Messages

hello, does anyone know if someone or company makes a SS hood louver gasket for a 68 SS made of plastic (like a 67) instead of the sticky back foam gasket ? -------Thanks?

Thanks Bertfam!  ------------dan the man

Hi guys, I have a pair of steering arms with numbers 3902969 and3902970. Does anybody know what these arms go to ? I cant find these numbers anywhere including on the [ Pozziracing] site. I got them off a 68 BB man. steering car.They measure over 7 in. from ctr. of spindle to tie rod hole. Any help would be appreciated.    ------------thanks---------------dan the man

hello, can anyone describe the correct procedure to measure a pittman arm. I have received 2 arms supposedly 5 1/4 inches. I measured them using 2 parallel    lines c/l of large hole and c/l of stud.I sent the first one back to hbc and they sent another just like the first one. WTF, does anyone know where the measurements are centered to? Does anyone have one that measures 5 1/4 in center of hole and center of stud? Waiting for some clarity. Thanks--------------------Dan-the-Man

Hi guys! Just got my shipping data. Does anyone know which dealer with code 15 in zone 16 sometime in 68 & up was? My report states production date of 04/02/68 which is correct. The name and address of the dealer is  shown as Alamance Motors Inc. in Burlington, North Carolina. I Looked on the internet and found it was incorporated in 1987 ! Maybe part of family? Any help would be appreciated. Alamance is a county in N.C.  Thanks---------- dan the man.                   

Hi guys, what is the correct lower mounting for a 68 5 leaf shock? Is it a stud mounted in the shock or a double threaded bolt with 2 nuts and individual bushings?What about orig. part number?                      Thanks; Dan-the-man

 Hi guys, re:68 rs SS in La. tornado belongs to a Friend of mine. The car was stored 2 houses from my house. The tornado took the entire garage/shop,tools,etc. The car received heavy damage to the pass. door and every body panel has some damage,including the convertible top frame and interior water damage. My rs SS coupe is in my garage and suffered no damage. PTL  Both cars are numbers matching rs SS big blocks. Plans for restoration are already underway !                                   
  Dan the man                                                                                                                                               

Hi. Does anyone have any opinion on re-pro wood steering wheels? Is there an acceptable brand that is closest to original? I don't feel like spending $$$$$$$ on a cracked-up original. Congrats. Jerry on your class win at Indy. We were parked almost next to you-F/SA--STOCK ELIMINATOR-  09 Challanger drag-pak.       Thanks, dan-the-man

Hi, My car body has a build date of 04A on the trim tag. The first week in April 68 started on a monday. The last 6 numbers on the VIN tag is 407219,  Norwood built 1968  RS/SS 396,325hp. The sequential unit number is 107276. What would be the assembly date of the complete car Any help would be appreciated, thanks!

Thanks Smith69z for the offer! Sorry i took so long to reply,just got back from Indy. I found a tee at a friend's shop in his misc. drawer. Thanks,  Dan The Man.

Thanks Paul,. this is a hose kit installed about 6 mos. ago. Just found the tee broken. I temp. repaired it with a universal tee. Looks like c - - p.

Hi, does anyone know where I can find a vac. (T) for a 68 R.S. headlamp covers? It's the one that goes in front of the rad. support on pass. side. The p/n in the assenbly manual is 3929938.  I don't want a universal type that you cut to size!        Thanks, D.T.M.

Thanks Paul, i appreciate the help

Hello everyone, does anybody know who sells a Muncie re-build kit for a m22 ?  Rick's says that their kit, RC-114 for a m21 is different.  What is different?

Thanks Ed I figured it was a sales gimmick