1967 wt master cylinder

[67ssrsl78conv]

When my 67 was born was the wt master cylinder painted black or grey phosphate and what is the correct born with master cylinder cover look like?  Jeff

[67ssrsl78conv]

It's a 5e built in flint

[67ssrsl78conv]

I think I figured it out. Cast iron grey natural

[169INDY]

Normative Practice was Semi-gloss Black. Over the years the DOT3 fluid dripped and removed a lot of the Delco/Bendix as built paints.

[x66 714]

Normative Practice was Semi-gloss Black. Over the years the DOT3 fluid dripped and removed a lot of the Delco/Bendix as built paints.

Correct & they were machined after painting....Joe

[KurtS]

Definitely semi-gloss black. With cheap paint and no paint prep, the paint came off quickly.

[68camaroz28]

Normative Practice was Semi-gloss Black. Over the years the DOT3 fluid dripped and removed a lot of the Delco/Bendix as built paints.

Correct & they were machined after painting....Joe

And as Joe pointed out the two large surfaces on side and small indented area where stamped should be bare of paint due to machining surfaces after. A semi-flat clear works well to preserve no painted surface.