69 Camaro Clutch Cross Shaft

[jdv69z]

Ok, so I need to remove the clutch cross shaft to re-work my brake lines. Anyone have any tricks for re-installing it as there is a stud which has to slip into a fork mounted to the sub frame. The problem is reaching between the inner fender and the frame to re-install the stud into the fork, as it very close to the inner fender and getting my hand and/or wrench in there is tight. I'm working from inside the front wheel well with the tire removed.

[HawkX66]

Would it be easier to remove the subframe mount, mount the shaft, then re-mount it to the subframe? I can't remember it being very hard to get to.

[jdv69z]

 There are 3 bolts on the sub frame mount/bracket. The top one will not come out unless the inner fender is moved or bent. But I can move the bracket around with 2 of the bolts removed, and maybe that makes it easier. I'm going to find out, HaHa!

[Stingr69]

Its tight.  I do not recall much pain but I like to use the ratcheting box wrench.

[68Zproject]

I have unscrewed the ball off the block and taken it off that way.