Messages

Anyone ever find a good original style lower rocker molding clip for a 68? It look like the repops are junk. Or does someone have a few originals laying around. Dont need a complete set.

 Does anyone know if the gm outer door weatherstrip will work for 68 cars with upper door reveal molding?  I am refering to gm part# 7729998. I have a chance to buy some but want to make sure it fits the reveal molding

just need to know what year camaro recieved this trim in the deluxe interior? Was it just 67, 68 or 69 or all?

 Sorry, It was early, It is the stainless trim that is inside the car that runs along the headliner on both sides under the drip rail. where normally there is pinch retainer. Just need to know what year it was avialiable.

I saw a set of interior chrome trim on ebay. I was wondering what years it went on. I have a set I aquried and was thinking of listing them and want to be sure the applacation.

Anyone know the style of nuts and bolts, or a pic? that were used for the crossmember to mount to the subframe.

So on a 68 standard interior with a fold down rear seat, would the side panels be the same as a deluxe interior?

 Anyone have any pics on the brackets, factory installed,  for the fold down rear seat 68-9? I am installing one for a buddy in a 68,  and it came from a 68, seems that the passenger side is out from the floor 1/2 - 3/4 of a inch to where it should be.  I do not know if this was for the change in the shock mount? But when I put the pass. side bracket tight and tack it in the seat back is not even with the package tray. 1/2 inch driver side, 1 inch pass. Also, anyone know the factory height the seat shoud finish above the tray?
Thanks for any help!
Thanks

Does anyone know if someone reporduces original looking (style)  tie rod boots without having to buy the tie rod?
Thanks

I was wondering originally about the front and rear DRUM backing plate colors or plating.
Thanks

Were the rear end backing plates painted black with the rear or were they silver cad also?
Thanks

I was wondering what the original color, or acceptable finish of the front drum backing plate on a 1968 should be.

 I am getting ready to have my original 68, 5 leaf, SS rear springs,  sandblasted so I can re-paint them.  They have the 1 x 1 1/2 dimple at the end of each spring and I was wondering what color they originally were. I took them apart and in between the leafs they were painted semi gloss not the gray or natural like I normally see.  Also they were not held together with 3 rivited bands  but with 3 crimped bands, like you see in shipping. 

That was close, the last # is only 5 off.  Its like the lottery!

Sorry, I was refering to the louvered type, Not cowl type, Thansk for the input!