Topics

https://www.facebook.com/share/p/17sgNatqm5/

This block just came up on Facebook.

Ok can't seam to be able to load an image of the block stamping.
Tony

Came across this motor. Let me know if you have the car and I will connect you with the owner.
Tony

Found this on FB
https://m.facebook.com/groups/1818709758418958/permalink/3007783636178225/

Found on FB
https://www.facebook.com/groups/1818709758418958/permalink/3007893259500596/

Found this while kicking around on ebay.
https://www.ebay.com/itm/1967-Camaro-Chevelle-Impala-396-Block-3902406-406-D-11-7-STD/283772282658?hash=item4212256722:g:Er0AAOSwSwdeJODx

7L156356 2 bolt main
T0413MX 396/325 3 or 4 speed AIR

I checked on a project 69 camaro and the rear is a 12 bolt PC 0929 G. CRG has it as a 10 bolt 2:56 posi.
In Chevrolet by the Numbers it list it as a 12 bolt 2:56 posi. Anyone else come across this?

This tranny is for sale on the TC site. By. mrmuncie
http://www.camaros.net/classifieds/showproduct.php?product=64369&cat=8

Found this at local swap meet.

Found this yesterday at local swap meet.

Sorry about pic but reads as:

01E                          E
67-12637  NOR  80591
797-Z              S-2
W   3SL
4P 

I come across a 67 12 bolt 3:31 non posi and it has the bracket for the traction arm.
Did non posi's 12 bolts have the traction arm also?

Found on ebay

For Sale 1968 Camaro Muncie 4-speed Trans. This was an original 1968 CAMARO M-20.... Factory Stamped P8E16

The Vin# 18N444506 stamped on the this Muncie is from Camaro production in Norwood,Ohio started seq# 426001-448000 for May Camaro models.Wide Ratio "Two Grooves" This is a very RARE item for the right Chevy project wanting to match numbers.... I have not sent it off to the trans shop to be inspected.Your welcome to come and inspect before bidding.Sold as is,No Warranty.I would say plan on 100% restoring due to the age,however it could be fine.Please do your own research.All info was researched from the following "Chevrolet by the numbers"and "Authentic Restoration Guide" This 4-Speed Manual Muncie was used with Camaro 302/290 hp, 350/295 hp, 396//325,350 hp. Over seas bidders are welcome please email for shipping quote. Thank you

MainCase  #3925660

Extension Housing casting  #3857584

Frontbearing Retainer casting  #3915020
seller is hotrod-suzie

http://cgi.ebay.com/MUNCIE-4-SPEED-M21-TRANSMISSION-?cmd=ViewItem&hash=item27bebbb17e&item=170703696254&pt=Motors_Car_Truck_Parts_Accessories&vxp=mtr

HERE WE HAVE THE BEST REBUILT MUNCIE M21 4 SPEED MANUAL TRANSMISSION FROM THE YEAR OF 1967. THIS UNIT IS THE CLOSE RATIO MODEL. THE RATIO IS: 2.20-1.64-1.28-1.00-2.27  THE INPUT HAS 26TH WITH 1 LINE. AND THE CLUSTER GEAR COUNTS ARE 27-22-19-17TH. IT HAS THE 1 INCH PIN AND THE PRODUCTION DATE ON IT WAS JANUARY 6, 1967. THE CASE NUMBER IS 3885010. THE SERIAL NUMBER IS P7A06. THE BELL HOUSING NUMBER IS 464697. THE VIN NUMBER IS 7L135413. THIS UNIT HAS BEEN COMPLETELY GONE THROUGH REPLACING ALL BEARINGS, GASKETS, SEALS, SMALL PARTS AND SYNCHRO RINGS. THE BELL HOUSING HAD A SMALL 3/4 INCH CRACK BUT WAS PROFESSIONALLY WELDED AND WONT AFFECT THE PERFORMANCE OF THE TRANSMISSION. THIS IS IN FACT, THE BEST TRANSMISSION IN ITS CLASS ON EBAY!!!!!!!!!!!!! YOU WILL NOT FIND ANY BETTER! IF YOU HAVE ANY QUESTIONS, PLEASE FEEL FREE TO CONTACT CHARLIE AT 661-298-8827

Found this on racing junk.

The I.D # on the passenger side front block deck is T0109MY, the partial V.I.N. is 18L326299 & the casting # is 3916323. The heads and block are January '68 date codes. I have the block, crank, heads, pistons & rods. The block is standard but needs to be bored and the crank will need to be polished, possibly turned.

http://www.racingjunk.com/category/95/Street/post/2247035/Factory-I.D.-Code-68-Camaro-396-325hp-Engine.html

I have a 68 complete motor Vin 18N466515.

Found this pop for a 67 camaro 350 3 or 4 speed.
vin 124377L132403 reads

L       YY       124377L132403   R

V1122MS       QL0104G            S

P7T06           3 43  2

saler is    fab50sphil