NCR-AACA, Senior Master, Team Captain, Admin.,
Spring Southeastern Nationals chair, AACA National Director

69Z28

Thanks guys. I was just curious if anyone had done the bleach thing before. Might try the white vinegar/water solution first and see what happens. I hear vinegar helps in a lot of ways. Not actually looking for a pure white bottle, my car is an unrestored driver so I want to keep some patina. How about removing paint over spray? Any ideas here? Paint thinner will desolve the plastic I'm sure.
GaryC

'UNRESTORED' 1969 Cortez Silver Z28 X33 D80

tmodel66

Is the over spray on the bottle? If so try some rubbing compound.
Daniel  
'69 SS 350/4 speed  Fathom Green--POP

69Z28

Yeah, it's all over the top part almost covering the whole square including the cap. Not real heavy though. Is comet cleanser too abrasive or maybe something softer?
GaryC

'UNRESTORED' 1969 Cortez Silver Z28 X33 D80

68camaroz28

Try toothpaste or some other plastic cleaner/polish similar to what's used for headlight covers.  I have a tube of toothpaste with my car cleaners. I also use Novus plastic poliish products and confident they would remove but try the toothpaste first as its CHEAP. :)
Chick
68 Z/28 NOR 01B Orig motor/trans/rear
69 Z/28 NOR 07A Orig Block & GM Cross-ram/carbs
69 L34 Rest. Nova Father/Son Car
69 L78 Surv Nova Purch 4/69 31K miles
67 L89 Corv Tribute
68 Corv 427/400 Orig motor
07 Corv Z06
R 68Z build- http://www.camaros.net/forums/showthread.php?t=182584

69Z28

That's a great tip. Thanks.


Quote from: 68camaroz28 on March 10, 2013, 09:14:57 AM
Try toothpaste or some other plastic cleaner/polish similar to what's used for headlight covers.  I have a tube of toothpaste with my car cleaners. I also use Novus plastic poliish products and confident they would remove but try the toothpaste first as its CHEAP. :)
GaryC

'UNRESTORED' 1969 Cortez Silver Z28 X33 D80

lakeholme

I'd really like to know if the toothpaste works on the paint. Please let us know your results.
You really don't want to scrub the plastic hard on the outside or you'll scratch it.
Phillip, HNR & NCR-AACA, Senior Master, Team Captain, Admin.,
Spring Southeastern Nationals chair, AACA National Director