Topics

124377N239834

ebay ad number 265751606509

seller - gabsi19 from coachella, california

i reported it to ebay admin too

Is it possible that a December build Z28 block didn't get a Vin stamp on it?

Does this stamp look like it could be original?

Vin 7N238969?
VO613MS?

19N582692 your trans is on ebay

P9A11A date stamp

Auction link https://www.ebay.com/itm/GM-Muncie-M-20-4-Speed-Transmission-date-coded-1969/294024796769?hash=item44753e5a61:g:1MMAAOSwof5gMaIi&LH_ItemCondition=4&redirect=mobile

Scot

I found this car in Laramie Wyoming for sale. No engine or trans with this car. It did have the 12 bolt with traction arm. I included pictures of the car and the protectoplate with trim tag. I was actually a nice car. I should have bought it. Was decently priced too. Missing lots of stuff but the body was worked. Notice it still had the traction bar plate on the floor still.

VIN 124377L149427
Engine TO316MK
Rear axle QS0314G
Trans R7C13
Madiera Maroon

Trim tag
03C          T605
ST 67-12437 LOS-28072
TR 760-Z    N-N
2LG 3D
4P 5B

I recently looked at a 69 Z close to me and wanted to share the information I found. I tried to get the VIN from the guy but he would not share it. Check out the pictures.

Trim tag
ST 69 12437 VN 270749
TR 712  79 79 PNT
03A  A422

No engine or trans.
Rear axle BU0224G2

The car had a trans with it but belongs to another car. 19L503265.

Were the underside of front fenders/extensions/valance/header just primed or painted body color prior to assembly? If you need specific year, I'm asking for 67's.

Thoughts on this Facebook car for sale?

124377L161847

06C                             J477
67-12437       LOS-37505
760-Z              L-L
2L  3L
4K

Wondering if my 68 SS/RS is in the database.  I owned this car many years ago and just ran across the info in one of my books that i wrote the info down. I dont have pictures of the engine or cowl tag anymore. Unless they are on a thumb drive in a box somewhere. Info below

Vin 124378L323934
396/325 hp
Motor casting 3916323 stamped T1226MY
Heads casting 3917215 dated L207
Intake casting 3883948 dated L227
Turbo 400 automatic no info on the trans.
Rear axle date cast K217 stamped PG1207G1 3.07 posi.

Body tag
02A
ST 68-12437 LOS 22861
TR 749  U-6 PNT

Lemans blue with white vinyl top and black houndstooth. It did have floor shift, console gages and a tic-toc-tac.  PS, PB, air conditioning, am-fm radio and style trim.

Glove Box tire label says 3934883 with the bow tie and AH in the middle.

If anyone comes across this car, I would love to buy it back.

Scot

Does anyone have their car apart that can show me pictures where the power top cylinder brackets go or how they are mounted? The bracket I am talking about is the upper one that the cylinder attaches to the car.

I've searched the forums but can't seem to find where someone posted about the pump tear down. I know I saw it. Does anyone know where that post was?

Guys look at the attached pictures and is it possible that this block can be cast Sept 30th  of 1966 with a assembly date of April 20 of 1967? The deck has broach marks but I am leary of this one because of the spread of cast vs build dates. What do you think?

Guys I need to reinstall my reinforcement plate on my convertible trans tunnel. Does anyone know what size bolts are used to bolt it up? I did a key word search for it on CRG nothing found for that. Also looked on many retailer sites. Help please.

Scot

Hopefully I am not being to anal here. But I noticed while restoring my seat belts for my 01B built 67 convertible that the buckles have numbers on them (7013 and 7063). All of the numbers seem to be within about 20 numbers of each. Belt webbing have tag dates of 49C66 and 52E66.  I know there was seat belt research done on these. But I never noticed the numbers before. One set of the numbers is on the underside of the buckle cover which you can't readily see. The other is on the back. The male portions of the buckles have H10 on all of them. Maybe Kurt will chime in here since he and I talked about these before and gave him the pictures of my 09C build car.

I've been offered this shifter for my 67 camaro. I just want to be sure it's a true muncie 4 speed shifter for my car. I looked at the research that CRG did. Its look correct. Please provide your opinion guys. I need to move fast if it's legit

Scot

Guys other than the rear portion of the convertible top differences, is there anything different at the front? Like the matches or the part that fits to the top of the windshield?

After a lengthy period of looking and weeks of negotiating. I have finally bought my project. As some of you might know, I have been looking at a 67 vert for a while. This car is an original Tuxedo Black with red interior and white top. I do want a deluxe interior and will replace the white top with a black one. Here is what I settled on. Pictures are of the trek to bring her home from Las Vegas to Salt Lake City. I have inventoried the parts and cleaned up what I could. Seems pretty complete except for motor and trans. I am planning a L30/M20 build. Looks like that was in the car at the born date. I have many questions about convertibles for those who are up to speed on them. I know plenty about the coupes. Not convertibles. Enjoy my attached pictures.
Vin 124677N169308


Scot

OK so I ran across another 67 Camaro in vegas.

Ive already decoded all the small stuff. But I want to know if the body sequence matches the Vin. Can someone chime in to tell me if it in line with both tags?


Scot

Just bought me this vert project for 12k

Guys can someone tell me what a typical price for a 67 vert. Yes I know it depends on options. The car I'm looking at has power top, RS, air, deluxe interior, gauges and v8. It has typical rust in floors, trunk and quarters.

Thank looking forward to your replies

Any information would be grateful

Here is a survivor. I asked the seller for the trim tag but he has not replied back. Its a very early car. Oct of 66? VIN is 124377L108678

https://sacramento.craigslist.org/cto/d/1967-camaro-rs-ss-survivor/6566415385.html

Kurt or someone who wants to record this Camaro for sale.

https://sacramento.craigslist.org/cto/d/camaro-1967-rs/6575047969.html

Hello everyone. Curious to know the width of the seat stripe on deluxe interiors. Also which company provides the best interior parts...seats covers for a restoration?  Of course I want as close as original as possible.

Thanks

Can someone recommend a good chroming business who might specialize in pot metal?