News:

Classified ads are not allowed on the forum.

Main Menu

10 bolt rear

Started by LILT, March 09, 2011, 09:51:21 PM

Previous topic - Next topic

LILT

In 69 were camaros made with 10 bolt posi rears. I am look to buy a 69 the owner said the rear is a 3:08 posi 10 bolt.Also can power brakes be added

Dusk_Blue_Z

1969 X77 01B 51 51 flat hood

bertfam

QuoteIn 69 were camaros made with 10 bolt posi rears.

Yes, posi was an option on any axle.

QuoteAlso can power brakes be added

Yes again. Check out UPC J50 in the AIM for what's required.

Ed

hotrod68

  I would beware..10-bolt positive-traction rear axles were rare unless the car is an SS, especially with 3.08s. '69s had the 8.2" ring gear and the car may have a later-model 10-bolt swapped in. The later 10-bolt is a good thing unless you want originality. To add power brakes all you have to do is put a booster behind the master cylinder. My 2 cents and hope this helps.
HotRod'68  1968 SS350 coupe undergoing frame-off resto/rod. 386/350/4.11s
Butternut Yellow    black standard interior

sixt9x33rs

Quote from: hotrod68 on March 19, 2011, 01:11:41 AM
  I would beware..10-bolt positive-traction rear axles were rare unless the car is an SS, especially with 3.08s. '69s had the 8.2" ring gear and the car may have a later-model 10-bolt swapped in. The later 10-bolt is a good thing unless you want originality. To add power brakes all you have to do is put a booster behind the master cylinder. My 2 cents and hope this helps.
Not so true in my searches...I have seen several 10 bolt 3.08 posi...as a matter of fact getting ready to by a convertible with one...jmo.
'69 RS Z/28 65B, 711 Flat hood no spoiler, endura, 4:10 43K miles
69 X77 Z/28 69 69 711 Original Paint Unrestored (Sold)
'69 X66 Convertible 69B 712 auto, (Sold) 44K miles