News:

Classified ads are not allowed on the forum.

Main Menu

Ignition buzzer and glove box installation

Started by SS396, October 03, 2010, 08:43:31 PM

Previous topic - Next topic

SS396

Did 68 Camaros have the ignition buzzer installed and if so was it all models. Is there any specific way to install glove box as mine wont go in. Do you have to remove the heater duct in front of console and come in from underneath?

flyingskibiker

The buzzer is in the voltage regulator.  So, they all came with it.  I don't recall ever seeing a different part for a VR w/o it.?.?

I'm pretty sure the glove box is put in from the back side.

Kelley W King

69 Z28 RS Scuncio Hi Performance
69 SS L78
67 SS Chevelle
64 Corvette
66 GTO Tiger Gold
77 Trans Am Special Edition

JohnZ

'69 Z/28
Fathom Green
CRG

JohnZ

'69 Z/28
Fathom Green
CRG


Kelley W King

Does anyone know what makes the ignition buzzer work on a four speed car? I know there is a contact in the column but does it have anything to do with the clutch switch or the reverse light switch. I checked the wiring diagram in the AIM but it crosses 3 pages and is not very clear. The reverse linkage from the column to the trans is not on my four speed car due to headers and the clutch switch is evidently not connected either.On my automatic car it does work when you open the door with the key in but that car has working reverse lights and no clutch switch.
69 Z28 RS Scuncio Hi Performance
69 SS L78
67 SS Chevelle
64 Corvette
66 GTO Tiger Gold
77 Trans Am Special Edition

JohnZ

Quote from: Kelley W King on October 05, 2010, 03:18:07 PM
Does anyone know what makes the ignition buzzer work on a four speed car? I know there is a contact in the column but does it have anything to do with the clutch switch or the reverse light switch. I checked the wiring diagram in the AIM but it crosses 3 pages and is not very clear. The reverse linkage from the column to the trans is not on my four speed car due to headers and the clutch switch is evidently not connected either.On my automatic car it does work when you open the door with the key in but that car has working reverse lights and no clutch switch.

There's no connection in that circuit to the transmission backdrive linkage or clutch switch; only from the plunger switch in the door jamb through the contacts in the ignition switch to the buzzer in the horn relay. The buzzer doesn't care what transmission is in the car or what gear it's in - onlly whether the jamb switch and ignition switch contacts are closed.
'69 Z/28
Fathom Green
CRG